Published September 12, 2024 | Version v1

Continuous Flow Synthesis and Simulation-Supported Investigation of Tunable Plasmonic Gold Patchy Nanoparticles

Description

This is the dataset for the following manuscript "Continuous Flow Synthesis and Simulation-Supported Investigation of Tunable Plasmonic Gold Patchy Nanoparticles".

Abstract

Plasmonic nanoparticles have intriguing optical properties which make them suitable candidates for sensing or theranostic applications. Anisotropic patchy particles, where metal is locally deposited on the surface of a core particle, exhibit plasmon resonances that can be specifically adjusted for these applications. However, many existing synthesis routes are complex, yield too little material, or provide particles with limited optical tunability. In this work, we present a simple and scalable continuous flow synthesis of gold-on-polystyrene patchy particles with widely adjustable optical properties. By increasing the chloride concentration in the electroless deposition of gold, we slow down the redox reduction kinetics and obtain a dense patch morphology as well as a reduced nucleation rate. The latter is counteracted by introducing a low-level seeding approach where a small number of gold nanocrystals heterocoagulate with the core particles prior to patch growth. Seeding and patch growth are performed in a continuous flow set-up with two T-shaped milli-mixers. The resulting patchy particle samples exhibit a tunable dipolar plasmon peak between 600 nm and 1100 nm. We also investigate the structure-property relationship for our gold patchy particles using Finite Element Method simulations. After identifying a suitable patch shape model, we elucidate the influence of individual geometric parameters on the optical properties and show that the relationship holds true for a large range of patch coverages. Finally, we apply the relationship to explain the time-dependent change in the optical properties of as-synthesized patches by correlating it with the patch shape transformation revealed by electron microscopy.

 

The uploaded data are sorted by figure.

Notes (English)

Funding Information: Deutsche Forschungsgemeinschaft (DFG, German Research Foundation): Collaborative Research Centre 1411 "Design of Particulate Products" (Project-ID 416229255) and Research Training Group GRK1896 "In-situ Microscopy with Electrons, X-rays and Scanning Probes" (Project-ID 218975129).
This data set is the unedited author's version of a submitted work that was accepted for publication in Nanoscale after peer review. To access the published article, see https://pubs.rsc.org/en/content/articlelanding/2024/nr/d4nr02516d.

Files

Files (1.2 MB)

Name Size
md5:743d6f83b87e01e73f28fe6d78d00f11
114.4 kB Download
md5:d1cc6b7b5a6571ad52958cec777caa65
57.1 kB Download
md5:db3fd21f121ba08a1cbe9fbdba8d6e93
66.4 kB Download
md5:02fb31bae76cb5dc4a62e28038bd4d8f
797.5 kB Download
md5:b95756979b05ef0077b46b079e0fa6d0
35.4 kB Download
md5:eb1c4a98985cd40c2ad5aefa66c0fb34
58.6 kB Download
md5:0889de3d1b48cdf527dd9bf82b19fe4b
66.3 kB Download
md5:14dab250f28f59c1567dd69bdfe173c0
25.1 kB Download

Additional details

Related works

Is published in
Journal article: 10.1039/D4NR02516D (DOI)

Funding

Deutsche Forschungsgemeinschaft
CRC 1411 - Design of Particulate Products 416229255
Deutsche Forschungsgemeinschaft
Research Training Group GRK1896 - In- situ Microscopy with Electrons, X-rays and Scanning Probes 218975129