Published February 27, 2024
| Version v4
Dataset
Open
Data and Software for Developing a General Comprehensive Evaluation Method for Cross-Scale Precipitation Forecasts
Authors/Creators
- 1. Key Laboratory of Transportation Meteorology of China Meteorological Administration, Nanjing Joint Institute for Atmospheric Sciences, Nanjing 210041, China
- 2. School of Atmospheric Sciences, Nanjing University, Nanjing, China
- 3. School of Atmospheric Science, Nanjing University of Information Science & Technology, Nanjing, China
- 4. Joint Center of Data Assimilation Research and Applications, Nanjing University of Information Science & Technology, Nanjing 210044, China
- 5. National Meteorological Center, Beijing, China
Description
Readme for GCEM Data and Code
1 The data and code of two typical cases in Section 4.1
1.1 Data
1.1.1 Observed Precipitation Data
1.1.1.1 /DataSoftware/1_Two_Typical_Processes/01Observed_precipitation_data/2019071612
Hourly precipitation from 00:00 to 12:00 UTC on July 16, 2019 for Case 1
surfr01h.nc
surfr02h.nc
surfr03h.nc
surfr04h.nc
surfr05h.nc
surfr06h.nc
surfr07h.nc
surfr08h.nc
surfr09h.nc
surfr10h.nc
surfr11h.nc
surfr12h.nc
1.1.1.2 /DataSoftware/1_Two_Typical_Processes/01Observed_precipitation_data/2020061312
Hourly precipitation from 00:00 to 12:00 UTC on June 13,2020 for Case 2
surfr01h.nc
surfr02h.nc
surfr03h.nc
surfr04h.nc
surfr05h.nc
surfr06h.nc
surfr07h.nc
surfr08h.nc
surfr09h.nc
surfr10h.nc
surfr11h.nc
surfr12h.nc
1.1.2 Forecasted Precipitation Data
1.1.2.1 /DataSoftware/1_Two_Typical_Processes/02Forecasted_precipitation_data/2019071612
Data for Case 1 during 00:00-12:00 UTC on July 16, 2019
WRF3.2019071600000.nc (initial field at 12:00 UTC on July 16, 2019)
WRF3.2019071600012.nc (12-hour accumulated precipitation during 00:00–12:00 UTC on July 16, 2019)
1.1.2.2 /DataSoftware/1_Two_Typical_Processes/02Forecasted_precipitation_data/2020061312
Data for Case 2 during 00:00-12:00 UTC on June 13,2020
WRF3.2020061300000.nc (initial field at 12:00 UTC on June 13,2020)
WRF3.2020061300012.nc (12-hour accumulated precipitation during 00:00–12:00 UTC on June 13,2020)
1.2 Code and Configuration Files
1.2.1 GCEM of grid precipitation forecast data (/DataSoftware/1_Two_Typical_Processes/03Software_Configuration_Results_of_GCEM)
pastonc6hd2.f90 Main program, reads observed and forecasted precipitation data, performs GCEM verification, and outputs result files.
module_skinput.f90 Subprogram, module for reading one or more observed precipitation grid file
module_ybinput.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
mod_uxpasid2.f90 Subprogram, module for used to perform GCEM verification on forecasted data
module_outnc.f90 Subprogram, module for outputting the verification results in netCDF file format
compilePAS10mmd2.sh Used to compile source files to generate executable file under Linux
r12hfile.txt Configuration file, used to specify the latitude and longitude range for data source and verification
pastonc6hd2.exe Executable file
1.2.2 TS of grid precipitation forecast data (/DataSoftware/1_Two_Typical_Processes/04Software_Configuration_Results_of_TS-Score)
tsmain01.f90 Main program, reads observed and forecasted precipitation data, performs TS verification, and outputs result files.
