SHEAR-1

The data shared here were collected as part of the SHEAR project funded by the Swiss National Science Foundation under the grant number:  200021E_189448.

The data are the source data of the published article: http://www.doi.org/10.1088/1361-6595/ad6691

The metadata file is constructed as follows:

Pressure_Pa -> The working gas pressure either Argon or Helium. 
RF_Peak_Amplitude_V -> The targetted RF peak amplitude
Measured_RF_Peak_to_Peak_Amplitude_V -> The measured RF peak to peak amplitude
Ratio_Ag/Ap -> The geometrical area ratio set during the measurement
DCShift_V -> the DC shift if any applied on the Langmuir probe measurement
RFEA_or_LP -> Wether the measurement is retarding field Energy analyser (RFEA) or Langmuir probe (LP) measurement.
Data_filename -> The filename of the corresponding measurment datafile.

Date    Gas    Pressure_Pa    RF_Peak_Amplitude_V    Measured_RF_Peak_to_Peak_Amplitude_V    Ratio_Ag/Ap    DCShift_V    RFEA_or_LP    Data_filename
20220824    Argon    10Pa    50    102    1        LP    Argon_10Pa_50V_20220824_R1_20220824_LP_R1_102V_10Pa_13MHz - Average.csv
20220824    Argon    10Pa    50    93    94        LP    Argon_10Pa_50V_20220824_R175_20220824_LP_R940_93V_10Pa_13MHz - Average.csv
20220824    Argon    10Pa    50    93    100        RFEA    Argon_10Pa_50V_20220824_RFEA_20220824_RFEA_R100_93V_10Pa_13MHz-Average.csv