World Academy of Science, Engineering and Technology
Published October 24, 2010 | Version 11856
Journal article Open

Determination of Geometric Dimensions of a Double Sided Linear Switched Reluctance Motor

Authors/Creators

Description

In this study, a double-sided linear switched reluctance motor (LSRM) drive was investigated as an alternative actuator for vertical linear transportation applications such as a linear elevator door, hospital and subway doors which move linearly and where accurate position control and rapid response is requested. A prototype sliding elevator door that is focused on a home elevator with LSRMs is designed. The motor has 6/4 poles, 3 phases, 8A, 24V, 250 W and 250 N pull forces. Air gap between rotor and translator poles of the designed motor and phase coil-s ideal inductance profile are obtained in compliance with the geometric dimensions. Operation and switching sections as motor and generator has been determined from the inductance profile.

Files

11856.pdf

Files (406.6 kB)

Name Size
md5:988669ca8c72a15c27de9fc29b7aef01
406.6 kB Preview Download

Additional details

References

  • Budig, P.-K., "The application of linear motors," in Proc. 3rd IEEE Int. Power Electron. and Motion Control Conf., Aug. 2000, vol. 3,pp. 1336-1341.
  • Lim H.S, Krishnan R., "Ropeless Elevator With Linear Switched Reluctance Motor Drive Actuation Systems", IEEE Transactions On Industrial Electronics, 54, No. 4, 2209-2218 August, 2007.
  • Pasanen J, Jahkonen P, Ovaska Sj, "An integrated digital motion control unit", IEEE Transactions On Instrumentation And Measurement, 40, No 3, 654-657, 1991.
  • J. D. Edwards, O., G├╝rdal, "Contactless measurement of the secondary position in linear reluctance motors", IEE Proceedings, Electric Power Applications, 142, 6, 355-360, 1995.
  • Masuda T, Yoshikawa M., Tawada M., "Formulation of elevator door equation of motion", JSME International Journal Series CDynamics Control Robotics Design and Manufacturing, 39, 2, 279- 285, 1996.
  • Bae HK, Lee BS, Vijayraghavan P, "A linear switched reluctance motor: Converter and control", IEEE Transactions on Industry Applications, 36, 5 1351-1359, 2000.
  • Krishnan R., "Propulsion with and without wheels", IEEE International Conference on Industrial Technology (ICIT), 1, 2, 11- 19, 2005.
  • Daldaban F, ├£stkoyuncu N "Analysis of a new double-sided linear switch reluctance motor"Erciyes University Journal of Science, 22 ( 1-2), 50-56, 2006
  • Liu X, Ye YY, Zheng Z.,"A novel tubular permanent magnet linear synchronous motor used for elevator door", Conference Information: International Conference on Electrical Machines and Systems, Cilt1, No 4, 1277-1280, 2007. [10] Jia YH, Wu HX, Kou BQ., "Research on Position Sensor Magnetic Encoder Based on the Elevator Door Machine Servo System", Conference Information: 3rd International Conference on Sensing Technology, 431-434, 2008. [11] Liu X, Ye YY, Zheng Z., "Magnetic field and performance analysis of a tubular permanent magnet linear synchronous motor applied in elevator door system", Journal Of Zhej─▒ang University-Science A., 9, 4, 572-576, 2008. [12] Fenercioglu A., Dursun M., "Design and magnetic analysis of a double sided linear switched reluctance motor" source: Przeglad Elektrotechniczny, 86 5, 78-82, 2010. [13] Dursun M ,├ûzbay H ,Ko├º F "An elevator driver with linear motor"(in Turkish) Elevator Smposium,21-23 May,Izmir, Turkey, 2010. [14] Dursun M., Sayg─▒n A., "A switch reluctance motor driver with boost converter designed for a photovoltaic array irrigation system" Erciyes University Journal of Science,22,(1-2) 57-65,2006 [15] Arreola, R.B. 2003. "Nonlinear control design for a magnetic levitation system". M.Sc. Thesis, University of Toronto, Canada. [16] Gan,W.C. and Cheung, N.C. 2001. "Design of a Linear Switched Reluctance Motor for High Precision Applications," IEEE International, Electric Machines and Drives Conference, June 2001. [17] Gieras, J.F. and Piech Z.J. 2000. "Linear synchronous motors: transportation and automation Systems". U.S.A. CRC Press LLC. [18] Kaw Krishnan, R. 2001. "Switched reluctance motor drives: modelling, Simulation, as Analysis, Design, and Applications", U.S.A. CRC, Press LLC. [19] Lee, B.S., Bae, H.K., Vijayraghavan, P. and Krishnan, R. 1999. "Design of a Linear switched reluctance machine", Conference of IEEE, Industry Appl. J Soc. (IAS -99), 1, 547-554. [20] Miller, T.J.E. 1993. "Switched reluctance motors and their control". Magna Physics Publishing and Clarendon Press, Oxford, UK. [21] Miller, T.J.E. 2002. "Optimal design of switched reluctance motors".IEEE Transactions on Industrial Electronics, 49, 1 (February): 15-26. [22] R. Randun, A.V., 1995. "Design Considerations for the Switched Reluctance Motor". IEEE Transactions on Industry Applications, 31,1049-1087 [23] Thet M. M., 2008 "Design and Calculation of 75 W Three-phase Linear Switch Reluctance Motor" World Academy of Science, Engineering and Technology 48,108-113.