Manufacturing using Advanced Powder Processes

There is a newer version of the record available.

Published July 23, 2020 | Version v1
Dataset Restricted

Variation of texture anisotropy and hardness with build parameters and through height in direct energy deposited 316L steel

Authors/Creators

  • 1. University of Sheffield

Contributors

  • 1. University of Sheffield
  • 2. Rolls-Royce plc

Description

Raw data associated with a paper submission.
"Variation of texture anisotropy and hardness with build parameters and through height in direct energy deposited 316L steel" submitted to Additive Manufacturing.

Contained are all the raw images used in figures, as well as csv's of any data pltoted in graphs.

Raw images captured during printing of various processing parameters
EBSD scans (.ctf) of all disucssed samples 

Wall definitions (EBSD compared to paper)
Wall 1 - Wall A1    300 W    2750 mm/s
Wall 2 - Wall D        500 W    2250 mm/s
Wall 3 - Wall B        300 W    2250 mm/s
Wall 4 - Wall C        500 W    2750 mm/s
Wall 5 - Wall A2    300 W    2750 mm/s

Files

Restricted

The record is publicly accessible, but files are restricted to users with access.

Additional details

Funding

UK Research and Innovation
Sir Henry Royce Institute -Sheffield Equipment EP/P02470X/1
UK Research and Innovation
MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes EP/P006566/1
UK Research and Innovation
Sir Henry Royce Institute - recurrent grant EP/R00661X/1
UK Research and Innovation
The Royce: Capitalising on the investment EP/S019367/1
UK Research and Innovation
NPIF EPSRC Doctoral - University of Sheffield 2017 EP/R512175/1