module_skinput.f90 Subprogram, module for reading one or more observed precipitation grid file module_ybinput.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_uxtsiTure.f90 Subprogram, module for used to perform TS verification on forecasted data
compileTS.sh Used to compile source files to generate executable file under Linux
r12hfile.txt Configuration file, used to specify the latitude and longitude range for data source and verification
tsmain01.exe Executable file
1.3 Output files
1.3.1 GCEM verification results (/DataSoftware/1_Two_Typical_Processes/03Software_Configuration_Results_of_GCEM/Results_GCEM)
rainverd2019071612012.nc Result file in netCDF format
rainverd2019071612012.nc.txt Result explanation file in netCDF format
rainverd2020061312012.nc Result file in netCDF format
rainverd2020061312012.nc.txt Result explanation file in netCDF format
1.3.2 TS verification results (/DataSoftware/1_Two_Typical_Processes/04Software_Configuration_Results_of_TS-Score/Results_TS)
ts12h2019071612.txt TS result file in text format
ts12h2020061312.txt TS result file in text format
1.4 Compiling Environment
The verification program runs in a UNIX environment and requires the intel compiler (v2017) and the netCDF (v4.6.1) support library
UNIX Environment Settings
# .bashrc
module load intel/intel-compiler-2017.5.239
module load intelmpi/2019.6.154
export F90=ifort
export NETCDF=/public/software/mathlib/netcdf/4.6.1_intel-2017_mpi-2017_hdf5-1.8.20-intel2017
export NETCDF_LIB=$NETCDF/lib
export NETCDF_INC=$NETCDF/include
export PATH=$NETCDF/bin:$PATH
export LD_LIBRARY_PATH=$NETCDF/lib:$LD_LIBRARY_PATH
1.5 Compiling and Running Steps
1.5.1 The steps for case 1 during 00:00–12:00 UTC on July 16, 2019
1. Creating an installation and running sub-directory
mkdir p2019
2. Copying data sources, code files and configuration files to this directory
3. Running in this directory
./compilePAS10mmd2.sh Compile to generate executable file (pastonc6hd2.exe)
./compileTS.sh Compile to generate executable file (tsmain01.exe)
4. Modifying the configuration file (r12hfile.txt)
Mainly modifying the data source path for lines 4, 19, and 23
5. Run the executable files
./pastonc6hd2.exe > outnc12hd22019071612.txt
Creating the GCEM result file (rainverd2019071612012.nc), procedure file (outnc12hd22019071612.txt)
./tsmain01.exe >ts12h2019071612.txt
Creating the TS result and procedure file (ts12h2019071612.txt)
1.5.2 The steps for case 2 during 00:00–12:00 UTC on June 13,2020
1. Creating an installation and running sub-directory
mkdir p2020
2. Copying data sources, code files and configuration files to this directory
3. Running in this directory
./compilePAS10mmd2.sh Compile to generate executable file (pastonc6hd2.exe)
./compileTS.sh Compile to generate executable file (tsmain01.exe)
4. Modifying the configuration file (r12hfile.txt)
Mainly modifying the data source path for lines 4, 19, and 23
5. Run the executable files
./pastonc6hd2.exe > outnc12hd22020061312.txt
Creating the GCEM result file (rainverd2020061312012.nc), procedure file (outnc12hd22020061312.txt)
./tsmain01.exe >ts12h2020061312.txt
Creating the TS result and procedure file (ts12h2019071612.txt)
1.6 Module code main interface description
1.6.1 skinput()
subroutine skinput(skfile,skfilenum,rain,gridskx,gridsky,longitude,latitude)
integer,intent(in) :: skfilenum
character(len=200),dimension(skfilenum),intent(in) :: skfile
real,dimension(:,:),allocatable,intent(out) :: rain
integer,intent(out) :: gridskx,gridsky
usage: Read a set of observed precipitation data files and output grid accumulated precipitation
skfile, A set of filenames that are arrays of strings (input)
skfilenum, Number of files (input)
rain, Accumulated precipitation, rain(nx,ny) (output)
gridskx, grid points, nx (output)
gridsky, grid points, ny (output)
gridlon, Longitude array, gridlon(nx) (output)
gridlat, Latitude array, gridlat(ny) (output)
1.6.2 ybinput()
subroutine ybinput(ybfile,apcp,gridybx,gridyby,gridyblon,gridyblat)
character(len=200),intent(in) :: ybfile
real,dimension(:,:),allocatable,intent(out) :: apcp,gridyblat,gridyblon
integer,intent(out) :: gridybx,gridyby
usage: Read a set of forecasted precipitation data files and output forecast grid precipitation
ybfile, Forecast file (input)
apcp, forecasted precipitation array, apcp(nx, ny) (output)
gridybx, Number of grid points for forecast data, nx (output)
gridyby, Number of grid points for forecast data, ny (output)
gridyblon, Longitude of forecast data, gridyblon(nx, ny) (output)
gridyblat, Latitude of forecast data, gridyblat(nx, ny) (output)
1.6.3 uxpasid2()
subroutine uxpasid2(ui,xi,level,pas,iTure,iclass,ieps)
real,intent(in) :: ui,xi,level
real,intent(out) :: pas,ieps
integer,intent(out) :: iTure,iclass
usage: Read in the observed and forecasted precipitation, and output the PAS score result
rainsk, Observed precipitation (input)
rainyb, Forecasted precipitation (input)
level, Specifing magnitude (input)
ipas, Pas score value (0-1) or correct value of no precipitation forecast (1)
iTure, 0 indicates that the rating is correct for a no precipitation forecast;
1 indicates a PAS score of ≥ the specified magnitude;
9 indicates that it is not in the no precipitation test, nor is it the verification the specified magnitude;
-999 indicates default.
