Software Restricted Access

Validated LISFLOOD-FP model for coastal areas, Deliverable 5.2 – ECFAS Project (GA 101004211), www.ecfas.eu

Le Gal, M.; Ciavola, P.; Gastal, V.; Fernandez-Montblanc,T.; Delbour, S.

The European Copernicus Coastal Flood Awareness System (ECFAS) project will contribute to the evolution of the Copernicus Emergency Management Service (https://emergency.copernicus.eu/) by demonstrating the technical and operational feasibility of a European Coastal Flood Awareness System. Specifically, ECFAS will provide a much-needed solution to bolster coastal resilience to climate risk and reduce population and infrastructure exposure by monitoring and supporting disaster preparedness, two factors that are fundamental to damage prevention and recovery if a storm hits. 

The ECFAS Proof-of-Concept development will run from January 2021-December 2022. The ECFAS project is a collaboration between Scuola Universitaria Superiore IUSS di Pavia (Italy, ECFAS Coordinator), Mercator Ocean International (France), Planetek Hellas (Greece), Collecte Localisation Satellites (France), Consorzio Futuro in Ricerca (Italy), Universitat Politecnica de Valencia (Spain), University of the Aegean (Greece), and EurOcean (Portugal), and is funded by the European Commission H2020 Framework Programme within the call LC-SPACE-18-EO-2020 - Copernicus evolution: research activities in support of the evolution of the Copernicus services.

This project has received funding from the European Union’s Horizon 2020 programme

The deliverables will have restricted access at least until the end of ECFAS

Description of the containing files inside the Dataset.

The deliverable is composed of a technical report and a compressed directory with Matlab routines ready for pre/post processing using the LISFLOOD-FP model. Both prodcuts were developed under Task 5.2 - Flood modelling: calibration and validation of flood model and Deliverable 5.2 - Validated LISFLOOD-FP model for coastal areas

The technical report describes the scientific method used for calibrating and validating the LISFLOOD-FP model for coastal areas at Pan-European level. It presents the results obtained through 17 test-cases and the analyses performed to identify the optimal set of parameters that will be used for the flood map catalogue of T5.4 - Modelling of coastal flood characteristics along flood-prone areas at EU level. In addition, the method implemented for extracting the observed flood extension derived from satellite images is detailed.

The scripts developed for pre-processing the external data and generating the input files for the LISFLOOD-FP model are attached to the report. Three scripts are editable and adaptable to each test case, while 8 functions formed a fixed library. In addition, the script converting the result from LISFLOOD-FP to flood map is made available.

This project has received funding from the Horizon 2020 research and innovation programme under grant agreement No. 101004211
Restricted Access

You may request access to the files in this upload, provided that you fulfil the conditions below. The decision whether to grant/deny access is solely under the responsibility of the record owner.


Only the partners of the consortium will have access to the Dataset. 


139
2
views
downloads
All versions This version
Views 139139
Downloads 22
Data volume 10.1 MB10.1 MB
Unique views 113113
Unique downloads 22

Share

Cite as