Published October 10, 2018 | Version v1

Characterizing Creep Behaviour of Modified 9Cr1Mo Steel by using Small Punch Impression Technique for Thermal Powerplants

  • 1. Research Scholar,Department of Mechanical Engineering, Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab, India
  • 2. Senior Scientist, Project Planning and Engineering Division, CSIR-National Metallurgical Laboratory, Jamshedpur, Jharkhand, India
  • 3. Associate Professor,Department of Mechanical Engineering, Dr. B R Ambedkar National Institute of Technology, Jalandhar, Punjab, India

Description

Modified 9Cr1Mo (P91) having ferritic/martensitic structure is a candidate material for thermal powerplant industry due to its enhanced creep resistance. Fusion welding of P91 steel nurtures heat affected zone (HAZ) which gives rise to infamous type IV failure/cracking. The origination of type IV cracking still remains ambiguous mainly due to sampling constraints from P91 - HAZ subzones owing to thin width of HAZ. In present work, this issue is investigated with the help of small punch impression creep technique. Thermo – mechanical simulator Gleeble®-3800 is used to physically simulate HAZ subzones of P91 steel representing HAZ – CG, HAZ – FG and HAZ – IC. Impression creep tests done on parent metal P91 and its simulated HAZ subzones at a stress level of 270 MPa and 600℃ reveal HAZ – IC as the weakest subzone followed by HAZ – FG. Coarsening of chromium rich carbides on prior austenite grain boundaries (PAGBs) associated with blended phase transformations in HAZ – IC render it as the most degraded HAZ subzone in P91 steel thus becoming an initiating location for type IV cracking. Furthermore, presence of relatively fine carbides combined with less inter-lath spacing in P91 steel and its HAZ – CG contribute towards retarding creep rate leading to an increase in heterogeneous creep behaviour among HAZ subzones and parent metal.

Files

(47-61)manuscript akhil_1-format.pdf

Files (2.0 MB)

Name Size
md5:96b17597a725c991740af62dbcc00a02
2.0 MB Preview Download

Additional details

References

  • Abson, D. J. and Rothwell, J. S., 2013. Review of type IV cracking of weldments in 9–12% Cr creep strength enhanced ferritic steels. International Materials Reviews, 58, 437-473.
  • Akhtar, M., Khajuria, A., Sahu, J. K., Swaminathan, J., Kumar, R., Bedi, R. and Albert, S.K. 2018. Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applications. Applied Nanoscience, 8, 1-17.
  • Brett, S. J., 2005. In service Type IV cracking in a modified 9Cr (grade91) header. Proc. Creep and Fracture in High Temperature Components-Design and Life Assessment Issues, 2005, 563.
  • Banerjee, K., Perez, M. and Militzer, M., 2011. Non-isothermal austenite grain growth kinetics in the HAZ of a micro-alloyed X-80 line pipe steel. In Solid State Phenomena, 172, 809-814.
  • Callister, W. D. and Rethwisch, D.G., 2000. Fundamentals of materials science and engineering, London, UK, Wiley.
  • Cerjak, H. H. and Mayr, P., 2008. Creep strength of welded joints of ferritic steels. In Creep resistant steels, Woodhead Publications.
  • Das, C. R., Albert, S. K., Bhaduri, A.K. and Murty, B.S., 2012. Understanding room temperature deformation behaviour through indentation studies on modified 9Cr–1Mo steel weldments. Materials Science and Engineering A, 552, 419-426.
  • Divya, M., Das, C.R., Albert, S. K., Goyal, S., Ganesh, P., Kaul, R., Swaminathan, J., Murty, B. S., Kukreja, L. M. and Bhaduri, A. K., 2014. Influence of welding process on Type IV cracking behavior of P91 steel. Materials Science and Engineering A, 613, 148-158.
  • Evans, R.W. and Wilshire, B., 1985. Creep of metals and alloys, Institute of metals.
  • Easterling, K., 2013. Introduction to the physical metallurgy of welding. Elsevier.
  • Francis, J. A., Mazur, W. and Bhadeshia, H. K. D. H., 2006. Review type IV cracking in ferritic power plant steels. Materials Science and Technology, 22, 1387-1395.
  • Gibbs, W. S., Matlock, D. K., Olson, D. L. and Wang, S. H., 1985. High temperature impression creep testing of weldments. Welding Journal, 64.
  • Godec, M. and Balantič, D. S., 2016. Coarsening behaviour of M23C6 carbides in creep-resistant steel exposed to high temperatures. Scientific reports, 6, 29734.
  • Gupta, R. and Daniel, B.S.S., 2018. Impression creep behaviour of ultrasonically processed in-situ Al3Ti reinforced aluminium composite. Materials Science and Engineering: A, 733, 257-266.
  • Holzer, I., 2010. Modelling and simulation of strengthening in complex martensitic 9-12% Cr steel and a binary Fe-Cu alloy. PhD Thesis, TU Graz, Austria.

Subjects