Published March 17, 2018 | Version v1

A STUDY OF OPTIMIZATION OF DRILLING PROCESS PARAMETERS USING TAGUCHI METHOD

Description

The aim of this work is utilize Taguchi method to investigate the effects of drilling parameters such as spindle speed,feed rate and drill diameter on surface roughness and material removal rate in drilling of gray cast iron using solid carbide tool. The Taguchi method,a powerful tool to design optimization for quality,is used to find optimal cutting parameters. Orthogonal arrays,the signal - to - noise ratio,the analysis of variance are used to analyze the effect of drilling parameters on the quality of drilled holes. Number of experiments based on L 9 orthogonal array is conducted using CNC vertical machining centre. Statistical software Minitab18.1 is used to analyze experiment results. ANOVA is used to determine the most significant control factors af fecting the surface roughness and material removal rate. ANOVA has shown that the drill diameter has significant role to play in producing higher material removal rate and lower surface roughness. The optimum levels of various parameters obtained in presen t work for MRR are Spindle speed 800 rpm,feed rate 90 mm/min and Drill diameter is12.7 mm. The optimum levels of various parameters obtained in present work for SR are,Spindle speed 1000 rpm,feed rate 70 mm/min and Drill diameter is 10 mm.

https://www.ijiert.org/paper-details?paper_id=141205

Files

1523972767_NITET-18.pdf

Files (509.7 kB)

Name Size
md5:d381e27e156176879f781d986b78c7bc
509.7 kB Preview Download