iclass, 0 indicates the category (no precipitation forecast is correct)
1 indicates the category of insufficient precipitation forecast (observation u<10mm)
2 indicates the category of excessive(or equal) precipitation forecast(observation u<10mm)
3 indicates the category of insufficient precipitation forecast (observation u≥10mm)
4 indicates the category of excessive(or equal) precipitation forecast(observation u≥10mm)
-999 indicates default.
ieps, 0 indicates the forecasted and observed precipitation are equal
<0 indicates insufficient precipitation forecast
>0 indicates excessive precipitation forecast
-999 indicates default.
1.6.4 outpasnc()
subroutine outpasnc(title,vtime,vhour,gridncx,gridncy,gridnclon,gridnclat,rainncsk,rainncyb,&
pasc,pas01,pas10,pas25,pas50, pas2p5,pas5,pas15, pascnc,pasnc01,pasnc10,&
pasnc25,pasnc50,pasnc2p5,pasnc5,pasnc15,ipsnc,epsnc,iepsnc,ips,eps,ieps)
character(len=10),intent(in) :: vtime,title
integer,intent(in) :: vhour,gridncx,gridncy
character(len=10) :: chour
real,dimension(gridncx),intent(in) :: gridnclon
real,dimension(gridncy),intent(in) :: gridnclat
real,dimension(gridncx,gridncy),intent(in) :: rainncsk,rainncyb,pascnc,pasnc01
real,dimension(gridncx,gridncy),intent(in) :: pasnc10,pasnc25,pasnc50,ipsnc,epsnc,iepsnc
real,dimension(gridncx,gridncy),intent(in) ::pasnc2p5,pasnc5,pasnc15
real,intent(in) :: pasc,pas01,pas10,pas25,pas50,ips,eps,ieps,pas2p5,pas5,pas15
usage: Output data to a netCDF format file
title, File name tag (d)
vtime, time string (yyyymmdddhh, eg. 2019071612)
vhour, Accumulated precipitation duration (12)
gridncx, x grid points (240)
gridncy, y grid points (200)
gridnclon, x grid points longitude array
gridnclat, y grid points latitude array
rainncsk, Observed precipitation
rainncyb, Forecasted precipitation
pasc, PASC
pas01, ≥0.1mm PAS
pas10, ≥10mm PAS
pas25, ≥25mm PAS
pas50, ≥50mm PAS
pas2p5, ≥2.5mm PAS
pas5, ≥5mm PAS
pas15, ≥15mm PAS
pascnc, PASC array
pasnc01, ≥0.1mm PAS array
pasnc10, ≥10mm PAS array
pasnc25, ≥25mm PAS array
pasnc50, ≥50mm PAS array
pasnc2p5, ≥2.5mm PAS array
pasnc5, ≥5mm PAS array
pasnc15, ≥15mm PAS array
ipsnc, IPS array
epsnc, EPS array
iepsnc, IEPS array
ips, IPS
eps, EPS
ieps IEPS
2 The data and code of extreme rainfall event in Section 4.2
2.1 Data
2.1.1 Observed Precipitation Data (/DataSoftware/2_extreme_rainfall_event_data/01Observed_precipitation_data)
CMPAday-2021072100UTC.nc
CMPAday-2021072200UTC.nc
2.1.2 Forecasted Precipitation Data
2.1.2.1 /DataSoftware/2_extreme_rainfall_event_data/02Forecasted_precipitation_data/PWAFS
wrfout_2021071812012.nc (initial field at 12:00 UTC on 18 July 2021, with forecast time of 12 hours)
wrfout_2021071812036.nc (initial field at 12:00 UTC on 18 July 2021, with forecast time of 36 hours)
wrfout_2021071912012.nc (initial field at 12:00 UTC on 19 July 2021, with forecast time of 12 hours)
wrfout_2021071912036.nc (initial field at 12:00 UTC on 19 July 2021, with forecast time of 36 hours)
wrfout_2021072012012.nc (initial field at 12:00 UTC on 20 July 2021, with forecast time of 12 hours)
wrfout_2021072012036.nc (initial field at 12:00 UTC on 20 July 2021, with forecast time of 36 hours)
2.1.2.2 /DataSoftware/2_extreme_rainfall_event_data/02Forecasted_precipitation_data/GRAPES
