Published February 4, 2025 | Version v1

Impact of Fluoxetine Exposure on Lymnaea stagnalis and Its Developing Eggs: Integrating Untargeted Lipidomics, Targeted Metabolomics, and Classical Risk Assessment

  • 1. Vrije Universiteit Amsterdam

Description

for .xlsx

 

1. T5_lipid_ID

This dataset contains three sheets corresponding to different biological matrices of Lymnaea stagnalis:

• CNS → Central nervous system.

• AlbG → Albumen gland.

• Eggs → Eggs.

The data correspond to lipid feature ID (alignment_4_NOREVA) and the full lipid feature name (Metabolite name).

 

2. T5_CNS_L_NEG_data

3. T5_CNS_L_POS_data

4. T5_AlbG_L_NEG_data

5. T5_AlbG_L_POS_data

6. T5_Eggs_L_NEG_data

7. T5_Eggs_L_POS_data

Tables 2–7 contain raw lipidomics data, including all steps conducted for data handling, structured across multiple sheets.

The initial data processing was performed separately for lipid features detected in positive and negative ionization modes.

Table of contents (English)

for .csv

These .csv files were used for data analysis in R and MetaboAnalyst (for lipidomics). Below is a detailed description of each dataset and its columns.

1. T5_eggsT1.csv

This dataset contains data obtained from the exposure of synchronized eggs to fluoxetine to generate a dose-response curve.

Column Descriptions:

• Scan_name → Unique identifier for each scan, used for matching with replicates.

• Scan_Number → Corresponding scan number for data matching.

• Day → All eggs were sampled after 10 days of exposure.

• Treatment → Fluoxetine treatment in nominal concentrations (µg fluoxetine L⁻¹).

• Replicate → Replicate number.

• Total_eggs → Total number of eggs counted.

• Developed_10_d → Total number of eggs that reached the developed stage after 10 days.

• Developed_perct → Percentage of developed eggs.

• Postmetamorphic_7_d → Total number of eggs that reached the postmetamorphic stage.

• Veliger_3-6_d → Total number of eggs that reached the veliger stage.

• Not_developed → Total number of non-developed eggs.

• Nd_v → Sum of veliger-stage and non-developed eggs.

 

2. T5_Fecundity.csv

This dataset includes data on the number of eggs laid by individual snails during exposure.

Column Descriptions:

• Snail_ID → Unique identifier for each snail (replicate per treatment).

• Day → Days when egg masses were collected (Days 3, 5, and 7). Empty cells indicate no eggs laid.

• Treatment (ng/mL) → Fluoxetine treatment in nominal concentrations (µg fluoxetine L⁻¹).

• Total_eggs → Total number of eggs laid by each snail.

 

3. T5_Hatching_Rate_noC11.csv

Dataset for hatching rate analysis of eggs from fluoxetine-exposed and non-exposed snails.

Column Descriptions:

• Scan_name → ID used in ImageJ analysis.

• Scan_Number → Matching ID for ImageJ.

• Day_adult_exposure → Duration of adult exposure (in days).

• Snail_ID → Unique identifier for adult snails (replicates).

• Treatment_Egg → Treatment in which eggs were incubated for 10 days.

• Snail_Treatment → Exposure conditions of adult snails.

• Treatment_Egg2 → Categorized egg incubation treatments: Control, Spiked Water, and Water.

• Total_eggs → Total number of eggs analyzed using ImageJ.

• Developed_10_d → Total number of eggs that developed within 10 days.

• Developed_10_d_% → Percentage of developed eggs.

• Postmetamorphic_7_d → Number of eggs reaching the postmetamorphic stage.

• Veliger_3-6_d → Number of eggs reaching the veliger stage.

• Not_developed → Total number of non-developed eggs.

• Veliger_Not_developed → Sum of veliger-stage and non-developed eggs.

 

4. T5_NT_AlbG_Res_LOD_filtered.csv

Dataset containing neurotransmitter and amino acid concentrations in the albumen gland of L. stagnalis.

Column Descriptions:

• ID → Sample identifier.

• Replicate → Replicate number.

• Treatment → Fluoxetine treatment, as described in the manuscript.

• Neurotransmitter → Name of detected neurotransmitters and amino acids.

• ng → Measured concentration of the metabolite (ng).

• S/N-PP → Signal-to-noise ratio.

• Protein_conc → Protein concentration in each sample (mg), used for data normalization.

• ng_prot → Metabolite concentration normalized to protein content (ng metabolite mg⁻¹ protein).

 

5. T5_NT_CNS_Res_LOD_filtered.csv

Dataset containing neurotransmitter and amino acid concentrations in the central nervous system (CNS) of L. stagnalis.

Column Descriptions:

• ID → Sample identifier.

• Replicate → Replicate number.

• Treatment → Fluoxetine treatment, as described in the manuscript.

