Published May 25, 2019 | Version v1

IODP Expedition 369 Moisture and Density

Description

Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.

Files

data_by_hole.zip

Files (22.8 MB)

Name Size Download all
md5:d9bdaa5a6d0d831884e1feca616a6fcf
1.5 kB Download
md5:b4e033a0aec179f8098de99b5302b4d1
54.1 kB Preview Download
md5:c458748fcbb99c3c5302f374bf193514
31.0 kB Preview Download
md5:ae309c21d3bd40e11a9c6337bb6faf18
69.2 kB Preview Download
md5:85d3298dc9ae4f928894efeda91de444
7.4 kB Preview Download
md5:2875f7509f361e1dfa03678b5466b257
4.6 kB Preview Download
md5:0666aeb6b08176a6fd74032854d82abc
94.0 kB Preview Download
md5:097d8b69f83c814d6bf5b3ea36ce1269
81.1 kB Preview Download
md5:f69eff793e114e36588341d0d7e37805
22.4 MB Preview Download

Additional details

Related works

Is documented by
10.14379/iodp.proc.369.2019 (DOI)