GRAPES2021071812012.nc (initial field at 12:00 UTC on 18 July 2021, with forecast time of 12 hours)
GRAPES2021071812036.nc (initial field at 12:00 UTC on 18 July 2021, with forecast time of 36 hours)
GRAPES2021071912012.nc (initial field at 12:00 UTC on 19 July 2021, with forecast time of 12 hours)
GRAPES2021071912036.nc (initial field at 12:00 UTC on 19 July 2021, with forecast time of 36 hours)
GRAPES2021072012012.nc (initial field at 12:00 UTC on 20 July 2021, with forecast time of 12 hours)
GRAPES2021072012036.nc (initial field at 12:00 UTC on 20 July 2021, with forecast time of 36 hours)
2.2 Code and Configuration Files
2.2.1 PAS of Software and Configuration (/DataSoftware/2_extreme_rainfall_event_data/03Software_Configuration_Results_of_PAS)
pasmain250mm.f90 Main program, reads observed and forecasted precipitation data, performs GCEM verification, and outputs result files.
pasgmain250mm.f90 Main program, reads observed and forecasted precipitation data, performs GCEM verification, and outputs result files.
module_skinput.f90 Subprogram, module for reading one or more observed precipitation grid file
module_ybinput.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_ybinputGrapes.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
mod_uxpasid2.f90 Subprogram, module for used to perform GCEM verification on forecasted data
module_outnc.f90 Subprogram, module for outputting the verification results in netCDF file format
compilePAS250mm.sh Used to compile source files to generate executable file under Linux
compileGrapesPAS250mm.sh Used to compile source files to generate executable file under Linux
r12hfilePWAFS2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
pasmain250mm.exe Executable file
pasgmain250mm.exe Executable file
2.2.2 TS of Software and Configuration /DataSoftware/2_extreme_rainfall_event_data/04Software_Configuration_Results_of_TS)
tsmain250mm.f90 Main program, reads observed and forecasted precipitation data, performs TS verification, and outputs result files.
tsgmain250mm.f90 Main program, reads observed and forecasted precipitation data, performs TS verification, and outputs result files.
module_skinput.f90 Subprogram, module for reading one or more observed precipitation grid file
module_ybinput.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_ybinputGrapes.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_uxtsiTure.f90 Subprogram, module for used to perform TS verification on forecasted data
compileTS250mm.sh Used to compile source files to generate executable file under Linux
compileGrapesTS250mm.sh Used to compile source files to generate executable file under Linux
r12hfilePWAFS2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
tsmain250mm.exe Executable file
tsgmain250mm.exe Executable file
2.2.3 FSS of Software and Configuration (/DataSoftware/2_extreme_rainfall_event_data/05Software_Configuration_Results_of_FSS)
fssmain250mm.exe Main program, reads observed and forecasted precipitation data, performs TS verification, and outputs result files.
fssgmain250mm.f90 Main program, reads observed and forecasted precipitation data, performs TS verification, and outputs result files.
