Test dataset for "Steam condensation scaled experiment in the presence of non-condensable gases for small modular reactor containment passive safety"

This study presents scaled experiments using steam condensation with non-condensable gas (NCG)—helium (He), simulating hydrogen, and nitrogen (N₂)—as these experiments are pivotal for water-cooled reactor passive containment cooling system (PCCS) design and analysis. Research into PCCSs for small modular reactors (SMRs) is especially important in light of SMR system design; however, studies in the literature reflect limitations due to test geometry and operational condition variations, without considering SMR prototypic design. To address these challenges, a scaled test facility was developed to accurately replicate SMR PCCSs. This facility includes vertical down-flow condensing test sections with 1-, 2-, and 4-in.-diameter condensing tubes, accompanied by annular water cooling. Experiments were conducted using both superheated and saturated steam, with steam mass flow rates in the presence of NCG varying from: (a) 55 to 66 kg/hr. of steam, and 1.8 to 22 kg/hr. of He (as the NCG); (b) 58 to 63 kg/hr. of steam, and 4.4 to 13.3 kg/hr. of N₂ (as the NCG). Test data were collected on (a) the axial temperatures of the annular cooling water; (b) the outer wall temperature of the condensers; and (c) the mass flow rate, temperature, and pressure at the test section inlets and outlets. These primary test data were used in conjunction with a standard data reduction methodology to estimate essential thermal parameters such as heat fluxes, heat transfer coefficients, and condensation rates. The effects of NCGs on steam condensation within the geometry of the scaled test sections were then presented in regard to various testing conditions.