Published July 24, 2012
| Version 13733
Journal article
Open
Dynamic Modeling and Simulation of Industrial Naphta Reforming Reactor
Authors/Creators
Description
This work investigated the steady state and dynamic
simulation of a fixed bed industrial naphtha reforming reactors. The
performance of the reactor was investigated using a heterogeneous
model. For process simulation, the differential equations are solved
using the 4th order Runge-Kutta method .The models were validated
against measured process data of an existing naphtha reforming plant.
The results of simulation in terms of components yields and
temperature of the outlet were in good agreement with empirical data.
The simple model displays a useful tool for dynamic simulation,
optimization and control of naphtha reforming.
Files
13733.pdf
Additional details
References
- V.A. Mazzieri, C.L. Pieck, C.R. Vera, J.C. Yori, J.M. Grau, Effect of Ge content on the metal and acid properties of Pt-Re-Ge-Al2O3-Cl catalysts for naphtha reforming. Applied Catalysis A: General, 353: 93-100, 2009.
- A.V. Sapre. Catalyst deactivation kinetics from variable space velocity experiments. Chemical Engineering Science, 52(24): 4615-4623, 1997.
- R.B. Smith, Kinetic analysis of naphtha reforming with platinum catalyst. Chem. Eng. Prog. 55(6): 76-80 (1959).
- J. Ancheyta, E. Villafuerte, P. Schachat, R. Aguilar, E. Gonzalez. Simulation of a commercial semiregenerative reforming plant using feedstocks with and without benzene precursors, Chem. Eng. Technol. 25(5): 541-546, 2002.
- M.R. Rahimpour, S. Esmaili, G.N.A. Bagheri, Kinetic and deactivation model for industrial catalytic naphtha reforming. Iran. J. Sci. Technol., Trans. B: Tech. 27: 279-290, 2003.
- J.W. Lee, Y.C. Ko, Y.K. Jung, K.S. Lee, E.S. Yoon, A modeling and simulation study on a naphtha reforming unit with catalyst circulation and regeneration system. Comput. Chem. Eng. 21: S1105-S1110, 1997.
- G. Padmavathi, K.K. Chaudhuri, Modeling and simulation of commercial catalytic naphtha reformers. Can. J. Chem. Eng., 75(10): 930-937, 1997.
- A. Khosravanipour Mostafazadeh, M.R. Rahimpour. A membrane catalytic bed concept for naphtha reforming in the presence of catalyst deactivation. Chemical Engineering and Processing: Process Intensification, 48: 683-694, 2009.
- M.Z. Stijepovic, A. Vojvodic-Ostojic, I. Milenkovic, P. Linke. Development of a kinetic model for catalytic reforming of naphtha and parameter estimation using industrial plant data. Energy & Fuels, 23: 979-983, 2009. [10] Kermanshah refinery Complex, "Operating data sheets of naphtha reforming plant", 2003-2008. [11] C.H. Bartholomew. Mechanisms of catalyst deactivation. Applied Catalysis A: General 212: 17-60, 2001. [12] R. Perry, D. Green, J. Maloney. Perry-s chemical engineers- handbook. 6th ed., New York: McGraw Hill, 1984. [13] S. Yagi, N. Wakao. Heat and mass transfer from wall to fluid in packed beds. AIChE .J 5(1): 79-85, 1959. [14] S. Chapra, R. Canale. Numerical Methods for Engineers. 6th ed., New York: McGraw Hill, 2010. [15] MATLAB, the Language of Technical Computing, Version 7.5. August 15, 2007, License Number: 34912, Copyright 1984-2007, the Math Works, Inc.