Published June 30, 2021 | Version v1

Numerical analysis of the effect of the adhesive shear modulus on a corroded, cracked and repaired plate in mixed mode

  • 1. Department of Mechanical Engineering, University of Sidi Bel Abbes, BP 89 Cité Ben M'hidi 22000, Sidi Bel Abbes, Algeria
  • 2. Institute of science and Technologie, university of Relizane, Relizane 48000, Algeria

Description

The objective of this work concerns a numerical analysis by the three-dimensional finite element method, of the repair by simple composite patch of corroded and cracked Al 2024- T3 plates with a crack inclined to the horizontal at an angle q=30°. The effect of the adhesive shear modulus on the damaged area and on the DR damaged area ratio was considered. Then the effect of this parameter on the values of the DR and the J integral. The results obtained show the rectangular shape is the best because it makes it possible to obtain the lowest values of the J integral. In addition, it is best to use the elliptical shape after analyzing the results for the damaged area (DR) ratio.

Files

Berrahou_02_ac.pdf

Files (490.5 kB)

Name Size
md5:32df9e63b46e97e019947c45b37bc8d3
490.5 kB Preview Download