Published September 28, 2018
| Version v1
Dataset
Open
IODP Expedition 368 Moisture and Density
Authors/Creators
- Larsen, Hans Christian
-
Sun, Zhen
-
Stock, Joann M.
- Jian, Zhimin
-
Alvarez Zarikian, Carlos A.
-
Klaus, Adam
-
Boaga, Jacopo
- Bowden, Stephen A.
-
Briais, Anne
-
Chen, Yifeng
-
Childress, Laurel B.
-
Cukur, Deniz
-
Dadd, Kelsie A.
- Deng, Jia-Ming
-
Ding, Weiwei
-
Dorais, Michael J.
-
Ferre, Eric C.
-
Ferreira, Fabricio
- Furusawa, Akira
-
Gewecke, Aaron J.
-
Hinojosa, Jessica L.
-
Hofig, Tobias W.
- Hsiung, Kan His
- Huang, Baoqi
- Huang, Enqing
- Huang, Xiao Long
-
Jiang, Shijun
- Jin, Haiyan
-
Johnson, Benjamin G.
-
Kurzawski, Robert M.
- Lei, Chao
- Li, Baohua
- Li, Li
- Li, Yanping
- Lin, Jian
-
Liu, Chang
- Liu, Chuanlian
- Liu, Zhifei
-
Luna, Antonio
- Lupi, Claudia
- McCarthy, Anders J.
- McIntosh, Kirk
-
Mohn, Geoffroy
-
Ningthoujam, Lachit Singh
- Nirrengarten, Michael F.R.
- Osono, Nobuaki
-
Peate, David W.
-
Persaud, Patricia
-
Qiu, Ning
- Robinson, Caroline M.
-
Satolli, Sara
- Sauermilch, Isabel
-
Schindlbeck, Julie C.
-
Skinner, Steven M.
-
Straub, Susanne M.
-
Su, Chih C.
- Su, Xiang
- Tian, Liyan
-
van der Zwan, Froukie M.
-
Wan, Shiming
-
Wu, Huaichun
- Xiang, Rong
- Yadav, Rajeev
- Yi, Liang
-
Zhang, Cuimei
- Zhang, Jinchang
-
Zhang, Yang
-
Zhao, Ning
-
Zhong, Guangfa
- Zhong, Lifeng
Contributors
Data collector:
Description
Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.
Files
MAD-README.txt
Files
(18.8 MB)
| Name | Size | Download all |
|---|---|---|
|
md5:fd0541d576f865234343d5e5802f8493
|
1.4 kB | Download |
|
md5:4d0bfa73fd6af05e61ac4055ca3a5b49
|
42.3 kB | Preview Download |
|
md5:91ff2d20fca08c3f2b20270d362a268e
|
12.3 kB | Preview Download |
|
md5:fd4a61bf685bcbf862ef5590acfade3b
|
11.8 kB | Preview Download |
|
md5:7a3f1361e1bd14f8c0dccf2fffe03774
|
2.9 kB | Preview Download |
|
md5:2875f7509f361e1dfa03678b5466b257
|
4.6 kB | Preview Download |
|
md5:e420b3b7fa720e332eee7082fcb15423
|
51.8 kB | Preview Download |
|
md5:98017f72298e811169c71de798c3787e
|
50.1 kB | Preview Download |
|
md5:855009b1609a30be9f052e595d16f945
|
18.6 MB | Preview Download |
Additional details
Related works
- Is documented by
- Publication: 10.14379/iodp.proc.367368.2018 (DOI)
Funding
- U.S. National Science Foundation
- Management and Operations of the JOIDES Resolution as a Facility for the International Ocean Discovery Program (IODP) 1326927