module_skinput.f90 Subprogram, module for reading one or more observed precipitation grid file
module_ybinput.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_ybinputGrapes.f90 Subprogram, module for reading the start (or end) forecasted precipitation grid file
module_FSSom.f90 Subprogram, module for used to perform FSS verification on forecasted data
compilefss250mm.sh Used to compile source files to generate executable file under Linux
compileGrapesfss250mm.sh Used to compile source files to generate executable file under Linux
r12hfilePWAFS2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfilePWAFS2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071812036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021071912036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
r12hfileGRAPES2021072012036-12.txt Configuration file, used to specify the latitude and longitude range for data source and verification
fssmain250mm.exe Executable file
fssgmain250mm.exe Executable file
2.3 Output files
2.3.1 GCEM verification results (/DataSoftware/2_extreme_rainfall_event_data/03Software_Configuration_Results_of_PAS/ Results)
rainverd2021072000001.nc Result file in netCDF format
rainverd2021072000001.nc.txt Result explanation file in netCDF format
rainverd2021072100001.nc Result file in netCDF format
rainverd2021072100001.nc.txt Result explanation file in netCDF format
rainverd2021072200001.nc Result file in netCDF format
rainverd2021072200001.nc.txt Result explanation file in netCDF format
outnc22021072000_250mm.txt GCEM result file in text format
outnc22021072100_250mm.txt GCEM result file in text format
outnc22021072200_250mm.txt GCEM result file in text format
rainverg2021072000001.nc Result file in netCDF format
rainverg2021072000001.nc.txt Result explanation file in netCDF format
rainverg2021072100001.nc Result file in netCDF format
rainverg2021072100001.nc.txt Result explanation file in netCDF format
rainverg2021072200001.nc Result file in netCDF format
rainverg2021072200001.nc.txt Result explanation file in netCDF format
outgnc22021072000_250mm.txt GCEM result file in text format
outgnc22021072100_250mm.txt GCEM result file in text format
outgnc22021072200_250mm.txt GCEM result file in text format
2.3.2 TS verification results (/DataSoftware/2_extreme_rainfall_event_data/04Software_Configuration_Results_of_TS/Results)
ts2021072000_24h250mm.txt TS result file in text format
ts2021072100_24h250mm.txt TS result file in text format
ts2021072200_24h250mm.txt TS result file in text format
tsg2021072000_24h250mm.txt TS result file in text format
tsg2021072100_24h250mm.txt TS result file in text format
tsg2021072200_24h250mm.txt TS result file in text format
2.3.3 FSS verification results (/DataSoftware/2_extreme_rainfall_event_data/05Software_Configuration_Results_of_FSS/Results)
fss2021072000_24h250mm.txt TS result file in text format
fss2021072100_24h250mm.txt TS result file in text format
fss2021072200_24h250mm.txt TS result file in text format
fssg2021072000_24h250mm.txt TS result file in text format
fssg2021072100_24h250mm.txt TS result file in text format
fssg2021072200_24h250mm.txt TS result file in text format
2.4 Compiling Environment
The verification program runs in a UNIX environment and requires the intel compiler (v2017) and the netCDF (v4.6.1) support library
UNIX Environment Settings
# .bashrc
module load intel/intel-compiler-2017.5.239
module load intelmpi/2019.6.154
export F90=ifort
export NETCDF=/public/software/mathlib/netcdf/4.6.1_intel-2017_mpi-2017_hdf5-1.8.20-intel2017
export NETCDF_LIB=$NETCDF/lib
export NETCDF_INC=$NETCDF/include
export PATH=$NETCDF/bin:$PATH
export LD_LIBRARY_PATH=$NETCDF/lib:$LD_LIBRARY_PATH
2.5 Compiling and Running Steps
2.5.1 Creating an installation and running sub-directory
mkdir zzby
2.5.2 Copying data sources, code files and configuration files to this directory
2.5.3 Running in this directory
./compilePAS250mm.sh Compile to generate executable file (pasmain250mm.exe)
./compileGrapesPAS250mm.sh Compile to generate executable file (pasgmain250mm.exe)
./compileTS250mm.sh Compile to generate executable file (tsmain250mm.exe)
./compileGrapesTS250mm.sh Compile to generate executable file (tsgmain250mm.exe)
./compilefss250mm.sh Compile to generate executable file (fssmain250mm.exe)
./compileGrapesfss250mm.sh Compile to generate executable file (fssgmain250mm.exe)
2.5.4 Modifying the configuration file (r12hfile.txt)
Link Configuration file to r12hfile.txt
Mainly modifying the data sources
2.5.5 Run the executable files
Link different configuration files, and run executable files, then output different results.
