World Academy of Science, Engineering and Technology
Published November 25, 2012 | Version 13279
Journal article Open

Influence of UV Treatment on the Electrooptical Properties of Indium Tin Oxide Films Used in Flexible Displays

Description

Indium-tin oxide films are deposited by low plasma temperature RF sputtering on highly flexible modification of glycol polyethyleneterephtalate substrates. The produced layers are characterized with transparency over 82 % and sheet resistance of 86.9 Ω/square. The film's conductivity was further improved by additional UV illumination from light source (365 nm), having power of 250 W. The influence of the UV exposure dose on the structural and electro-optical properties of ITO was investigated. It was established that the optimum time of illumination is 10 minutes and further UV treatment leads to polymer substrates degradation. Structural and bonds type analysis show that at longer treatment carbon atoms release and diffuse into ITO films, which worsen their electrical behavior. For the optimum UV dose the minimum sheet resistance was measured to be 19.2 Ω/square, and the maximum transparency remained almost unchanged – above 82 %.

Files

13279.pdf

Files (203.7 kB)

Name Size
md5:de151d5dc404781c97f65522e98c9515
203.7 kB Preview Download

Additional details

References

  • S. Lin, S. Hwang, and R. J. Koubek, "Minimum ambient illumination requirement for legible electronic-paper display", Displays, vol. 32, pp. 8-16, 2011.
  • F. C. Krebs, "Fabrication and processing of polymer solar cells: A review of printing and coating techniques", Sol. Energ. Mat. Sol. Cells, vol. 93, pp. 394-412, 2009.
  • A. Abdellah, B. Fabel, P. Lugli, and G. Scarpa, "Spray deposition of organic semiconducting thin-films: Towards the fabrication of arbitrary shaped organic electronic devices", Org. Electr., vol. 11, pp. 1031-1038,2010.
  • P. Chang, C. Wu, and H. Leu, "Investigation of technological trends in flexible display fabrication through patent analysis", Displays, vol. 33, pp. 68-73, 2012.
  • W. Kuo, P. Lin, and Sh. Hwang, "A framework of perceptual quality assessment on LCD-TV", Displays, vol.8, pp. 35-43, 2007.
  • B. Ren, X. Liu, M. Wang, and Y. Xu, "Preparation and characteristics of indium tin oxide (ITO) thin films at low temperature by r.f. magnetron sputtering", Rare Metals, vol. 25, pp. 137-140, 2006.
  • Ch. S. Moon, and J. G. Han, "Low temperature synthesis of ITO thin film on polymer in Ar/H2 plasma by pulsed DC magnetron sputtering", Thin Solid Films, vol. 516, pp. 6560-6564, 2008.
  • T.P. Muneshwar, V. Varma, N. Meshram, S. Soni, and R.O. Dusane, "Development of low temperature RF magnetron sputtered ITO films on flexible substrate", Solar Energy Materials and Solar Cells, vol. 94, pp. 1448-1450, 2010.
  • Zh. Yang, Sh. Han, T. Yang, L. Ye, H. Ma, and Ch. Cheng, "ITO films deposited on water-cooled flexible substrate by bias RF Magnetron Sputtering", Applied Surface Science, vol. 161, pp. 279-285, 2000. [10] M. P. Aleksandrova, G. H. Dobrikov, and M. M. Rassovska, "Impedance Investigation of Polymer Layers for Electroluminescent Devices", International Journal of Polymeric Materials, vol. 61, pp. 1-7, 2012. [11] Tz. Babeva, S. Kitova, and I. Konstantinov, "Photometric methods of determination of the optical constants and the thickness of thin absorbing films: Criteria for precise and unambiguous determination of n, k and d in a wide spectral range", Appl. Opt., vol. 40, pp. 2682-2686, 2001. [12] S. Tabakov, V. Yakimov, and V. Videkov "Modernization of Spectrophotometric Measurements", 19-th ISS on Semiconductor and Hybrid Technologies - Sofia, Bulgaria, vol.19, pp. 24-27, 1998. [13] M. Aleksandrova, N. Nikolov, and I. Pandiev, "Thermo-stimulation of charges by Peltier element for trap analysis in polymer layers", International Journal of Polymer Anal. Charact., vol. 16, pp. 221-227, 2011. [14] A.K. Kulkarnia, K. H. Schulz, T.S. Lim, and M. Khan. "Dependence of the sheet resistance of indium-tin-oxide thin films on grain size and grain orientation determined from X-ray diffraction techniques", Thin Solid Films, vol. 345, pp. 273-277, 1999. [15] M.K.M. Ali, K. Ibrahim, O. S Hamad, M.H. Eisa, M.G. Faraj, and F. Azhari, "Deposited indium tin oxide (ITO) thin films by DC-magnetron sputtering on polyethylene terephthalate substrate (PET), Rom. Journ. Phys., vol. 56, pp. 730-741, 2011.