World Academy of Science, Engineering and Technology
Published October 24, 2012 | Version 14178
Journal article Open

Application of Nano Cutting Fluid under Minimum Quantity Lubrication (MQL) Technique to Improve Grinding of Ti – 6Al – 4V Alloy

Description

Minimum Quantity Lubrication (MQL) technique obtained a significant attention in machining processes to reduce environmental loads caused by usage of conventional cutting fluids. Recently nanofluids are finding an extensive application in the field of mechanical engineering because of their superior lubrication and heat dissipation characteristics. This paper investigates the use of a nanofluid under MQL mode to improve grinding characteristics of Ti-6Al-4V alloy. Taguchi-s experimental design technique has been used in the present investigation and a second order model has been established to predict grinding forces and surface roughness. Different concentrations of water based Al2O3 nanofluids were applied in the grinding operation through MQL setup developed in house and the results have been compared with those of conventional coolant and pure water. Experimental results showed that grinding forces reduced significantly when nano cutting fluid was used even at low concentration of the nano particles and surface finish has been found to improve with higher concentration of the nano particles.

Files

14178.pdf

Files (1.6 MB)

Name Size
md5:8027bfbf9511013601fc307472633a29
1.6 MB Preview Download

Additional details

References

  • I. D. Marinescu, W. B. Rowe, B. Dimitrov, and I. Inasaki, "6 - Thermal Design of Processes," in Tribology of Abrasive Machining Processes, ed Norwich, NY: William Andrew Publishing, 2004, pp. 177-238.
  • I. Inasaki, H. K. Tönshoff, and T. D. Howes, "Abrasive Machining in the Future," CIRP Annals - Manufacturing Technology, vol. 42, pp. 723- 732, 1993.
  • K. Weinert, I. Inasaki, J. W. Sutherland, and T. Wakabayashi, "Dry Machining and Minimum Quantity Lubrication," CIRP Annals - Manufacturing Technology, vol. 53, pp. 511-537, 2004.
  • T. Tawakoli, M. J. Hadad, M. H. Sadeghi, A. Daneshi, S. Stöckert, and A. Rasifard, "An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubricationÔÇöMQL grinding," International Journal of Machine Tools and Manufacture, vol. 49, pp. 924-932, 2009.
  • S. K. Das, S. U. S. Choi, and H. E. Patel, "Heat Transfer in NanofluidsÔÇöA Review," Heat Transfer Engineering, vol. 27, pp. 3-19, 2006/12/01 2006.
  • K.-H. Park, B. Ewald, and P. Y. Kwon, "Effect of Nano-Enhanced Lubricant in Minimum Quantity Lubrication Balling Milling," Journal of Tribology, vol. 133, pp. 031803-8, 2011.
  • B. Shen, A. Shih, and S. Tung, "Application of Nanofluids in Minimum Quantity Lubrication Grinding," ASME Conference Proceedings, vol. 2007, pp. 725-731, 2007.
  • Y. P. Y. Yunn Shiuan Liao, C.H. Chang, "Effects of Cutting Fluid with Nano Particles on the Grinding of Titanium Alloys," Advanced Materials Research, vol. 126 - 128, pp. 353-358, August, 2010.
  • P. Kalita, A. P. Malshe, and K. P. Rajurkar, "Study of tribo-chemical lubricant film formation during application of nanolubricants in minimum quantity lubrication (MQL) grinding," CIRP Annals - Manufacturing Technology, vol. 61, pp. 327-330, 2012. [10] J.-S. Kwak, "Application of Taguchi and response surface methodologies for geometric error in surface grinding process," International Journal of Machine Tools and Manufacture, vol. 45, pp. 327-334, 2005.