Influence of manufacturing quality of laminated core on a turbogenerator exploitation term
Description
In English: [Shevchenko Valentina V. (2016) Influence of manufacturing quality of laminated core on a turbogenerator exploitation term // Electrical Engineering & Electromechanics (ISSN 2074-272X, eISSN 2309-3404), 4, pp. 28-33. doi.org/10.20998/2074-272X.2016.4.04 и https://doi.org/10.5281/zenodo.2597430]
The problem of calculating the flexural deformation of the laminated core of the stator turbogenerator is examined. The evaluation of the effect of gluing the core sheets on its bending stiffness based on the compliance of the insulating cover sheet of active steel. An impact of pressing effort on the relative movement of the package of sheets is determined. An effect of wear of the insulating layer between sheets of laminated core on its reliability is determined. Conclusions are drawn on how to determine the possibility of extending the life of turbogenerators on the basis of the data obtained. References 8, table 1, figures 5.
Keywords: laminated core, flexural deformation, stator of turbogenerator, flexural stiffness, insulation coating, pressing, time of exploitation.
На русском: [Шевченко В.В. Влияние качества изготовления многослойного сердечника на срок эксплуатации турбогенератора (англ.) // Электротехника и электромеханика (ISSN 2074-272X, eISSN 2309-3404), №4. - Украина, Харьков: НТУ "ХПИ", 2016. - С. 28-33. doi.org/10.20998/2074-272X.2016.4.04]
Рассмотрен расчет изгибной деформации шихтованного сердечника статора турбогенератора. Выполнена оценка влияния склейки листов сердечника на его изгибную жесткость с учетом податливости изоляционного покрытия листов активной стали, значения усилия прессовки пакета на относительное перемещение листов. Определено влияние износа изоляционного слоя между листами шихтованного сердечника на его надежность. Сделаны выводы, как на основании полученных данных установить возможность продления срока эксплуатации турбогенераторов. Библ. 8, табл. 1, рис. 5.
Ключевые слова: шихтованный сердечник, изгибная деформация, статор турбогенератора, изгибная жесткость, изоляционное покрытие, прессовка, время эксплуатации.
На сайте издательства: сборник, статья - открыть pdf.
Репозиторий НТУ "ХПИ" - открыть pdf. Архив НТУ "ХПИ" - открыть pdf. На GALE. На CORE.
Библиотека Вернадского - скачать pdf. РИНЦ (elibrary.ru): сборник, статья - открыть pdf.
Киберленинка. Кафедра электрических машин НТУ "ХПИ" - открыть pdf
На Proquest - открыть pdf, открыть pdf. На Ingentaconnect.
Cборник на zenodo: https://doi.org/10.5281/zenodo.2597434.
Files
2016 Shevchenko EE&EM No.4.pdf
Additional details
References
- Shevchenko V.V. Methods of quantitative assessment of technical condition electrical equipment to determine the need for its rehabilitation or replacement. Collected materials of the Int. sci.-pract. conf. «Modern trends in the MRO. Diagnostics of equipment of mining and metallurgical and energy complexes (PBMCs)», 10-12 September 2015, pp. 39-42. (Rus).
- Vasilev V.S., Johansen V.I. Experience and projects construction of deep modernization of powerful turbogenerators stator in the conditions of power. Electrical Appliances 2003: Abstracts of the conference. St. Petersburg, Electrosila, 2003. pp. 9-12. (Rus).
- Shevchenko Valentina V., Minko A.N. (2014) Modernization of domestic turbogenerators designs to meet the requirements of maintaining their competitiveness (rus.) / Proceedings of the International Symposium "Problems of improvement of electrical machines and devices. Theory and Practice" (SIEMA'2014), October 23-24, 2014, Kharkov, NTU "KPI", poster report №124 // Proceedings of the National Technical University "Kharkiv Polytechnic Institute", the series "Electric machines and electromechanical energy conversion" (ISSN 2409-9295), 38(1081), pp. 146-155. https://doi.org/10.5281/zenodo.2561562
- Warsawskiy G.Y. Influence segments and laminating the stator iron on the magnetic vibration of electrical machines AC. St. Petersburg: Collected Electrosila, 1989, no.37, pp. 42-45. (Rus).
- Vaskovskyi Yu.N., Shumilov Yu.A., Shtogrin A.V. Analysis of vibration-exciting axial forces in a powerful turbogenerator stator core / Electrical engineering & electromechanics, 2009, no.2, pp. 21-26. (Rus). https://doi.org/10.20998/2074-272x.2009.2.04.
- Geller P.L., Burak A.M., Sinayuk S.L. Indicators of active stator turbogenerator packages strength steel, which are glued. Dynamics and strength of powerful turbo- and hydrogenerators. – Collected USRIE, 1987, pp. 9-14. (Rus).
- Johansen V.I. The effect on the rigidity of the stator core turbogenerator pasting active steel. Leningrad: Collection «Methods for calculating the turbo- and hydrogenerators», 1975, no.95, p. 103. (Rus).
- Johansen V.I., Storozhev V.D. Calculation of the mechani- cal characteristics of the bonded electrical steel packages. Len- ingrad: Collection Electrosila, 1976, no.31, pp. 102-105. (Rus).