Hydrographic and velocity data during Leg 1 of the R/V Hespérides MOC2 cruise, 7-18 April 2010, western equatorial Atlantic
Authors/Creators
-
Josep Lluis Pelegrí Llopart1
-
Ignasi Vallès Casanova1
- Veronica Maria Benítez Barrios2
-
Paola Castellanos3
-
Mariona Claret4
- Patricia de la Fuente5
-
Mikhail Emelianov1
-
Eugenio Fraile Nuez6
- Marc Gasser1
-
Pedro Llanillo7
-
Evan Mason8
-
Maria Pastor9
-
Jesús Peña Izquierdo10
- Rocio Rodríguez1
-
Angle Rodríguez Santana6
-
Miquel Rosell FIeschi11
-
Joaquin Salvador1
-
Marco Talone1
- 1. ICM-CSIC
- 2. Oceomic
- 3. University of Lisbon
- 4. University of Washington
- 5. Universidad de Burgos
- 6. IEO-CSIC
- 7. Alfred Wegener Institute
- 8. IMEDEA
- 9. McGill University
- 10. Lobelia Earth
- 11. Escola Montagut
Description
This dataset consists of 47 CTD and LADCPs casts from the sea surface down to 5000 m. These hydrographic casts were done during the first leg of the MOC2-Equatorial oceanographic cruise, which took place in the western equatorial Atlantic (5°S-5°N; 46°W-30°W] between 7 and 18 April 2010, onboard the R/V Hespérides. Temperature and conductivity were obtained with a SeaBird 911-Plus multi-probe system mounted on a 24 Niskin-bottle rosette that collected water samples at standard depths, which were used to calibrate the conductivity data. Duplicate temperature and conductivity sensors were used as a quality control measure. The LADCPs were RDI 300 kHz Workhorse Monitor instruments used in synchronized master-slave mode. The system was set to a ping-rate of 1 ping/s and a bin length of 10 m, and the data was processed using the IFM-GEOMAR LADCP software, Version 10.8. The LADCPs velocity data were de-tided using the TPXO.3 global model of ocean tides. The netcdf file MOC2_leg1.nc contains data interpolated linearly every 1 m from surface to 1500 m depth.