Published May 7, 2018 | Version v1

On the Challenge of Five-Hole-Probe Measurements at High Subsonic Mach Numbers in the Wake of Transonic Turbine Cascades

  • 1. Institute of Jet Propulsion, Bundeswehr University Muenchen, Germany

Description

Five-hole-probes are common use in turbomachinery flow investigations, even though, inserting a probe into a flow field inevitably induces perturbations to the flow which can falsify the measurement results, especially when exposed to transonic flows. The objective of the investigations presented here is to evaluate the Mach number measurements of a five-hole-probe (5HP) in the wake flow of a transonic turbine cascade at engine relevant Reynolds numbers by comparing them to the results of particle image velocimetry (PIV). Furthermore, PIV measurements were performed with inserted probe to investigate the influence of the probe on the wake flow field. Together with a sensitivity study of 5HP measurements in flow regimes close to Ma=1, the results demonstrate how the measurement uncertainty can be improved in high subsonic flow regimes.

Files

GPPS-NA-2018-0013.pdf

Files (882.5 kB)

Name Size
md5:e576b71126d8c45d45de52fc6336cf91
882.5 kB Preview Download

Additional details

References

  • Bohn, D. (1977). "Untersuchung zweier verschiedener axialer ̈ Uberschallverdichterstufen unter besonderer Berücksichtigung der Wechselwirkungen zwischen Lauf- und Leitrad". PhD thesis. Aachen: RWTH Aachen.
  • Bohn, D. and H. Simon (1975). "Mehrparametrige Approximation der Eichräume und Eichfl ̈ achen von Unterschall- bzw. Überschall-5-Loch-Sonden". tm - Technisches Messen Lieferung 470. DOI : 10.1524/teme.1975.468479. jg.81 .
  • Carscallen, W. E., T. C. Currie, S. I. Hogg, and J. P. Gostelow (1999). "Measurement and Computation of Energy Separation in the Vortical Wake Flow of a Turbine Nozzle Cascade". ASME J. Turbomach. 121.4, p. 703. DOI : 10.1115/ 1.2836723 .
  • Eckert, E. and W. Weise (1942). "Messungen der Temper- aturverteilung auf der Oberfläche schnell angeströmter unbe- heizter Körper". Forsch Ing-Wes 13.6, pp. 246–254. DOI : 10. 1007/BF02585343 .
  • Fransson, T., F. Schaller, and K. Schulz (1988). "Change of Flow Conditions due to the Introduction of an Aerodynamic Probe during Calibration". In: 9th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines . Oxford, UK.
  • Gostelow, J. P. and W. E. Carscallen (2010). "Investigation of Eckert-Weise Energy Separation in the Wakes of Turbine Blades and Circular Cylinders". In: 17th Australasien Fluid Mechanics Conference . Auckland, New Zealand.
  • Grimshaw, S. D. and J. V. Taylor (2016). "Fast settling millimetre-scale Five-Hole-probe". In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition . Seoul, South Korea.
  • Hancock, P. E. (1988). "A Theoretical Constraint at M=1 for Intrusive Probes and Some Transonic Calibrations of Sim- ple Static-Pressure and Flow-Direction Probes". In: 9th Sym- posium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines . Oxford, UK.
  • Hoenen, H. T., R. Kunte, P. Waniczek, and P. Jeschke (2012). "Measuring Failures and Correction Methods for Pneumatic Multi-Hole Probes". In: ASME Turbo Expo 2012: Turbine Technical Conference and Exposition . Copenhagen, Denmark, p. 721. DOI : 10.1115/GT2012-68113 .
  • Klinner, J. and C. Willert (2013). "Application of Tomographic PIV in a Transonic Cascade". In: 10th International Symposium on Particle Image Velocimetry . Delft, Netherlands.
  • Kost, F. (2009). "The behaviour of probes in transonic flow fields of turbomachinery". In: 8th European Conference on Turbomachinery (ETC) . Graz, Austria.
  • Langford, R. W., K. R. Keeley, and N. B. Wood (1982). "Investigation of the Transonic Calibration Characteristics of Turbine Static Pressure Probes". In: ASME 1982 International Gas Turbine Conference and Exhibit . London, England. DOI : 10.1115/82-GT-280 .
  • Raffel, M., C. E. Willert, Steven T. Wereley, and J. Kompenhans (2007). Particle Image Velocimetry: A Practical Guide . Experimental Fluid Mechanics. Springer.
  • Sartor, F., G. Losfeld, and R. Bur (2012). "PIV study on a shock-induced separation in a transonic flow". Experiments in Fluids 53.3, pp. 815–827. DOI : 10.1007/s00348-012- 1330-4 .
  • Sturm, W. and L. Fottner (1985). "The High-Speed Cas- cade Wind-Tunnel of the German Armed Forces University Munich". In: 8th Symposium on Measuring Techniques for Transonic and Supersonic Flows in Cascades and Turboma- chines . Genua, Italy.
  • Truckenmüller, F. and H. Stetter (1996). "Measurement errors with pneumatic probes behind guide vanes in transonic flow-fields". In: 13th Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines . Zürich, Switzerland.
  • Veerman, H. P. J., F. L. A. Ganzevles, and K. Pengel (2004). "Wake Vortex Investigations by Means of Stereoscopic PIV and 5-Hole Probe". In: Particle Image Velocimetry: Re- cent Improvements: Proceedings of the EUROPIV 2 Workshop held in Zaragoza, Spain, March 31 – April 1, 2003 . Ed. by Stanislas, M., Westerweel, J., and Kompenhans, J. Berlin, Heidelberg: Springer, pp. 67–82.
  • Vinnemeier, F., L. Simon, and W. Koschel (1990). "Korrektur des Kopfgeometrieeinflusses einer Fünfloch- Druck- sonde auf die Meßergebnisse". tm - Technisches Messen 57. DOI : 10.1524/teme.1990.57.jg.296 .