Micro-Study of Dissimilar Welded Materials
Authors/Creators
Description
The dissimilar joint between aluminum/titanium
alloys (Al 6082 and Ti G2) were successfully achieved by CO2 laser
welding with a single pass and without filler material using the
overlap joint design. Laser welding parameters ranges combinations
were experimentally determined using Taguchi approach with the
objective of producing welded joint with acceptable welding profile
and high quality of mechanical properties. In this study a joining of
dissimilar Al 6082 / Ti G2 was resulted in three distinct regions
fusion area in the weldment. These regions are studied in terms of its
microstructural characteristics and microhardness which are directly
affecting the welding quality.
The weld metal was mainly composed of martensite alpha prime.
In two different metals in the two different sides of joint HAZ, grain
growth was detected. The microhardness of the joint distribution also
has shown microhardness increasing in the HAZ of two base metals
and a varying microhardness in fusion zone.
Files
10000982.pdf
Additional details
References
- Z. Jandric, M. Labudovic and R. Kovacevic, Effect of heat sink on microstructure of three-dimensional parts built by welding-based deposition, International J. of Machine Tools and Manufacture, Vol. 44, Issues 7-8, June 2004, pp. 785-796. W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA: Wadsworth, 1993, pp. 123–135.
- F. Caiazzo, F. Curcio, G. Daurelio and F. Memola Capece Minutolo, Ti6Al4V sheets lap and butt joints carried out by CO2 laser: mechanical and morphological characterization, J. of Materials Processing Technology, Vol. 149, Issues 1-3, June 2004, pp. 546-552.
- Z. Li and G. Fontana, Autogenous laser welding of stainless steel to free-cutting steel for the manufacture of hydraulic valves, J.of Materials Processing Technology, Vol. 74, Issues 1-3, Feb. 1998, pp. 174-182.
- Z. L. Zhang, J. Ødegård, O. R. Myhr and H. Fjaer, From microstructure to deformation and fracture behaviour of aluminium welded joints – a holistic modelling approach, J. of Computational Materials Science, Vol. 21, Issue 3, July 2001, pp. 429-435.
- W. Zhang, J. W. Elmer and T. DebRoy, Modeling and real time mapping of phases during GTA welding of 1005 steel, J. of Materials Science and Engineering A, Vol. 333, Issues 1-2, August 2002, pp. 320- 335.
- W. Zhang, T. DebRoy, T.A. Palmer and J.W. Elmer, Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure, J. of Acta Materialia, Vol. 53, Issue 16, September 2005, pp. 4441-4453.
- E. M. Anawa, A. G. Olabi and F. A. Elshukri "Modeling and optimization of tensile shear strength of Titanium/ Aluminum dissimilar welded component" J. of Physics: Conference Series 181 (2009), doi:10.1088/1742-6596/181/1/012033.
- F. Karimzadeh, A. Ebnonnasir and A. Foroughi, Artificial neural network modelling for evaluating of epitaxial growth of Ti6Al4V weldment, J. of Materials Science and Engineering: A, Vol. 432, Issues 1-2, Sep.2006, pp. 184-190.
- N. Kamp, A. Sullivan, R. Tomasi and J.D. Robson, Modeling of heterogeneous precipitate distribution evolution during friction stir welding process, J. of Acta Materialia, Vol. 54, Issue 8, May 2006, pp. 2003-2014. [10] N. Kamp, A. Sullivan and J.D. Robson, Modelling of friction stir welding of 7xxx aluminum alloys, J. of Materials Science and Engineering: A, Vol. 466, Issues 1-2, September 2007, pp. 246-255.