Published April 30, 2025 | Version CC-BY-NC-ND 4.0
Journal article Open

Exploring the Wear Resistance Behaviour of Chromium and Titanium Oxides on 17-4 PH SS in 3D-Printed vs. Cast Structures

Creators

  • 1. Lecturer, Department of Mechanical Engineering, Government Polytechnic College Sikar, (Rajasthan), India.

Contributors

Contact person:

Researcher:

  • 1. Lecturer, Department of Mechanical Engineering, Government Polytechnic College Sikar, (Rajasthan), India.
  • 2. Head & Professor, Department of Mechanical Engineering, National Institute of Technical Teachers Training and Research, Chandigarh (Haryana), India.

Description

Abstract: This study investigates impact of titanium dioxide and chromium oxide coatings on 17-4 PH stainless steel components, comparing samples produced through Additive manufacturing and Conventional manufacturing methods. SEM analysis is performed to evaluate the impact of coatings on performance of 17-4 PH stainless steel components. The study examined the microstructure and wear behavior of titanium dioxide and chromium oxide coatings on precipitation hardening martensitic stainless steel (17-4 PH), which is widely used in the oil and gas industries. Macro Hardness test is also performed on both AM and CM with Chromium oxide and Titanium dioxide Coatings and they are compared with noncoated samples. The use of titanium dioxide and chromium oxide coatings significantly improved these properties in both instances. SEM and EDS were used to analyse the microstructure of material and its wear mechanisms. XRD study also done to obtained information about phase composition of feedstock powders. The wear tests were conducted utilizing a pin-on-disc tribometer equipped with pins that had various coatings. The wear resistance exhibited considerable variation attributed to the differing coatings on the pins. The study provides insights into optimizing stainless steel components for enhanced durability in harsh environments.

Files

H053311081125.pdf

Files (1.1 MB)

Name Size Download all
md5:1d905ddd42fbde58676b1d623966c540
1.1 MB Preview Download

Additional details

Identifiers

DOI
10.35940/ijbsac.H0533.11080425
EISSN
2394-367X

Dates

Accepted
2025-04-15
Manuscript received on 06 March 2025 | First Revised Manuscript received on 16 March 2025 | Second Revised Manuscript received on 03 April 2025 | Manuscript Accepted on 15 April 2025 | Manuscript published on 30 April 2025.

