Published November 2, 2021 | Version 1.1.0
Dataset Open

Multi-Needle Langmuir probe (mNLP) data on the Investigation of Cusp Irregularities (ICI) 4 sounding rocket

Authors/Creators

  • 1. Department of Physics and Technology, University of Tromsø
  • 2. Department of Physics, University of Oslo

Description

Documentation for file: ICI4_mNLP_01112021.mat

 

  1. The mNLP system on ICI-4

The mNLP system on ICI-4 consisted of four cylindrical Langmuir probes with a diameter of 0.51 mm and a length of 25 mm [1,2]. The instruments allowed for current measurements at a sampling rate of 8680.5 Hz. The mNLP data included in the file are 1) the raw currents (‘I_mnlp’) in which spikes have been removed using a median filter over ten data points, and 2) the “filtered currents” (‘I_mnlp_filt’). For the latter, the spin of the payload and the three first harmonics were removed using a band-pass filter [1,2]. Additionally, components with frequencies larger than 1kHz were also removed.

 

 

  1. Variables:

Variable name

Units

Description/Comment

time_noNans

seconds

Time of flight since launch.

Alt

Km

Altitude of the payload.

I_mnlp

Ampere

Currents obtained by the four cylindrical Langmuir probes. The 1st-4th columns contain the currents obtained by the probes with bias voltages of 3V, 4.5V, 6V, and 7.5 V, respectively. The data was filtered using a median filter over ten data points.

I_mnlp_filt

Ampere

Same as I_mnlp with additional filtering of currents using band-pass filters [1,2].

 

Acknowledgement

The mNLP experiment and the ICI-4 campaign were funded through the Research Council of Norway. Thanks to Lasse Clausen, Espen Trondsen, Jøran I. Moen, David Michael Bang-Hauge, Bjørn Lybekk, and the Mechanical Workshop at the University of Oslo, Norway. 


 

1. Bekkeng, T. A., K. S. Jacobsen, J. K. Bekkeng, A. Pedersen, T. Lindem, J.‐P. Lebreton, and J. I. Moen (2010), Design of a multi‐needle Langmuir probe system, Meas. Sci. Technol., 21, 085,903, doi:10.1088/0957‐0233/21/8/085903

2. Jacobsen, K. S., Pedersen, A., Moen, J. I., & Bekkeng, T. A. (2010), A new Langmuir probe concept for rapid sampling of space plasma electron density. Measurement Science and Technology, 21(8), https://doi.org/10.1088/0957‐0233/21/8/085902

Notes

This work was supported by the Research Council of Norway: Grant, 275653, 230996, 208006

Files

Files (206.3 MB)

Name Size
md5:55eb5ae8165aa9a2dcc8cc0e4fbb9e33
206.3 MB Download

Additional details

References

  • Bekkeng, T. A., K. S. Jacobsen, J. K. Bekkeng, A. Pedersen, T. Lindem, J.‐P. Lebreton, and J. I. Moen (2010), Design of a multi‐needle Langmuir probe system, Meas. Sci. Technol., 21, 085,903, doi:10.1088/0957‐0233/21/8/085903
  • Jacobsen, K. S., Pedersen, A., Moen, J. I., & Bekkeng, T. A. (2010), A new Langmuir probe concept for rapid sampling of space plasma electron density. Measurement Science and Technology, 21(8), doi:10.1088/0957‐0233/21/8/085902