Published August 1, 2014
| Version 9999362
Journal article
Open
Analysis of a Double Pipe Heat Exchanger Performance by Use of Porous Baffles and Nanofluids
Authors/Creators
Description
The present work is a numerical simulation of
nanofluids flow in a double pipe heat exchanger provided with
porous baffles. The hot nanofluid flows in the inner cylinder, whereas
the cold nanofluid circulates in the annular gap. The Darcy-
Brinkman-Forchheimer model is adopted to describe the flow in the
porous regions, and the governing equations with the appropriate
boundary conditions are solved by the finite volume method. The
results reveal that the addition of metallic nanoparticles enhances the
rate of heat transfer in comparison to conventional fluids but this
augmentation is accompanied by an increase in pressure drop. The
highest heat exchanger performances are obtained when
nanoparticles are added only to the cold fluid.
Files
9999362.pdf
Additional details
References
- S. Chikh, A. Boumedien, K. Bouhadef and G. Lauriat, "Analytical solution of non-Darcian forced convection in an annular duct partially filled with a porous medium," Int. J. Heat Mass Transfer, vol. 38, 1995, pp. 1543–1551.
- S. Chikh, A. Boumedien, K. Bouhadef and G. Lauriat, "Non-Darcian forced convection in annulus partially filled with a porous material," Num. Heat Transfer Part A, vol. 28, 1995, pp. 707–722.
- S. Chikh, A. Boumedien, K. Bouhadef and G. Lauriat, "Amélioration du transfert de chaleur par un dépôt poreux sur la paroi d'un échangeur de chaleur tubulaire," Rev. Gén. Thermique, vol. 36, 1997, pp. 41–50.
- Z. Guo, H. J. Sung and J. M. Hyun, "Pulsating flow and heat transfer in an annulus partially filled with porous media," Num. Heat Transfer Part A, vol. 31, 1997, pp. 517–527.
- M. K. Alkam and M. A. Al-Nimr, "Improving the performance of double pipe heat exchangers by using porous substrates," Int. J. Heat Mass Transfer, vol. 42, 1999, pp. 3609–3618.
- N. Allouache and S. Chikh, "Second law analysis in partially double pipe heat exchanger," Trans. ASME J. Appl. Mech., vol. 73, 2006, pp. 60–65.
- H. Kahalerras and N. Targui, "Numerical analysis of heat transfer enhancement in a double pipe heat exchanger with porous fins," Int. J. Num. Methods Heat Fluid Flow, vol. 18, 2008, pp. 593–617.
- N. Targui and H. Kahalerras, "Analysis of fluid flow and heat transfer in a double pipe heat exchanger with porous structures," Energy Conv. Manage., vol. 49, 2008, pp. 3217–3229.
- S. M. H. Hashemi, S. A. Fazeli and H. Shokouhmand, "Fully developed non-Darcian forced convection slip-flow in a micro-annulus filled with a porous medium: analytical solution," Energy Conv. Manage., vol. 52, 2011, pp. 1054–1060. [10] N. Targui and H. Kahalerras, "Analysis of a double pipe heat exchanger performance by use of porous baffles and pulsating flow," Energy Conv. Manage., vol. 76, 2013, pp. 43–54. [11] M. Ghazvini and H. Shokouhmand, "Investigation of a nano-cooled microchannel heat sink using fin and porous media approaches," Energy Conv. Manage., vol. 50, 2009, pp. 2373–2380. [12] S. Ahmad and I. Pop, "Mixed convection boundary layer flow from a vertical flat plate embedded in a porous medium filled with nanofluids," Int. J. Heat Mass Transfer, vol. 37, 2010, pp. 987–991. [13] D. S. Cimpean and I. Pop, "Fully developed mixed convection flow of a nanofluid through an inclined channel filled with a porous medium," Int. J. Heat Mass Transfer, vol. 55, 2012, pp. 907–914. [14] M. Hajipour and A. M. Dehkordi, "Analysis of nanofluid heat transfer in parallel-plate vertical channels partially filled with porous medium," Int. J. Therm. Sciences, vol. 55, 2012, pp. 103–113. [15] E. Zarifi, G. Jahanfamia and F. Veysi, "Thermal-hydraulic modeling of nanofluids as the coolant in VVER-1000 reactor core by the porous media approach," Ann. Nuclear Energy, vol. 51, 2013, pp. 203–212 [16] A. J. Chamkha and M. A. Ismael, "Conjugate heat transfer in a porous cavity filled with nanofluids and heated by a triangular thick wall," Int. J. Therm. Sciences, vol. 67, 2013, pp. 135–151. [17] R. K. Tiwari and M. K. Das, "Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluids," Int. J. Heat Mass Transfer, vol. 50, 2007, pp. 2002–2018. [18] K. Vafai and C. L. Tien, "Boundary and inertia effects on flow and heat transfer in porous media," Int. J. Heat Mass Transfer, vol. 24, 1981, pp. 193–203. [19] H. C. Brinkman, "The viscosity of concentrated suspensions and solution," J. Chem. Phys., vol. 20, 1952, pp. 571–581. [20] J. C. A. Maxwell, "A treatise on electricity and magnetism," 2 Unabridged, 3rd ed. Clarendon Press, Oxford, UK, 1891. [21] S. V. Patankar, "Numerical heat transfer and fluid flow," New York, McGraw Hill, 1980.