World Academy of Science, Engineering and Technology
Published March 27, 2012 | Version 13387
Journal article Open

Ground Heat Exchanger Modeling Developed for Energy Flows of an Incompressible Fluid

Description

Ground-source heat pumps achieve higher efficiencies than conventional air-source heat pumps because they exchange heat with the ground that is cooler in summer and hotter in winter than the air environment. Earth heat exchangers are essential parts of the ground-source heat pumps and the accurate prediction of their performance is of fundamental importance. This paper presents the development and validation of a numerical model through an incompressible fluid flow, for the simulation of energy and temperature changes in and around a U-tube borehole heat exchanger. The FlexPDE software is used to solve the resulting simultaneous equations that model the heat exchanger. The validated model (through a comparison with experimental data) is then used to extract conclusions on how various parameters like the U-tube diameter, the variation of the ground thermal conductivity and specific heat and the borehole filling material affect the temperature of the fluid.

Files

13387.pdf

Files (875.6 kB)

Name Size
md5:636d7b6f3ad86a67e0c4c4ba263b0f93
875.6 kB Preview Download

Additional details

References

  • H. S. Carslaw and J. C. Jaeger, Conduction of heat in solids, Claremore Press, Oxford, 1946.
  • V. C. Mei and C. J. Emerson, "New approach for analysis of groundcoil design for applied heat pump systems," ASHRAE Transactions 91(2B), 1985, pp. 1216-1224.
  • J. D. Deerman and S. P. Kavanaugh, "Simulation of vertical U-tube ground coupled heat pump systems using the cylindrical heat source solution," ASHRAE Transactions 97(1), 1991, pp. 287-295.
  • C. Yavuzturk, J. D. Spitler and S.J. Rees, "A Transient two-dimensional finite volume model for the simulation of vertical U-tube ground heat exchangers," ASHRAE Transactions 105(2), 1999, pp. 465-474.
  • Y. Nam, R. Ookaa and S. Hwanga, "Development of a numerical model to predict heat exchange rates for a ground-source heat pump system," Energy and Buildings 40(12), 2008, pp. 2133-2140.
  • P. Cui, H. Yang and Z. Fang, "Numerical analysis and experimental validation of heat transfer in ground heat exchangers in alternative operation modes," Energy and Buildings 40(6), 2008, pp. 1060-1066.
  • L. Schiavi, "3D Simulation of the Thermal Response Test in a U-tube Borehole Heat Exchanger," in Proc. COMSOL Conference, Milan, 2009. On line: http://cds.comsol.com/access/dl/papers/6825/Schiavi.pdf
  • J. C. Heinrich and D. W. Pepper, Intermediate finite element method: Fluid flow and heat transfer applications, Taylor & Francis, Philadelphia, PA, 1999.
  • G. Florides and S. Kalogirou, "First in situ determination of the thermal performance of a U-pipe borehole heat exchanger in Cyprus," Applied Thermal Engineering 28(2-3), 2008, pp. 157-163.