Published August 5, 2021 | Version 1.0
Dataset Open

Dataset on full ultrasonic guided wavefield measurements of a CFRP plate with fully bonded and partially debonded omega stringer

  • 1. Institute of Fluid Flow Machinery, Polish Academy of Sciences
  • 2. Institute of Composite Structures and Adaptative Systems, German Aerospace Center
  • 3. Bundesanstalt fur Materialforschung und -prufung (BAM)
  • 4. Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Systems for Condition Monitoring
  • 5. J.W. Goethe-University, Department of Physics

Description

The fourth dataset dedicated to the Open Guided Waves platform presented in this work aims at a carbon fiber composite plate with an additional omega stringer at constant temperature conditions. The dataset provides full ultrasonic guided wavefields. 

A chirp signal in the frequency range 20-500 kHz and Hann windowed tone-burst signal with 5 cycles and carrier frequencies of 16.5 kHz, 50 kHz, 100 kHz, 200 kHz and 300kHz are used to excite the wave. The piezoceramic actuator used for this purpose is attached to the center of the stringer side surface of the core plate.


Three scenarios are provided with this setup: (1) wavefield measurements without damage, (2) wavefield measurements with a local stringer debond and (3) wavefield measurements with a large stringer debond. The defects were caused by impacts performed from the backside of the plate. As result, the stringer feet debonds locally which was verified with conventional ultrasound measurements.

The dataset can be used for benchmarking purposes of various signal processing methods for damage imaging.

The detailed description of the dataset is published in Data in Brief Journal [3].

Files

figure1a.png

Files (18.1 GB)

Name Size Download all
md5:61cc380df5ca6d2e3973839d4b39246a
155.3 kB Preview Download
md5:e97c81b4aa8adbcbd2930a0686e42ddc
88.2 kB Preview Download
md5:12e99813bf719c8bdb672799e0523708
734 Bytes Download
md5:6d0c6d0cb2dfc9ac4daa7b1a3057ea61
6.0 GB Preview Download
md5:cb65a52c699e9eadb5a1e61f1488c330
6.0 GB Preview Download
md5:a30b5088ba4f6689595f4c7cc4698a91
6.1 GB Preview Download
md5:3ffce16947972b10fea2fc736d742a79
893 Bytes Download
md5:76915752dd9cd96f505d8bc3d2a0d405
1.8 kB Download
md5:f87cbdb5d717d2e837da62ff7ae3f595
11.3 kB Preview Download

Additional details

Funding

DEMETER – Development of E2E Maintenance architecture process and methods enabling a reliable and economic air transport system 685704
European Commission

References

  • [1] J. Moll, J. Kathol, C.-P. Fritzen, M. Moix-Bonet, M. Rennoch, M. Koerdt, A. S. Herrmann, M. G. R. Sause, M. Bach, Open Guided Waves - Online Platform for Ultrasonic Guided Wave Measurements, Structural Health Monitoring 18 (2019) 1903–1914.
  • [2] J. Moll, C. Kexel, J. Kathol, C.-P. Fritzen, M. Moix-Bonet, C. Willberg, M. Rennoch, M. Koerdt, A. Herrmann, Guided waves for damage detection in complex composite structures: The influence of omega stringer and different reference damage size, Applied Sciences 10 (2020).
  • [3] P. Kudela, M. Radzienski, M. Moix-Bonet, C. Willberg, Y. Lugovtsova, J. Bulling, K. Tschoke, J. Moll, Dataset on full ultrasonic guided wavefield measurements of a CFRP plate with fully bonded and partially debonded omega stringer, Data in Brief 42 (2022) 108078