References

  • An overview of current status of cutting fluids and cooling techniques of turning hard steel Pay Jun Liew , Ainusyafiqah Shaaroni , Nor Azwadi Che Sidik , Jiwang Yan 2017. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.06.077
  • Bending properties of lightweight copper specimens with different infill patterns produced by material extrusion additive manufacturing, solvent debinding and sintering, Gonzalez-Gutierrez, J. et al. (2021) Applied Sciences (Switzerland), 11(16). DOI: https://doi.org/10.3390/app11167262
  • Additive Manufacturing Techniques in Manufacturing - An Overview K.Satish Prakasha , T.Nancharaihb , V.V.Subba Raoc 2017 DOI: https://doi.org/10.1016/j.matpr.2017.11.642
  • Comparative Studies of the Properties of Copper Components: Conventional vs. Additive Manufacturing Technologies Witold Malec, Joanna Kulasa, Anna Brudny, Anna Hury, Bartlomiej Adamczyk, Ryszard Rzepecki , Robert Sekula , Grzegorz Kmita and Andrzej Rybak 2024 DOI: https://doi.org/10.3390/met14090975
  • Advantages and Drawbacks of Additive Manufacturing A. Vranić, N. Bogojević1, S, Ćirić Kostić1, D. Croccolo, G. Olmi2 2017 DOI: http://dx.doi.org/10.5937/IMK1702057V
  • A Critical Review on Materials in Additive Manufacturing Technologies Abhishek Kulkarni, Surendra Kumar Yadav 2024 DOI: https://doi.org/10.1007/s40033-024-00813-6
  • Different Types and New Applications of Stainless Steel October 2018 S. K. Dutta https://www.researchgate.net/publication/330383386_Different_Types _and_New_Applications_of_Stainless_Steel
  • Properties of precipitation hardening 17-4 PH SS manufactured by powder metallurgy technology, Kazior, J.et al. (2013) Advanced Materials Research, 811, pp. 87–92. DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.811.87
  • Mechanical behavior of 17-4 PH SS processed by atomic diffusion additive manufacturing, Henry, T. C. et al. (2021) International Journal of Advanced Manufacturing Technology. The International Journal of Advanced Manufacturing Technology, 114(7–8), pp. 2103–2114. DOI: https://doi.org/10.1007/s00170-021-06785-1
  • Comparative analysis of additive manufacturing over conventional manufacturing B Subramanyam, TV Vineeta, P Garre IOP Conference 2018 - iopscience.iop.org DOI: http://doi.org/10.1088/1757-899X/455/1/012102
  • A Review of Conventional versus Additive Manufacturing for Metals: Life-Cycle Environmental and Economic Analysis Asma Mecheter , Faris Tarlochan 1 and Murat Kucukvar 2023 DOI: https://doi.org/10.3390/su151612299
  • Review on : Titanium dioxide Adawiyah J. Haider, Zainab N. Jameel b, Imad H. M. Al-Hussainib a Department of Applied science, University of Technology, Baghdad(10066),2018 DOI: http://dx.doi.org/10.1016/j.egypro.2018.11.159
  • Correlation between microstructure, chemical components and tribological properties of plasma-sprayed Cr2O3-based coatings, Q. Yang, et al. (2018), Ceramics International, vol. 44, no. 9, pp. 10154- 10168, 2018. DOI: https://doi.org/10.1016/j.ceramint.2018.03.004
  • A perspective on plasma spray technology A Vardelle, C Moreau, NJ Themelis Plasma Chemistry and2015 Springer DOI: http://doi.org/10.1007/s11090-014-9600-y
  • A review of Nano powders preparation based on spray technology Aimin Chu et. al, (2024)J Mater Sci (2024) 59:15117–15139 J Mater Sci (2024) 59:15117–15139. DOI: http://dx.doi.org/10.1007/s10853-024- 10116-6
  • Thermal spray coatings on high-temperature oxidation and corrosion applications–a comprehensive review, Results in Surfaces and Interfaces, N. Lakkannavar, et al.(2024), vol. 16, p. 100250, 2024. DOI: https://doi.org/10.1016/j.rsurfi.2024.100250
  • Additive manufacturing: 3D printing for prototyping and manufacturing. Gebhardt A and Jen steffan hotter (2016),' Hensar. DOI: http://doi.org/10.1007/978-1-56990-583-8
  • Experimental Investigations on Wear and Mechanical Properties of Post Heat Treated AM 17-4 PH SS Parts Gunjan Chauhan, Prof. Niraj Bala, Prof. S.S. Dhami 2023 DOI: https://doi.org/10.22214/ijraset.2023.54368
  • Relationship between Brinell hardness and the strength of structural steels P Organek, B Gosowski, M Redecki - Structures, 2024 – Elsevier DOI: https://doi.org/10.1016/j.istruc.2023.105701
  • Influence of hardness on the wear resistance of 17-4 PH stainless steel evaluated by the pin-on-disc testing JD Bressan, DP Daros, A Sokolowski Journal of materials 2008 – Elsevier DOI: http://dx.doi.org/10.1016/j.jmatprotec.2007.11.251
