Published January 20, 2012
| Version 14177
Journal article
Open
Mathematical Modeling of Non-Isothermal Multi-Component Fluid Flow in Pipes Applying to Rapid Gas Decompression in Rich and Base Gases
Authors/Creators
Description
The paper presents a one-dimensional transient
mathematical model of compressible non-isothermal multicomponent
fluid mixture flow in a pipe. The set of the mass,
momentum and enthalpy conservation equations for gas phase is
solved in the model. Thermo-physical properties of multi-component
gas mixture are calculated by solving the Equation of State (EOS)
model. The Soave-Redlich-Kwong (SRK-EOS) model is chosen. Gas
mixture viscosity is calculated on the basis of the Lee-Gonzales-
Eakin (LGE) correlation. Numerical analysis of rapid gas
decompression process in rich and base natural gases is made on the
basis of the proposed mathematical model. The model is successfully
validated on the experimental data [1]. The proposed mathematical
model shows a very good agreement with the experimental data [1] in
a wide range of pressure values and predicts the decompression in
rich and base gas mixtures much better than analytical and
mathematical models, which are available from the open source
literature.
Files
14177.pdf
Additional details
References
- K.K. Botros, W. Studzinski, J. Geerligs, A. Glover, "Measurement of decompression wave speed in rich gas mixtures using a decompression tube," American Gas Association Proceedings -(AGA-2003), 2003.
- R.J. Eiber, T.A. Bubenik, W.A. Maxey, "Fracture control for natural gas pipelines," PRCI Report Number L51691, 1993.
- R.J. Eiber, L. Carlson, B. Leis, "Fracture control requirements for gas transmission pipelines," Proceedings of the Fourth International Conference on Pipeline Technology, p. 437, 2004.
- K.K. Botros, W. Studzinski, J. Geerligs, A. Glover, "Determination of decompression wave speed in rich gas mixtures," The Canadian Journal of Chemical Engineering, vol. 82, pp. 880-891, 2004.
- K.K. Botros, J. Geerligs, J. Zhou, A. Glover, "Measurements of flow parameters and decompression wave speed follow rapture of rich gas pipelines, and comparison with GASDECOM," International Journal of Pressure Vessels and Piping, vol. 84, pp. 358-367, 2007.
- K.K. Botros, J. Geerligs, R.J. Eiber, "Measurement of decompression wave speed in rich gas mixtures at high pressures (370 bars) using a specialized rupture tube," Journal of Pressure Vessel Technology, vol. 132, 051303-15, 2010.
- K.K. Botros, J. Geerligs, B. Rothwell, L. Carlson, L. Fletcher, P. Venton, "Transferability of decompression wave speed measured by a small-diameter shock tube to full size pipelines and implications for determining required fracture propagation resistance," International Journal of Pressure Vessels and Piping, vol. 87, pp. 681-695, 2010.
- GADECOM, Computer code for the calculation of gas decompression speed that is included in "Fracture Control Technology for Natural Gas Pipelines", by R.J. Eiber, T.A. Bubenik, W.A. Maxey, NG-18 report 208, AGA Catalog N L51691, 1993.
- K.H. Bendiksen, D. Maines, R. Moe, S. Nuland, "The Dynamic Two- Fluid Model OLGA: Theory and Application," SPE Production Eng., vol. 6, N 2, pp. 171-180, 1991. [10] G.B. Wallis, "One-dimensional two-phase flows," McGraw Hill, New York, 1969. [11] P.R.H. Blasius, "Das Aehnlichkeitsgesetz bei Reibungsvorgangen in Fluessigkeiten," Forschungsheft, vol. 131, pp. 1-41, 1913. [12] G. Soave, "Equilibrium constants from a modified Redlich-Kwong equation of state," Chemical Engineering Science, vol. 27, pp. 1197- 1203, 1979. [13] A.L. Lee, M.N. Gonzales, B.E. Eakin, "The viscosity of natural gases," Journal of Petroleum Technology, pp. 997-1000, 2010. [14] S. Patankar, "Numerical heat transfer and fluid flow," Hemisphere Publishing, New York, 1980.