• Neurotransmitter → Name of detected neurotransmitters and amino acids.

• ng → Measured concentration of the metabolite (ng).

• S/N-PP → Signal-to-noise ratio.

• Protein_conc → Protein concentration in each sample (mg), used for data normalization.

• ng_prot → Metabolite concentration normalized to protein content (ng metabolite mg⁻¹ protein).

 

6. T5_NT_Eggs_Res_LOD_filtered.csv

Dataset containing neurotransmitter and amino acid concentrations in L. stagnalis eggs.

Column Descriptions:

• ID → Sample identifier.

• Replicate → Replicate number.

• Treatment → Fluoxetine treatment, as described in the manuscript.

• Neurotransmitter → Name of detected neurotransmitters and amino acids (pooled sample from 10 eggs).

• ng → Measured concentration of the metabolite (ng).

• S/N-PP → Signal-to-noise ratio.

• Protein_conc → Protein concentration in each sample (mg), used for data normalization.

• ng_prot → Metabolite concentration normalized to protein content (ng metabolite mg⁻¹ protein).

 

7. CNS_L_Norm_Data

8. AlbG_L_Norm_Data

9. Eggs_L_Norm_Data

These datasets contain lipid feature data after transformation and normalization using NOREVA.

Column Descriptions:

• Sample ID → Unique identifier for each replicate.

• Label → Exposure levels and control groups (water and ethanol).

• Full lipid names → Listed in the first column.

----------------------------

Important Notes:

• Fluoxetine concentrations in the tables are nominal. The actual measured concentrations are reported in the manuscript.

• Further details on data processing and analysis can be found in the manuscript and supplementary materials.

 

Methods (English)

for .R

 

This R script, titled Ilyaskina_R_script_data_analysis.R, contains the code used for the statistical and visual data analysis presented in the manuscript titled “Impact of Fluoxetine Exposure on Lymnaea stagnalis and Its Developing Eggs: Integrating Untargeted Lipidomics, Targeted Metabolomics, and Classical Risk Assessment.”

 

All tests are labeled as chapters with the name (follow the original manuscript to see which analysis decribe in what chapter). All the commnents regarding the .cvs files are listed in separate description window.

Methods

The updated R script for Combined GLM analysis for eggs tests where: (1) eggs laid by the exposed snails and incubated in the same spiked water as their mother (exposure), and (2) eggs laid by exposed snails and incubated in clean water (recovery). 

This R script works with the same dataset as uploaded "Ilyaskina_R_script_data_analysis.R", where this analysis can be pasted and run all together.

R script: 

data <- read.csv('T5_Hatching_Rate_noC11.csv')
str(data)
data[is.na(data)] <- 0

# combined GLM analysis for exposed eggs and recovery test 
#Load required libraries
library(multcomp)  # For post hoc tests
library(ggplot2)   # For visualization
library(emmeans)

# New factor for combined treatment
data$Combined_Treatment <- ifelse(data$Treatment_Egg2 == "Control", "Control",
                                  ifelse(data$Treatment_Egg2 == "Water", "Recovery",
                                         ifelse(data$Treatment_Egg2 == "Spiked", "Exposed", NA)))

# Calculate hatching rate
data$hatching_rate <- data$Developed_10_d / data$Total_eggs

# Calculate the rate of postmetamorphic embryos
data$hatching_rate_7d <- data$Postmetamorphic_7_d / data$Total_eggs

# Calculate hatching_rate_6_0d
data$hatching_rate_6_0d <- data$Veliger_Not_developted / data$Total_eggs

# View the first few rows of the data to confirm the column
head(data)

# Replace NA or infinite values with 0
data$hatching_rate[is.na(data$hatching_rate) | is.infinite(data$hatching_rate)] <- 0
data$hatching_rate_7d[is.na(data$hatching_rate_7d) | is.infinite(data$hatching_rate_7d)] <- 0
data$hatching_rate_6_0d[is.na(data$hatching_rate_6_0d) | is.infinite(data$hatching_rate_6_0d)] <- 0


# Ensure Combined_Treatment is correctly factored
data$Combined_Treatment <- factor(data$Combined_Treatment, 
                                  levels = c("Control", "Recovery", "Exposed"))

# Add a factor for stimulus treatment if not already present
data$Stimulus_Treatment <- paste(data$Combined_Treatment, data$Snail_Treatment, sep = "_")

# Convert Snail_Treatment to a factor
data$Snail_Treatment <- factor(data$Snail_Treatment)
# Reorder Snail_Treatment levels to make "Water" the first level
data$Snail_Treatment <- factor(data$Snail_Treatment, 
                               levels = c("Water", "EtOH", "30", "100", "300"))

