World Academy of Science, Engineering and Technology
Published July 23, 2011 | Version 11858
Journal article Open

Roughness Effects on Nucleate Pool Boiling of R-113 on Horizontal Circular Copper Surfaces

Authors/Creators

Description

The present paper is an experimental investigation of roughness effects on nucleate pool boiling of refrigerant R113 on horizontal circular copper surfaces. The copper samples were treated by different sand paper grit sizes to achieve different surface roughness. The average surface roughness of the four samples was 0.901, 0.735, 0.65, and 0.09, respectively. The experiments were performed in the heat flux range of 8 to 200kW/m2. The heat transfer coefficient was calculated by measuring wall superheat of the samples and the input heat flux. The results show significant improvement of heat transfer coefficient as the surface roughness is increased. It is found that the heat transfer coefficient of the sample with Ra=0.901 is 3.4, 10.5, and 38.5% higher in comparison with surfaces with Ra of 0.735, 0.65, and 0.09 at heat flux of 170 kW/m2. Moreover, the results are compared with literature data and the well known Cooper correlation.

Files

11858.pdf

Files (248.0 kB)

Name Size Download all
md5:19194bf1ad29e2b1bcb12b3dc566f70a
248.0 kB Preview Download

Additional details

References

  • G. Ribatski, and J. M. S. Jabardo, "Experimental Study of Nucleate Boiling of Halocarbon Refrigerants on Cylindrical Surfaces," Int. J. Heat Mass Transfer vol. 46, pp. 4439-4451, 2003.
  • V. K. Dhir, "Nucleate and Transition Boiling Heat Transfer under Pool and External Flow Conditions," Int. J.Heat Fluid Flow, vol. 12, pp. 290- 314, 1991.
  • I. L. Pioro, W. Rohsenow, and S. S. Doerffer, "Nucleate Pool-Boiling Heat Transfer. I: Review of Parametric Effects of Boiling Surface," Int. J. Heat Mass Transfer vol. 47, pp. 5033-5044, 2004.
  • P. J. Marto, and W. M. Rohsenow, "Effects of Surface Conditions on Nucleate Pool Boiling of Sodium," ASME Journal of Heat Transfer, vol. 88, pp. 196-204, 1966.
  • J. T. Cieslinski, "Nucleate Pool Boiling on Porous Metallic Coatings," Experimental Thermal and Fluid Science, vol. 25, pp. 557-564, 2002.
  • S. Chatpun, M. Watanabe, and M. Shoji, "Experimental Study on Characteristics of Nucleate Pool Boiling by the Effects of Cavity Arrangement," Experimental Thermal and Fluid Science, vol. 29, pp. 33- 40, 2004.
  • S. Chatpun, M. Watanabe, and M. Shoji, "Nucleation Site Interaction in Pool Nucleate Boiling on a Heated Surface with Triple Artificial Cavities," International Journal of Heat and Mass Transfer, vol. 47, pp. 3583-3587, 2004.
  • A. K. Das, P. K. Das, and P. Saha, "Nucleate Boiling of Water from Plain and Structured Surfaces," Experimental Thermal and Fluid Science, vol. 31, pp. 967-977, 2007.
  • P. J. Berenson, "Experiments on Pool-Boiling Heat Transfer," Int. J. Heat Mass Transfer vol. 5, pp. 985-999, 1962. [10] S. K. Roy Chowdhury, and R. H. S. Winterton, "Surface Effects in Pool Boiling," Int. J. Heat Mass Transfer vol. 28, pp. 1881-1889, 1985. [11] D. Gorenflo, U. Chandra, S. Kotthoff, and A. Luke, "Influence of Thermophysical Properties on Pool Boiling Heat Transfer of Refrigerants," Int. J. Refrig, vol. 27, pp. 492-502, 2004. [12] R. J. Benjamin, and A. R. Balakrishnan, "Nucleate Pool Boiling Heat Transfer of Pure Liquids at Low to Moderate Heat Fluxes," Int. J. Heat Mass Transfer vol. 39, pp. 2495-2504, 1996. [13] M.-G. Kang, "Effect of Surface Roughness on Pool Boiling Heat Transfer," Int. J. Heat Mass Transfer vol. 43, pp. 4073-4085, 2000. [14] J. M. S. Jabardo, G. Ribatski, and E. Stelute, "Roughness and Surface Material Effects on Nucleate Boiling Heat Transfer from Cylindrical Surfaces to Refrigerants R-134a and R-123," Exp. Therm. Fluid Sci., vol. 33, pp. 579-590, 2009. [15] E. A. Farber, and E. L. Scorah, "Heat Transfer to Water Boiling under Pressure," Trans. ASME, vol. 70, pp. 369-384, 1948. [16] S. T. Hsu, and F. W. Schmidt, "Measured Variations in Local Surface Temperatures in Pool Boiling of Water," J. Heat Transfer, vol. 83, pp. 254-260, 1961. [17] S. K. R. Chowdhury, and R. H. S. Winterton, "Surface Effects in Pool Boiling," Int. J. Heat Mass Transfer, vol. 10, pp. 1881-1889, 1985. [18] S. Kline, and F. Mcclintock, "Describing Uncertainties in Single-Sample Experiments," Mech Eng, vol. 75, pp. 3-8, 1953. [19] R. Hosseini, A. Gholaminejad, M. Nabil, and M. H. Samadinia, "Concerning the Effect of Surface Material on Nucleate Boiling Heat Transfer of R-113," ASME Conference Proceedings, vol. 2011, pp. T10238-T10238-6, 2011. [20] A. Gholaminejad, R. Hosseini, M. Nabil, and M. H. Samadinia, "A Pool Boiling Cooling Device," Iranian Department of Industrial Ownership, Ref. No. 68033, Dec. 2010. [21] M. G. Cooper, 1984, Advances in Heat Transfer, Elsevier, Heat Flow Rates in Saturated Nucleate Pool Boiling-a Wide-Ranging Examination Using Reduced Properties.