Published November 26, 2010
| Version 1908
Journal article
Open
Thermo-chemical Characteristics of Powder Fabricated by Oxidation of Spent PWR Fuel
Authors/Creators
Description
Thermochemcial characteristics of powder fabricated
using oxidation treatment of spent PWR fuel and SIMFUEL were
evaluated for recycling of spent fuel such as DUPIC process.
Especially, the influence of spent fuel burn-ups on the powder
fabrication characteristics was experimentally evaluated, ranging from
27,300 to 65,000 MWd/tU. Densities of powder manufactured from an
oxidation, OREOX and the milling processes at the same process
conditions were compared as a function of the fuel burn-ups
respectively. Also, based on chemical analysis results, homogeneity of
fissile elements in oxidized powder was confirmed.
Files
1908.pdf
Additional details
References
- J.-S. Lee, K.-C. Song, M.-S. Yang, K.-S. Chun, B.-W. Rhee, J.-S. Hong, H.-S. Park, C.-S. Rim, and H. Keil, "Research and Development Program of KAERI for DUPIC (Direct Use of Spent PWR Fuel in CANDU Reactors)," Proc. Int. Conf. and Technology Exhibition on Future Nuclear System, GLOBAL'93, September. 12-17, 1993, American Nuclear Society, Seattle, USA.
- M.-S. Yang, H. Choi, C.-J. Jeong, K.-C. Song, J.-W. Lee, G.-I. Park, H.-D. Kim, W.-I. Ko, J.-J. Park, K.-H. Kim, H.-H. Lee, J.-H. Park, "The Status and Prospect of the DUPIC Fuel Technology," Nuclear Engineering and Technology, Vol.38, pp 359-374, 2006.
- W.-K. Kim, J.-W. Lee, G.-I. Park, D.-Y. Lee, Y.-S. Lee, M.-S. Yang, "Development of Manufacturing, Inspection and Test Plan for Fabrication of DUPIC Fuel Pellets and Elements," KAERI/TR-2349/2002, Korea Atomic Energy Research Institute, 2002.
- G.-I. Park, J.-W. Lee, W.-K. Kim, D.-Y. Lee, Y.-S. Lee, M.-S. Yang, "Development of Manufacturing and Operating Procedure for Fabrication of DUPIC Fuel," KAERI/TR-2382/2003, Korea Atomic Energy Research Institute, 2003.
- J. Cobos, D.Papaionannou, J.Spino, M. Coquerelle, "Phase Characterisation of Simulated High Burn-up UO2 Fuel," J. of Alloys and Compounds, Vol. 610, pp 271-273, 1998.
- J.-W. Lee, W.-K. Kim, Jae W. Lee, G.-I. Park, M.-S. Yang, K.-C. Song, "Remote fabrication of DUPIC fuel pellets in a hot cell under quality assurance program," J. of Nuclear Science and Technology, Vol. 44, No. 4, pp 597-606, 2007.,
- G-I. Park, Jae W. Lee, J.-W. Lee, Y.-W. Lee, K.-C. Song, "Effect of impurities on the microstructure of DUPIC fuel pellets using the SIMFUEL techniques," Nuclear Engineering and Technology, Vol. 40, No. 3, pp 191-198, 2008.
- G.-I. Park, K.-W. Kim, D.-Y. Lee, J.-W. Lee, J.- J. Park, K.-C. Song," Effect of spent PWR fuel burn-up on oxidative decladding efficiency," Global 2009, September 6-11, 2009, American Nuclear Society, Paris, France.