Creating the GCEM result and procedure files
./ pasmain250mm.exe > outnc22021072000_250mm.txt
./ pasmain250mm.exe > outnc22021072100_250mm.txt
./ pasmain250mm.exe > outnc22021072200_250mm.txt
./pasgmain250mm.exe > outgnc22021072000_250mm.txt
./pasgmain250mm.exe > outgnc22021072100_250mm.txt
./pasgmain250mm.exe > outgnc22021072200_250mm.txt
Creating the TS result and procedure files
./tsmain250mm.exe > ts2021072000_24h250mm.txt
./tsmain250mm.exe > ts2021072100_24h250mm.txt
./tsmain250mm.exe > ts2021072200_24h250mm.txt
./tsgmain250mm.exe > tsg2021072000_24h250mm.txt
./tsgmain250mm.exe > tsg2021072100_24h250mm.txt
./tsgmain250mm.exe > tsg2021072200_24h250mm.txt
Creating the FSS result and procedure files
./fssmain250mm.exe >fss2021072000_24h250mm.txt
./fssmain250mm.exe >fss2021072100_24h250mm.txt
./fssmain250mm.exe >fss2021072200_24h250mm.txt
./fssgmain250mm.exe >fssg2021072000_24h250mm.txt
./fssgmain250mm.exe >fssg2021072100_24h250mm.txt
./fssgmain250mm.exe >fssg2021072200_24h250mm.txt
3 PAS mini-program
3.1 Code for PAS mini-program (/DataSoftware/3_Software_of_PAS)
pas10ux.f90 Main program, used to perform PAS verification on single point precipitation forecast
mod_uxpasid2.f90 Subprogram, Module for PAS of single point forecast
compilePAS10ux.sh Used to compile source files to generate executable file under Linux
pas10ux.exe Executable file
3.2 The steps for PAS mini-program
1. Creating an installation and running sub-directory
mkdir pas
2. Copying code files and configuration files to this directory
3. Running in this directory
./compilePAS10ux.sh Compile to generate executable file (pastonc6hd2.exe)
4. linking the executable file as pas
ln -sf pas10ux.exe pas
5. Running the PAS mini-program
for example: ./pas 15 20
Parameter 1: 15 represents observed precipitation
Parameter 2: 20 represents forecasted precipitation
Output: 0.895 1
The following instructions for specific usage:
pas rainsk rainyb [level]
Input parameters
Parameter 1 (rainsk): observed precipitation (mm)
Parameter 2 (rainyb): forecasted precipitation (mm)
Parameter 3 (level): Specifing magnitude (Optional, default to ≥0.1mm)
Onput parameters
Parameter 1 (ipas): Pas score value (0-1) or correct value of no precipitation forecast (1);
-999.000 represents default.
Parameter 2 (iTure):
0 indicates that the rating is correct for a no precipitation forecast;
1 indicates a PAS score of ≥ the specified magnitude;
9 indicates that it is not in the no precipitation test, nor is it the verification the specified magnitude;
-999 indicates default.
4 PAS animation
/DataSoftware/4_Animation_PAS
PASscore.gif
5 Figures of the manuscript
/DataSoftware/5_Figures_for_manuscript
Figure01, Figure02, Figure03, Figure04, Figure05, Figure06, Figure07, Figure08, Figure09, Figure10 and Figure11 file folders
Files
Files
(6.4 GB)
| Name | Size | Download all |
|---|---|---|
|
md5:2836b617ee72aacffb949c8a001b5360
|
2.1 GB | Download |
|
md5:0cac52f446a3043c95248aac1a5c0d5f
|
2.1 GB | Download |
|
md5:d146f0e06b8d17f34ced68742c8a1f19
|
2.1 GB | Download |