Published March 11, 2025 | Version 1.0
Dataset Embargoed

BETA-FOR_SPZ_Deadwood_Inventory_2014/2024

  • 1. ROR icon University of Würzburg
  • 2. ROR icon Technical University of Munich

Contributors

Data curator:

  • 1. EDMO icon University of Göttingen
  • 2. ROR icon Nordwestdeutsche Forstliche Versuchsanstalt
  • 3. Julius-Maximilians-Universität Würzburg Biozentrum
  • 4. ROR icon University of Würzburg

Description

This dataset contains per patch information of deadwood. The deadwood volume was assessed by measuring in the forest experimentally created dead trees (highstumps, logs, stumps, habitat trees, crowns) and trees that had died naturally (snags). For snags and highstumps the measured diameter is the diameter in brest height, for stumps it is the diameter of the cut surface and for crowns and logs it is the mean diameter. For standing deadwood, a taper of 1 mm per decimeter was assumed. The volume of crowns, logs, cracked snags and highstumps was calculated using the formula: mean diameter²/4 x pi x length. For stumps the formula: diameter²/4 x pi x 10cm was used. The volume of snags and habitat trees was taken from the “Krenn´sche Tarife“. Deadwood with a diameter of less than 7 cm was excluded from the recording, and the volume of snags and logs was disregarded once their diameter reached 7 cm or less. The column cwd_vol (coarse woody debris) shows the sum of all deadwood types.

Notes (English)

Variables Description
################

*index: continuous numerical count of samples , starting with 0

*patchLabel_BETAFOR: unique BETA-FOR patch label

*dwc:eventType: the nature of the dwc:event, in this case taking a sample

*dwc:samplingProtocol: The way the samples were taken, either Inventory or "roughly measured"

*tree_id: numbers as unique IDs for the deadwood on the patch

*tree_x_coordinate: x-coordinate of the deadwood

*tree_y_coordinate: y-coordinate of the deadwood

*tree_z_coordinate: z-coordinate of the deadwood

*scientificName: scientific Name of the tree species in binary nomenclature

*identification_unsure: 1 if species identification is unsure, 0 if identification is sure

*basis_for_calculation:

*status: indicates the state of the sampled deadwood object, e.g. cwd_highstump_experimental, meaning that this object is a highstump of coarse woody debris that was established experimentally

*habitattree_type: indicates the habitate tree type and if it was experimentally established or not, e.g. highstump_experimental. Habitat tree types are stump, high stump, snag, log, crown

*diameter_mm: diameter of the deadwood, for snags and highstumps the measured diameter is the diameter in brest height, for stumps it is the diameter of the cut surface and for crowns and logs it is the mean diameter

*length_mm: length of the deadwood

*volume_m^3: volume of the deadwood

*comment: comments about the sample or the sampling process

*dwc:measurementDeterminedDate: date when the measurement was performed

*dwc:measurementDeterminedBy: person who performed the measurement

Files

Embargoed

The files will be made publicly available on March 11, 2028.

Additional details

Related works

Is supplemented by
Dataset: 10.5281/zenodo.14050418 (DOI)

Funding

Deutsche Forschungsgemeinschaft
BETA-FOR 459717468

Dates

Created
2024-06-21
Collected
2014/2024