Rock-temperature, fracture displacement and acoustic/micro-seismic data measured at Matterhorn Hörnligrat, Switzerland

This repository contains data, which were acquired in the context of project X-Sense2 (financed by nano-tera.ch, ref. no. 530659) at the Matterhorn Hörnligrat fieldsite on 3500 m a.s.l. from 2015 until 1 January 2018. These data were used in the following publication:

Weber, S., Faillettaz, J., Meyer, M., Beutel, J., and Vieli, A.: Acoustic and micro-seismic characterization in steep bedrock permafrost on Matterhorn (CH), Journal of Geophysical Research: Earth Surface, in review, 2018.

AM-DATA This repository contains selected accelerometer data with SI unit m/s² (hourly .miniseed-files, MH40 refers to AM_scarp). These data were measured continuously using an accelerometer based on a Wilcoxon 728A/T (10 − 10000 Hz, 24 kHz resonance frequency), netADC data acquisition system and netSP+ seismological processor of Institute of Mine Seismology. Data were synchronized to a global time reference using GPS (<1 μs). The data is stored in .miniseed-format and splitted in hourly files.

SM-DATA This repository contains selected raw seismometer data in counts (hourly .miniseed-files, MHDL refers to SM_scarp and MHDT refers to SM_ridge). These data were measured using a Lennartz electronic low-noise seismometer LE-3Dlite MKIII (1−100 Hz) and Nanometrics Centaur digital recorder, a 24-bit high-resolution seismic data acquisition system disciplined by GPS (<100 μs) with a sampling rate of 1000 sps. The data is stored in .miniseed-format and splitted in hourly files.

TIMESERIES This repository contains 8 timeseries:

• AS_scarp_high.csv describes the threshold triggeres acoustic emission hits acquired with a piezoelectric sensor Mistras Physical Acoustics Corporation R6α, 35−100 kHz, 55 kHz resonance frequency.

• AS_scarp_low.csv describes the threshold triggeres acoustic emission hits acquired with a piezoelectric sensor Mistras Physical Acoustics Corporation R.45, 5−30 kHz, 20 kHz resonance frequency.

• CR_old.csv described the measured fracture displacement in mm.

• SMridge_nofilter.csv describes automatically triggered events using a recursive short-term/long-term average (STA/LTA ) algorithm without filtering. Peak amplitude in µm/s and energy in µm²/s².

• SMridge_filtered.csv describes automatically triggered events using a recursive short-term/long-term average (STA/LTA ) algorithm in the frequency band 33-67 Hz. Peak amplitude in µm/s and energy in µm²/s².

• SMscarp_filtered.csv describes automatically triggered events using a recursive short-term/long-term average (STA/LTA ) algorithm without filtering. Peak amplitude in µm/s and energy in µm²/s².

• SMscarp_nofilter.csv describes automatically triggered events using a recursive short-term/long-term average (STA/LTA ) algorithm in the frequency band 33-67 Hz. Peak amplitude in µm/s and energy in µm²/s².

• temperature.csv describes the rock temperature (in °C) at different depths: 5, 10, 20, 30, 50 and 100 cm.

All time stamps are in UTC.