Published May 30, 2025 | Version v1

ASSESSMENT OF THE EFFECTIVENESS OF THE COMBINED USE OF FERRATES AND ADSORBENTS IN THE PROCESSES OF WASTEWATER TREATMENT FROM METHYLENE BLUE

Description

As it is known, one of the common dyes in industry and everyday life is methylene blue: it is used to dye fabrics (silk, wool, cotton). Methylene blue is used in analytical chemistry to determine chlorates, perchlorates, mercury cations, tin, magnesium, calcium, cobalt and cadmium and in medicine as an antiseptic and antidote. Methylene blue is also used to assess the sorption capacity of activated carbon. However, its residual content can negatively affect the quality of the environment, especially its water component.

This article presents the results of studies on the efficiency of purification of water solution of methylene blue with concentration of 1 mg/dm3. At the first stage, oxidation with sodium ferrate was applied, which resulted in the removal of the dye by 75%. Due to the high toxicity and biocidal activity of methylene blue, additional water purification is required before discharging it into a reservoir. Pre-oxidized water with a residual dye concentration of 0.26 mg/dm3 was treated with a sorbent, which was activated carbons based on coal raw materials from russian and myanmar deposits. It has been shown that the total degree of water purification > 97% is achieved when water comes into contact with Tijit activated carbon (Republic of Myanmar) at a dose of 3 g/dm3 for 60 minutes.

Files

16-29.pdf

Files (794.0 kB)

Name Size
md5:2f0e626f6767a7c042bb86ad10663209
794.0 kB Preview Download