Published October 9, 2013
| Version v1
Conference paper
Restricted
EFD-C(13)01/11 Tile Profiler Analysis of Samples from JET ITER-Like Wall and Carbon Wall
Description
A complete global balance for material transport in JET requires knowledge of the net erosion in the main chamber, net deposition in the divertor and the amount of dust in the divertor region. Following the end of the first JET ITER-Like Wall campaign a set of tiles has been removed from the main chamber and the divertor. This paper describes the initial tile surface profiling results for evaluating the erosion in the main chamber and deposition in the divertor. Tile profiling was performed on upper dump plate tiles, inner wall guard limiters made of beryllium and on inner divertor tiles made of tungsten coated carbon-fibre composites. Additionally, the mass of dust collected from the JET divertor is also reported. Present results are compared with JET-C campaign results with the all carbon wall.
Notes
Preprint of Paper to be submitted for publication in Proceedings of the 14th International Conference on Plasma-Facing Materials and Components for Fusion Applications, Jülich, Germany. 13th May 2013 - 17th May 2013
Files
Restricted
The record is publicly accessible, but files are restricted. Log in to check if you have access.