Published December 27, 2011
| Version 15865
Journal article
Open
A Study of Calcination and Carbonation of Cockle Shell
Authors/Creators
Description
Calcium oxide (CaO) as carbon dioxide (CO2)
adsorbent at the elevated temperature has been very well-received
thus far. The CaO can be synthesized from natural calcium carbonate
(CaCO3) sources through the reversible calcination-carbonation
process. In the study, cockle shell has been selected as CaO
precursors. The objectives of the study are to investigate the
performance of calcination and carbonation with respect to different
temperature, heating rate, particle size and the duration time. Overall,
better performance is shown at the calcination temperature of 850oC
for 40 minutes, heating rate of 20oC/min, particle size of < 0.125mm
and the carbonation temperature is at 650oC. The synthesized
materials have been characterized by nitrogen physisorption and
surface morphology analysis. The effectiveness of the synthesized
cockle shell in capturing CO2 (0.72 kg CO2/kg adsorbent) which is
comparable to the commercialized adsorbent (0.60 kg CO2/kg
adsorbent) makes them as the most promising materials for CO2
capture.
Files
15865.pdf
Additional details
References
- J. Butler, "NOAA annual greenhouse gas index," http://www.esrl.noaa.gov/gmd/aggi, August 12, 2011.
- Herzog, H.; Drake, E.; and E. Adams, "CO2 capture, reuse, and storage technologies for mitigating global climate change," Final Report DOE Contract No. DE-AF22-96PC01257, January 1997.
- M. G. Plaza, C. Pevida, A. Arenillas, F. Rubiera, and J. Pis, "CO2 capture by adsorption with nitrogen enriched carbons," Fuel, vol. 86, no. 14, pp. 2204-2212, 2007.
- Z.Yong, V. Mata, and A. E. Rodrigues, "Adsorption of carbon dioxide at high temperatureÔÇöA review," Sep. Purif. Technol., vol. 26, no. 2-3, pp. 195-205, 2002.
- A. Auroux, and A. Gervasini, "Microcalorimetric study of the acidity and basicity of metal oxide surfaces," J. Phys. Chem., vol. 94, no. 16, 6371-6379, 1990.
- P. K. Mehta, "Reducing the environmental impact of concrete," Concrete International, vol. 23, no. 10, pp. 61-66, 2001.
- W.H. Langer, Potential environmental impacts of quarrying stone in karstÔÇöA literature review. USGS Open-File Report of-01-0484. http://pubs.usgs.gov/ of/2001/ofr-01-0484/ofr-01-0484so.pdf, August 12, 2011.
- N. Nakatani, H. Takamori, K. Takeda, and H. Sakugawa, "Transesterification of soybean oil using combusted oyster shell waste as a catalyst", Bioresource Technol., vol. 100, no. 3, pp. 1510-1513, 2009.
- M. C. Barros, P. M. Bello, M. Bao, and J. J. Torrado, "From waste to commodity: transforming shells into high purity calcium carbonate", J Clean Prod., vol. 17, no. 3, pp. 400-407, 2009. [10] Y. Li, C. Zhou, H. Chen, L. Duan, and X. Chen, "CO2 capture behaviour of shell during calcination/ carbonation cycles", Chem Eng Technol., vol. 32, no. 8, pp. 1176-1182, 2009. [11] Boey, P., Maniam, G. P., Hamid, S. A., & Ali, D. M. H. "Utilization of waste cockle shell (anadara granosa) in biodiesel production from palm olein: Optimization using response surface methodology," Fuel, vol. 90, no. 7, pp. 2353-2358, 2011. [12] P. Sun, J. R. Grace, C. J. Lim, and E. J. Anthony, "Determination of intrinsic rate constant of the CaO-CO2 reaction," Chem. Eng. Sci., vol. 63, no.1, pp. 47-56, 2008. [13] R. Barker, "The reversibility of the reaction CaCO3 Ôåö CaO+CO2," Journal of Applied Chemistry and Biotechnology, vol. 23, pp. 733-742, 1973. [14] T. Hatakeyama and Z. Liu, Handbook of thermal analysis, John Wiley and Sons, England, 1998. [15] Z. Ye, W. Wang, Q. Zhong, and I. Bjerle, "High temperature desulfurization using fine sorbent particles under boiler injection conditions", Fuel, vol. 74, no. 5, pp. 743-750, 1995. [16] H. Gupta and L.S. Fan, "Carbonation-calcination cycle using high reactivity calcium oxide for carbon dioxide separation from flue gas," Ind. Eng. Chem. Res., vol. 41, no. 16, pp. 4035-4042, 2002. [17] B. R. Stanmore and P. Gilot, "ReviewÔÇöcalcination and carbonation of limestone during thermal cycling for CO2 sequestration," Fuel Process Technol., vol. 86, no. 16, pp. 1707-1743, 2005.