Published August 24, 2022 | Version v1

Temperature-dependent Lamb wave signals in highly anisotropic CFRP

Authors/Creators

  • 1. Institute of Fluid Flow Machinery, Polish Academy of Sciences

Description

The dataset contains signals of propagating Lamb waves in highly anisotropic carbon fibre reinforced polymer (CFRP). The reinforcement is unidirectional along 0 deg. A detailed description of the material and its parameters is given in [1]. The arrangement of piezoelectric actuator A and sensors S1-S7 is shown in figure "plate_angular_pzt_arrangement_50x50.png". Sensors are placed at propagation angles from 0 deg to 90 deg with a step of 15 deg. It should be noted that two piezoelectric transducers bonded to both sides of the plate were used as the actuator. It allowed for exciting Lamb waves with dominant A0 and S0 modes, respectively. Hence, there are two respective zip files with data.

The following parameters were used during measurements:

  • Temperatures: T=[50,40,30,20,10,0,-10,-20,-30,-40,-50];
  • Number of cycles in Hann windowed signals: no_of_cycles=[2,2.5,3];
  • Carrier frequencies of excitation signals [kHz]: frequencies=[20:10:250];
  • Number of averages: 50;
  • Sampling frequency: 10 MHz.

The following equipment was used in the experiment:

  • Environmental chamber by Angelantoni Test Technologies, model MyDiscovery 600 C;
  • National Instruments waveform generator PXIe-5413;
  • Krohn-Hite voltage amplifier model 7500;
  • Cedrat Technologies LWDS amplifier (used as a charge amplifier);
  • National Instruments oscilloscope PXIe-5105.

Files in CSV format contain environmental chamber data (temperature programme, actual temperature and humidity over time, etc.). This can be read and plotted in Matlab by running the script “Read_plot_environmental_chamber.m”. There is another file “Read_plot_environmental_chamber_plus_DS18B20_RH20_KROHN_A0.m” in which temperature was registered also by DS18B20 digital sensor. It loops over all measurements so that it can be used also for reading signals from “niscope_avg_waveform.mat” in respective subfolders. In particular, sensor signals are stored in the “niscope_avg_waveform” variable, a matrix of dimensions 8192x7.

Files

environmental_chamber_KROHN_A0.zip

Files (540.0 MB)

Name Size
md5:349fdfd854c6ed0ad427aec90ce64e51
278.7 MB Preview Download
md5:b9dd9f3921e2d0e85e88b69d87250ee4
261.1 MB Preview Download
md5:3717531d827c6be1053c466be914c851
169.8 kB Preview Download
md5:eb5d39bb7587851635c47304f9277a1b
2.8 kB Preview Download

Additional details

References

  • [1] P. Kudela, M. Radzieński, P. Fiborek, T. Wandowski, Elastic constants identification of fibre-reinforced composites by using guided wave dispersion curves and genetic algorithm for improved simulations, Composite Structures, 272, 2021, 114178