# Confirm the new order
levels(data$Snail_Treatment)

# Check the structure of the data
str(data)

# GLM using success/failure counts for developed eggs (10 days)
# Fit the combined GLM
combined_glm <- glm(cbind(Developed_10_d, Total_eggs - Developed_10_d) ~ 
                      Combined_Treatment * Snail_Treatment, 
                    family = binomial, 
                    data = data)

# Summary of the model
summary(combined_glm)

# ANOVA for significance testing
anova(combined_glm, test = "Chisq")

library(emmeans)

# Pairwise comparisons for Combined_Treatment
post_hoc_combined <- emmeans(combined_glm, pairwise ~ Combined_Treatment | Snail_Treatment)

# View results
post_hoc_combined

# GLM using success/failure counts for hatching_rate_7d
glm_model_7d <- glm(cbind(Postmetamorphic_7_d, Total_eggs - Postmetamorphic_7_d) ~ 
                      Combined_Treatment * Snail_Treatment, 
                    family = binomial(link = "logit"), 
                    data = data)

# ANOVA for significance testing
anova(glm_model, test = "Chisq")

# Summary of the model
summary(glm_model_7d)


# GLM using success/failure counts for hatching_rate_6_0d
glm_model_6_0d <- glm(cbind(Veliger_Not_developted, Total_eggs - Veliger_Not_developted) ~ 
                        Combined_Treatment * Snail_Treatment, 
                      family = binomial(link = "logit"), 
                      data = data)

# Summary of the model
summary(glm_model_6_0d)
# Analysis of Deviance (ANOVA)
anova(model, test = "Chisq")

# GLM using success/failure counts for postmetamorphic embryos (7 days)
# Fit the combined GLM
postmetamorphic_glm <- glm(cbind(Postmetamorphic_7_d, Total_eggs - Postmetamorphic_7_d) ~ 
                             Combined_Treatment * Snail_Treatment, 
                           family = binomial, 
                           data = data)

# Summary of the model
summary(postmetamorphic_glm)

# ANOVA for significance testing
anova(postmetamorphic_glm, test = "Chisq")

# Pairwise comparisons for Combined_Treatment
post_hoc_postmetamorphic <- emmeans(postmetamorphic_glm, pairwise ~ Combined_Treatment | Snail_Treatment)

# View results
post_hoc_postmetamorphic

# GLM using success/failure counts for veliger + non-developed embryos
# Fit the combined GLM
veliger_glm <- glm(cbind(Veliger_Not_developted, Total_eggs - Veliger_Not_developted) ~ 
                     Combined_Treatment * Snail_Treatment, 
                   family = binomial, 
                   data = data)

# Summary of the model
summary(veliger_glm)

# ANOVA for significance testing
anova(veliger_glm, test = "Chisq")

# Pairwise comparisons for Combined_Treatment
post_hoc_veliger <- emmeans(veliger_glm, pairwise ~ Combined_Treatment | Snail_Treatment)

# View results
post_hoc_veliger

Files

AlbG_L_Norm_Data.csv

Files (33.3 MB)

Name Size
md5:867087b8cc0d5578a2376eb05dca7db7
520.8 kB Preview Download
md5:cc84fb214acbc62f75d6651594d38653
240.5 kB Preview Download
md5:e3f4ae87d54924c7458cca8e3fb038b8
208.7 kB Preview Download
md5:4c047b3ca86d55d8090ebc5c95383fb5
27.8 kB Download
md5:2b3db47fd67621d47b08f5787a82b1b8
4.1 MB Download
md5:cdfed38a3969bfba77c45fa602cd82b9
13.0 MB Download
md5:7b4c4943c69f1b2d1cb4d16eb07fa6ab
1.3 MB Download
md5:ac1b48bf587c717d65aa8749259c7424
7.1 MB Download
md5:c09bb18cbaeb2dfa434ccafa6e940b53
1.0 MB Download
md5:b16a95c18e5085e1183bbd6ac81098c6
5.5 MB Download
md5:974956b6bbeb9ac0753232b931d29128
2.5 kB Preview Download
md5:0db44b76830a76a9e2ab568010972e62
2.9 kB Preview Download
md5:9d1be82b372705e0e238e8389f029425
9.7 kB Preview Download
md5:8e7c54a81bebdf3dad5636da270fe6e2
62.6 kB Download
md5:dfca2f1fa3d6555f6210af75d364588b
48.6 kB Preview Download
md5:8c3f2481e29220ee13be11d50660e95f
6.1 kB Preview Download
md5:8bbb1ceff15ad9833e87f82b1bc3e048
33.0 kB Preview Download
md5:42b48b35712fa1d68752cd9c2f3b38d2
5.2 kB Preview Download
md5:5cc779170ec983b5eb6fcd2d50e65d7d
26.1 kB Preview Download
md5:533558522d8fa183db9b466c44fefdb7
4.5 kB Preview Download