  • High-performance and functional fiber materials—a review of properties, scanning electron microscopy SEM and electron dispersive spectroscopy EDS B Mahltig, T Grethe - Textiles, 2022 DOI: https://doi.org/10.3390/textiles2020012
  • Mechanical properties and microstructural characterization of selective laser melted 17-4 PH stainless steel. Mahmoudi, M., Elwany, A., Yadollahi, A., Thompson, S. M., Bian, L., & Shamsaei, N. (2017) Rapid Prototyping Journal, 23(2), 280–294. DOI: http://doi.org/10.1108/rpj12-2015-0192
  • Corrosion of additively manufactured alloys: A review G. Sandera,b, J. Tanc , P. Balanc , O. Gharbia , D.R. Feenstraa,b, L. Singerd , S. Thomasa,b, R.G. Kellyd , J.R. Scullyd and N. Birbilise 2018 DOI: http://doi.org/10.5006/2926
  • Determination of Hardness of High-Strength Steels by Brinell Method. Part 2. Improvement of the Method and Measurement Results OA Katok, MR Muzyka, VP Shvets, AV Sereda Strength of 2022 Springer DOI: http://doi.org/10.1007/s11223-022-00456-6
  • Microstructure and Sliding Wear Resistance of Plasma Sprayed Al2O3- Cr2O3-TiO2 Ternary Coatings from Blends of Single Oxides (2020) Maximilian Grimm , Susan Conze , Lutz-Michael Berger, Gerd Paczkowski , Thomas Lindner and Thomas Lampke DOI: https://doi.org/10.3390/coatings10010042
  • Mechanical properties of fibre reinforced polymer composites: A comparative study of conventional and additive manufacturing methods Kuldeep Agarwal , Suresh K Kuchipudi, Benoit Girard and Matthew House 2018 DOI: http://dx.doi.org/10.1177/0021998318762297
  • Effects of Load and Speed on Wear Rate of Abrasive Wear for 2014 Al Alloy To cite this article: D. Odabas 2018 IOP Conf. Ser.: Mater. Sci. Eng. 295 01 2008 DOI: http://doi.org/10.1088/1757- 899X/295/1/012008
  • Tribological behaviour of 17-4 PH stainless steel fabricated by 2 traditional manufacturing and laser-based additive manufacturing 3 methods 4 Sanjeev KCa , P.D. Nezhadfara,b, C. Phillipsa , M. S. Kennedyc , N. Shamsaeia,b, R. L. Jacksona* 2019 DOI: http://dx.doi.org/10.1016/j.wear.2019.203100
  • A Review of Wear in Additive Manufacturing: Wear Mechanism, Materials, and Process Xiangjun Jiang , Juntao Lu , Na Zhao , Zhen Chen and Zhiming Zhao 2024 DOI: https://doi.org/10.3390/lubricants12090321
  • Friction and wear behaviour of plasma sprayed Cr2O3-TiO2 coating Pranay Bagde, S G Sapate, R K Khatirkar, Nitesh Vashishtha and Satish Tailor 16 February 2018 • © 2018 IOP Publishing Ltd DOI: http://dx.doi.org/10.1088/2053-1591/aaacf4
  • Conventional vs 3-dimensional printed cast wear comfort J Graham, M Wang, K Frizzell, C Watkins Hand, 2020 - journals.sagepub.com DOI: https://doi.org/10.1177/1558944718795291
  • Wear resistance of 3D-printed materials: A systematic review E Prause, J Hey, F Beuer, F Schmidt - Dentistry Review, 2022 – Elsevier DOI: https://doi.org/10.1016/j.dentre.2022.100051
  • New promising ceramic coatings for corrosion and wear protection of steels: a review N Attarzadeh, M Molaei, K Babaei- Surfaces and 2021 – Elsevier DOI: https://doi.org/10.1016/j.surfin.2021.100997
  • Characterization of coarse and ultrafine-grained austenitic stainless steel subjected to dynamic impact load: XRD, SEM, TEM and EBSD analyses AA Tiamiyu, AG Odeshi, JA Szpunar - Materialia, 2018 – Elsevier DOI: https://doi.org/10.1016/j.mtla.2018.09.016
  • Patel, S. K., & Soni, D. K. (2020). A Complete Review on 3d Printing and Different Process Parameters on which it's Performance Depends. In International Journal of Engineering and Advanced Technology (Vol. 9, Issue 6, pp. 364–368). DOI: https://doi.org/10.35940/ijeat.f1366.089620
  • Mohd Zulfaezal Che Azemin, Mohd Afiq Ariffin Azman, Muhammad Hafizuddin Bahrain, Mohd Izzuddin Mohd Tamrin, 3D-Printed Model Enhances Learning Experience in Optometric Education. (2019). In International Journal of Innovative Technology and Exploring Engineering (Vol. 8, Issue 9S3, pp. 1355–1359). DOI: https://doi.org/10.35940/ijitee.i3291.0789s319
  • Katiyar, P. C., Singh, B. P., Chhabra, M., & Parle, D. (2022). Effect of Build Orientation on Load Capacity of 3D Printed Parts. In International Journal of Recent Technology and Engineering (IJRTE) (Vol. 10, Issue 6, pp. 38–52). DOI: https://doi.org/10.35940/ijrte.f6821.0310622