Published November 14, 2023 | Version v1

Engineering properties of Seawater-mixed LWAC

  • 1. ROR icon West Pomeranian University of Technology

Description

The following files consists of data from the original article "Seawater-Mixed Lightweight Aggregate Concretes with Dune Sand, Waste Glass and Nanosilica: Experimental and Life Cycle Analysis" published in International Journal of Concrete Structures and Materials. The files are sequenced in the order of appearance of data from the article.  
The worksheets in the uploaded file consists of data from the tests consistency, oven-dry density, thermal conductivity, open porosity, water absorption coefficient, and strength (2, 7, and 28 days) conducted on seawater-mixed light weight concretes. Also, the particle size distribution data of the raw materials used in this study is also included.  The values are presented with units mentioned in appropriate locations. 

Sheet 1: Particle size distribution of raw materials

Sheet 2: Slump flow data (Fresh state)

Sheet 3: Compressive strength data (@ 2, 7, and 28 days)

Sheet 4: Oven dry density data (@ 28 days)

Sheet 5: Open porosity data (@ 28 days)

Sheet 6: Thermal conductivity data (@ 28 days)

Sheet 7: Water absorption coefficient data (@ 28 days)

Link to access the published article at the source: https://link.springer.com/article/10.1186/s40069-023-00613-4

Specimen ID description: 

QTW0 - CEM III with quartz sand (Tap water mixing)

QTW3 - CEM III + 3% nano-Silica with quartz sand (Tap water mixing)

QSW0 - CEM III with quart sand (Seawater mixing)

QSW3 - CEM III + 3% nano-Silica with quartz sand (Seawater mixing)

GTW0 - CEM III with crushed glass aggregate (Tap water mixing)

GTW3 - CEM III + 3% nano-Silica with crushed glass aggregate (Tap water mixing)

GSW0 - CEM III with crushed glass aggregate (Seawater mixing)

GSW3 - CEM III + 3% nano-Silica with crushed glass aggregate (Seawater mixing)

DTW0 - CEM III with dune sand (Tap water mixing)

DTW3 - CEM III + 3% nano-Silica with dune sand (Tap water mixing)

DSW0 - CEM III with dune sand (Seawater mixing)

DSW3 - CEM III + 3% nano-Silica with dune sand (Seawater mixing)

 

PS - The attached file could be opened only with ORIGIN 2021b or any other compatible versions of the same software

Notes

This research is part of project No. 2021/43/P/ST8/00945, co-funded by the National Science Centre Poland and the European Union Framework Programme for Research and Innovation Horizon 2020 under the Marie Skłodowska-Curie grant agreement No. 945339.

Files

Files (165.0 kB)

Name Size Download all
md5:26c40bfb51bc074b593e9ceeb5af8871
165.0 kB Download