Published June 9, 2021 | Version v1

Supplementary data for "Three-dimensional and real-scale modeling of flow regimes in dense snow avalanches"

  • 1. Swiss Federal Institute of Technology, Lausanne
  • 2. WSL Institute for Snow and Avalanche Research SLF
  • 3. Computer and Information Science Department, University of Pennsylvania
  • 4. Swiss Federal Institute of Technology, Lausanne; WSL Institute for Snow and Avalanche Research SLF

Description

We are releasing the supplementary data for our manuscript accepted by Landslides.

Figure 5: Data of Fig. 5. Distribution of particle stress state at 10 s. Np and Npt are the particle number at each interval of γ and the total particle number, respectively. The interval of γ is 1.8°. a case I; b case II; c case III; d case IV. Red and blue denote distributions of elastic and plastic particles, respectively. Purple shows the overlapped part of the distributions of elastic and plastic particles

Figure 6: Data of Fig. 6. Cumulative probability of density ratio in a case I, b case II, c case III, and d case IV

Figure 9a: Data of Fig. 9a. Front velocity evolution along the flow path denoted by the gray curve, on which the black dot shows the observed stopping point of the avalanche

Figure 10a: Data of Fig. 10a. Density profile at the tip of the avalanche deposit, z is along the direction of negative gravity, and z = 0 corresponds to the bottom of the measured point

Files

Supplementary_data.zip

Files (44.7 kB)

Name Size Download all
md5:7639b82645af08192a83bdbd7208aad8
44.7 kB Preview Download