Installing a EC Sensor on a remote location.

1.Introduction

The objective of this document is to provide a description of the dataset entitled “Installing an EC Sensor on a remote location”.

The guidelines on how to use the files are included in this document.

The dataset is part of the deliverables D9.4 (First data management plan) and D9.5 (Final data management plan).

2.Description of the data

2.1.Origin

This dataset includes data collected from the experiments related to the task “Installing a EC Sensor on a remote location” as part of the WP8 “validation in the industrial scenario”.

2.2.Type

The data consists of Eddy Current (EC) measurements.

2.3.Formats

The acquired data are available in several formats.

2.3.1.*.sidata files

These files are proprietary format that can be opened with the software “UPecView” supplied by Sensima Inspection (http://www.sensimainsp.com).
This software provides an interface familiar to what expected by eddy-current inspectors.

Each file includes all the relevant information that may be used for analysis: the measurements and the instrument configuration (ex. Excitation frequency of the probe) is contained in this file.

2.3.2.*.csv files

The csv files contain an export of the measurements only (without instrument settings); a comma separator is used. Each row is composed of the following variables: Time (s), Signal (in-phase), Signal (out-of-phase), Channel/state, Extra signal (ADC), Encoder coordinate 1 (x), Encoder coordinate 2 (y), Encoder coordinate 3 (z), Encoder error status.

3.Measurements indexing

Folder

Filename

Creation date

Description

Target

Location

EXP001

0001A

12.03.2019

Calibration block scan

Calibration block

Seville, Spain

EXP001

0001B

12.03.2019

Manual reference scan on weld pipe

Calibration block

Seville, Spain

EXP001

0002A

12.03.2019

Drone overall scan inspection and sensor deployment

Cement kiln

Seville, Spain

EXP001

0002B

12.03.2019

Deployed sensor

Cement kiln

Seville, Spain

EXP001

0002C

12.03.2019

Deployed sensor

Cement kiln

Seville, Spain

EXP001

0002D

12.03.2019

Permanent sensor removal

Cement kiln

Seville, Spain