Published June 25, 2019 | Version v1

Fabrication and Morphological Characterization of High-Efficiency Blade-Coated Perovskite Solar Modules

  • 1. CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, Roma 00133, Italy
  • 2. Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS, U.K.
  • 3. Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS, U.K. and IPVF, Ile-de-France Photovoltaic Institute (IPVF), 30 Route Départementale 128, Palaiseau 91120, France
  • 4. CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, Roma 00133, Italy and Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Energy Efficiency Unit Department, Via Anguillarese, 301, 00123 Santa Maria di Galeria, Rome, Italy
  • 5. CHOSE—Centre for Hybrid and Organic Solar Energy, University of Rome Tor Vergata, via del Politecnico 1, Roma 00133, Italy and LASE—Laboratory for Advanced Solar Energy, National University of Science and Technology MISiS, Leninskiy Prospect, Moscow 119049, Russia

Description

Organo-metal halide perovskite demonstrates a large potential for achieving highly efficient photovoltaic devices. The scaling-up process represents one of the major challenges to exploit this technology at the industrial level. Here, the scaling-up of perovskite solar modules from 5 × 5 to 10 × 10 cm2 substrate area is reported by blade coating both the CH3NH3PbI3 perovskite and spiro-OMeTAD layers. The sequential deposition approach is used in which both lead iodide (PbI2) deposition and the conversion step are optimized by using additives. The PbI2 solution is modified by adding methylammonium iodide (MAI) which improves perovskite crystallinity and pore filling of the mesoporous TiO2 scaffold. Optimization of the conversion step is achieved by adding a small concentration of water into the MAI-based solution, producing large cubic CH3NH3PbI3 grains. The combination of the two modifications leads to a power conversion efficiency of 14.7% on a perovskite solar module with an active area of 47 cm2.

Notes

The CHOSE team gratefully acknowledges the project funding of PERSEO-"PSCs: toward high efficiency and long-term stability" (Bando PRIN 2015-Italian Ministry of University and Scientific Research (MIUR) no. 20155LECAJ), the European Union's Horizon 2020 Framework Program for funding Research and Innovation under grant agreement no. 653296 (CHEOPS) for funding, the European Union's Horizon 2020 Framework Program for funding Research and Innovation under grant agreement no. 764047 (ESPRESSO). A.D.C. gratefully acknowledges the financial support of the Ministry of Education and Science of the Russian Federation in the 637 framework of Megagrant no. 074-02-2018-327. S.C., F.U.K., G.D. and C.D. acknowledge funding from the ERC under grant number 25961976 PHOTO EM, the European Union under grant number 77 312483 ESTEEM2 and the Henry Royce Institute (EP/P024947/1 and EP/R00661X/1). F.U.K. thanks the Jardine Foundation for a doctoral scholar- ship. L.A.C. acknowledges funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 764787 (MAESTRO). Finally, the CHOSE team gratefully acknowledges CICCI Research s.r.l. for the fruitful collaboration.

Files

Restricted

The record is publicly accessible, but files are restricted. Log in to check if you have access.

Additional details

Funding

European Commission
MAESTRO - MAking pErovskiteS TRuly explOitable 764787
European Commission
ESPResSo - Efficient Structures and Processes for Reliable Perovskite Solar Modules 764047
European Commission
CHEOPS - Production technology to achieve low Cost and Highly Efficient phOtovoltaic Perovskite Solar cells 653296