IAWAS - Development of Alternating Current Plasma Transfer Arc (ACPTA) for Additive Manufacturing
Description
In the framework of the CleanSky project IAWAS, these data have been gather for the Work Package 3 on process development.
These files provide the experimental data gathered during the preliminary development of ACPTA for aluminium lithium wire + arc additive manufacturing. The results anlysis is provided in the deliverable 3.4.
- The excel files are the experimental data sheet
- The AMV compressed folders gather the arc voltage and current raw measurements
- The AMV data are analysed and the results are provided by the excel file Characterisation of the ACPTA arcs for different process targets
Files
Restricted
The record is publicly accessible, but files are restricted. Log in to check if you have access.
Request access
If you would like to request access to these files, please fill out the form below.
You need to satisfy these conditions in order for this request to be accepted:
These raw data can be accessed by the IAWAS project partners who wish to review them. The finding linked to these data are available in the deliverable D3.4.
People outside this project who wish to have access to these data can request access. Access will be granted for non-commercial use only, and a declaration acknowledging Cranfield University is the data owner will be required. The request should also be supported by the guarantee that acknowledgement to the IAWAS project, Cranfield University and Eloise Eimer will be made along with any publication and presentation including some of the data provided.
You are currently not logged in. Do you have an account? Log in here
Additional details
Funding
Subjects
- IAWAS
- 821371