Published June 2, 2014
| Version 9998606
Journal article
Open
Prediction of Nonlinear Torsional Behavior of High Strength RC Beams
Authors/Creators
Description
Seismic design criteria based on performance of
structures have recently been adopted by practicing engineers in
response to destructive earthquakes. A simple but efficient
structural-analysis tool capable of predicting both the strength and
ductility is needed to analyze reinforced concrete (RC) structures
under such event. A three-dimensional lattice model is developed in
this study to analyze torsions in high-strength RC members.
Optimization techniques for determining optimal variables in each
lattice model are introduced. Pure torsion tests of RC members are
performed to validate the proposed model. Correlation studies
between the numerical and experimental results confirm that the
proposed model is well capable of representing salient features of the
experimental results.
Files
9998606.pdf
Files
(453.4 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:afdd3d7e3a87a4d41ba6f299baf509e0
|
453.4 kB | Preview Download |
Additional details
References
- R.Clough, and S.Johnston, "Effect of stiffness degradation on earthquake ductility requirements", Transactions of Japan Earthquake Engineering Symposium, pp. 195-198, 1966.
- S.Otani, "Inelastic analysis of R/C frame structures", Journal of Structural Engineering ASCE, vol. 100, no. ST7, pp. 1433-1449, 1974.
- C.Meyer, M.S.Roufaiel, and S.G.Arzoumanidis, "Analysis of damaged concrete frames for cyclic loads", Earthquake Engineering and Structural Dynamics, vol. 11, no. 2, pp. 207-228, 1983.
- E.Spacone, F.C.Filippou, and F.F. Taucer, "Fibre beam-column model for nonlinear analysis of R/C frames: Part I. formulation", Earthquake Engineering and Structural Dynamics, vol. 25, pp. 711-725, 1996.
- C.G. Cho, G.J.Ha, and Y.Y.Kim, "Nonlinear Model of Reinforced Concrete Frames Retrofitted by In-filled HPFRCC Walls," Structural Engineering and Mechanics, vol. 30, no. 2, pp. 211-223, 2008.
- J.Schlaich,K. Schaefer, and M.Jennewein, "Towards a Consistent Design of Structural Concrete." Journal of the Prestressed Concrete Institute, vol. 32, pp. 74-150, 1987.
- Y. M. Yun, "Nonlinear strut-tie model approach for structural concrete,"American Concrete Institute Structure Journal, vol. 97, no. 4, pp. 581-590, 2000.
- T. N. Tjhin, and D. A. Kuchma, "Computer-Based Tools for Design by Strut-and-Tie Method: Advances and Challenges." ACI Structural Journal, vol. 99, no. 5, pp.586-594, 2002.
- E. Schlangen, and J. G. M. van Mier, "Shear fracture in cementitious composites, Part II: Numerical simulations, in: Z.P. Bazˇant (Ed.)," Fracture Mechanics of Concrete Structures (Proc., FraMCoS-1), Elsevier, London, pp. 671-676, 1992. [10] J.G.M.VanMier, A.Vervuurt, and E.Schlangen, "Boundary and size effects in uniaxial tensile tests: a numerical and experimental study", Fracture and Damage of Quasibrittle Structures, E&FN Spon, London/New York, pp. 289–302, 1994. [11] G.Lilliu, and J.G.M.vanMier, "3D Lattice type fracture model for concrete", Engineering Fracture Mechanics, vol. 70, no. 7/8, pp. 927-942, 2003. [12] T. Miki, "Nonlinear Analysis of Reinforced Concrete Structures Subjected to Seismic Loads by Using Three-dimensional Lattice Model", Ph. D. Thesis, Department of Civil Eng., Tokyo Institute of Technology, Tokyo, 2004. [13] T. Miki, and J. Niwa, "Nonlinear Analysis of RC Structural Members Using 3-D Lattice Model", Journal of Advanced Concrete Technology, vol.2, no.3, pp.343-358, 2004. [14] J.Niwa, "Equation for Shear Strength of Reinforced Concrete Deep Beams Based on FEM Analysis," Concrete Library of JSCE, No.4, pp.283-295, 1984. [15] J. Niwa, I. K. Choi, and T. Tanabe, "Analytical Study on Shear Resisting Mechanism of Reinforced Concrete Beams," J. of Materials, Concrete Structures, Pavement, JSCE, vol. 26, no. 508, pp.79-88, 1995. [16] M. H. MohdYassin, "Nonlinear Analysis of Prestressed Concrete Structures under Monotonic and Cyclic Loads," Ph. D. Thesis, Dept. of Civil Eng., UC, Berkeley, 1994. [17] D. C.Kent, and R.Park, "Flexural Members with Confined Concrete," Journal of Structure Eng., ASCE, vol. 97, no. ST7, pp. 1969-1990, 1971. [18] I. D.Karsan, and J. O. Jirsa, "Behavior of Concrete under Compressive Loadings," Journal of Structural Division, ASCE, vol. 95, no. ST12, pp. 2543-2563, 1969. [19] S. A. Sheikh, and S. M. Uzumeri, "Analytical Model for Concrete Confinement in Tied Columns," J. Struct., Div., ASCE, vol. 108, no. ST12, pp. 2703-2722, 1982. [20] G. Monti, and C. Nuti, "Nonlinear cyclic behavior of reinforcing bars including buckling,"Journal of structural engineering, vol. 188, no. 12, pp. 3268-3284, 1992. [21] American Concrete Institute, Building Code Requirements for Reinforced Concrete (ACI 318). Farmington Hills, Michigan, USA, 2012. [22] X.N.Peng, and Y.L. Wong, "Behavior of reinforced concrete walls subjected to monotonic pure torsion-An experimental study", Engineering Structural, vol.33, no.9, pp.2495-2508, 2011.