Published June 18, 2006
| Version v1
Conference paper
Open
The relationship between capillary pressure, saturation and interfacial area from a model of mixed-wet triangular tubes
Description
Fluid-fluid interfacial area is recognized as an important parameter in
understanding various multiphase flow processes in porous media. Mass transfer
processes such as dissolution, adsorption and volatilization occur across interfaces
and are strongly related to interfacial area. Moreover, the coefficient for
interfacial mass transfer is assumed to be proportional to the interfacial area. It
has also been observed experimentally that surfactants and bacteria may
preferentially accumulate at the interfaces and affect the subsequent fluid
transport. To quantify the efficiency and consequences of these processes, the
magnitude of the interfacial area is required.
In this paper we use a simple, yet physically-based, bundle-of-triangular-tubes
model to calculate interfacial area for mixed-wet conditions and contact angle
hysteresis. In such a representation of the pore network, capillary displacements
may either occur as piston-like displacements of the fluids occupied in the bulk, or
as piston-like displacements of fluids in layers. Accurate expressions for the
associated capillary entry pressures are implemented. The simulated interfacial area
vs. saturation data displays the same general trends as experimental measurements.
We also derive analytical expressions for the relationship between specific
interfacial area, capillary pressure and saturation for primary drainage. Based on
these expressions, we formulate flexible correlations for subsequent invasion
processes. The correlations are compared with the simulated data, and good agreement
is obtained. The proposed correlations are consistent with the well-known Brooks-
Corey correlation and may also be implemented in reservoir simulators.
Finally, we use our model to explore the conjecture by Hassanizadeh and Gray who
suggested that hysteresis can be eliminated in the relationship between capillary
pressure, saturation and specific interfacial area. We find that hysteresis may be
significant for both water-wet and mixed-wet conditions as long as contact angle
hysteresis is assumed.