Published December 20, 2011
| Version 2498
Journal article
Open
Fuzzy Controlled Hydraulic Excavator with Model Parameter Uncertainty
Authors/Creators
Description
The hydraulic actuated excavator, being a non-linear
mobile machine, encounters many uncertainties. There are
uncertainties in the hydraulic system in addition to the uncertain
nature of the load. The simulation results obtained in this study show
that there is a need for intelligent control of such machines and in
particular interval type-2 fuzzy controller is most suitable for
minimizing the position error of a typical excavator-s bucket under
load variations. We consider the model parameter uncertainties such
as hydraulic fluid leakage and friction. These are uncertainties which
also depend up on the temperature and alter bulk modulus and
viscosity of the hydraulic fluid. Such uncertainties together with the
load variations cause chattering of the bucket position. The interval
type-2 fuzzy controller effectively eliminates the chattering and
manages to control the end-effecter (bucket) position with positional
error in the order of few millimeters.
Files
2498.pdf
Additional details
References
- J. Y. Alaydi, "Mathematical modeling for pump controlled system of hydraulic drive unit of single bucket excavator digging mechanism," Jordan Journal of Mechanical and Industrial Engineering, vol. 2, no. 3, pp. 157-162, Sep. 2008.
- B. Yao, F. Bu, and G. T. C. Chiu, "Nonlinear adaptive robust control of electro-hydraulic servo system with discontinuous projections," Proceedings of the 37th IEEE Conference on Decision & Control, USA, Dec. 1998, pp. 2265-2270.
- S. Tafazoli, C. W. De Dilva, and P. D. Lawrence, "Tracking control of an electrohydraulic manipulator in the presence of friction," IEEE Transaction on Control Systems Technology, vol. 6, no. 3, pp. 401-411, May 1998.
- J. Shao, L. Chen, Y. Ji, and Z. Sun, "The Application of fuzzy control strategy in electro-hydraulic servo system," Proceeding of International Symposium on Communications and Information Technologies (ISCIT2005), China, 2005, pp. 159-164.
- H. Q. Nguyen, "Robot low level control of robotic excavation," Ph. D. thesis, University of Sydney, Australia, 2000.
- X. Zong-Yi, G. Qiang, J. Li-Min, and W. Ying-Yin, "Modelling and identification of hydraulic system and its application," Proceedings of the 17th World Congress: The International Federation of Automatic Control, Seoul-Korea, July 2008, pp. 6446-6451.
- M. Muvengei and J. Kihiu, "Bond graph modelling of mechanical dynamics of an excavator for hydraulic system analysis and design," International Journal of Mechanical, Industrial and Aerospace Engineering, vol. 3, no. 4, pp. 248-256, 2009.
- Y. Liu, S. M. Hasan, and H-N. Yul, "Modelling and remote control of an excavator," International Journal of Automation and Computing, vol. 7, no. 3, pp. 349-358, Aug. 2010.
- G. Kothapalli and M. Y. Hassan, "Design of a neural network based intelligent PI controller for a pneumatic system," IAENG International Journal of Computer Science, vol. 35, no. 2, 2008. [10] B. Li, Y. Jun, G. Gang, Z. Yonghua and, L. Wenxing, "High performance control of hydraulic excavator based on fuzzy-PI softswitch controller," IEEE International Conference on Computer Science and Automation, China, June 2011, pp. 676-679. [11] J. M. Mendel, Uncertain rule-based fuzzy logic systems: Introduction and new directions, NJ: Prentice Hall PTR, 2001. [12] M. B. Ozek, and Z. H. Akpolat, "A Software tool: Type-2 fuzzy logic toolbox," Computer Application in Engineering Education, 2008, vol. 16, no. 2, pp. 137-146, 2008. [13] E. Qugli, I. Lagrat, and I. Boumhidi, "A Type-2 fuzzy adaptive controller of a class of nonlinear system," International Journal of Computational Intelligence, vol. 4, no. 4, pp. 282-288, 2008. [14] R. Martínez, O. Castillo, and L. T. Aguilar, "Intelligent control for a perturbed autonomous wheeled mobile robot using Type-2 fuzzy logic and genetic algorithm," Journal of Automation, Mobile Robotics Intelligent Systems, vol. 2, no. 1, pp. 12-22, 2008. [15] Y. S. Chen, and L. Yao, "Robust Typ-2 fuzzy control of an automatic guided vehicle for wall-following," 2009 International Conference of Soft Computing and Pattern Recognition, 2009,pp. 172-177. [16] A. V. Akkaya, "Effect of bulk modulus on performance of a hydrostatic transmission control system," Sadhana, vol. 31, pp. 543-556, 2006. [17] E. G. Nezami, Y. Hashash, D. Zha, and J. Ghaboussi, "Simulation of front end loader bucket-soil interaction using discrete element method," International Journal for Numerical and Analytical Methods in Geomechanics, vol. 31, pp. 1147-1162, 2007. [18] O. Costillo and P. Melin, Type-2 fuzzy logic theory and applications, Berlin: Spring-Verlag, 2008. [19] T. Viersm, Analysis, synthesis and design of hydraulic Servosystems and Pipelines, Nederland: University of Delft, 2nd Edition, 1990. [20] Y. Zao and E. G. Collins, "Fuzzy PI control of weight belt feeder," IEEE Transaction on Fuzzy Systems, vol. 11, no. 3, pp. 311-319, June 2003. [21] L. Reznik, Fuzzy Controllers, Newnes, Australia, 1997