Objects of this class contain a self-bound collection of mass bearing particles.
Block Specimen
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ori_xxx_xxx-a308af15cef14d8096b3a61ad8a2701d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
object
record
Class representing the execution of a particular computer code which extracts/reshapes/processes data from one form to another.
Data Processing
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tak_xxx_xxx-ca48d075c7de4872b4f12e464652bcb1-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dat_pro_xxx-b44582ea9cd7420896bc0b644cdcf8f5-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/opt_sur_pro-f096c110525747cab4fe81f4a23b20f8-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tac_sur_pro-76cb2538e8b5460b8f71e0ede2db6ddc-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_exp_xxx-9b84c31083254e40a6eb78601271d381-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ele_mic_xxx-840bbf9ffd9648fc883b251d106e3733-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/opt_mic_xxx-c73af6d31f314907b33d212d43f61891-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/use_xxx_xxx-f130aac753c3467a9ef4cd8d2163a609-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/sof_xxx_xxx-43c5e712afb04a16a8954dbb3c865c0f-vp
process
Electrical current which flows along the beam path.
Beam Current
float
The voltage of the used beam.
Beam Voltage
The weight applied by the weighing object placed to supply normal load.
Actual Applied Deadweight Setpoint
The actual sample rate of the time series. Please note that this might not be the same as the sample rate setpoint used when conducting the experiment.
Actual Sampling Rate
Name of the advisor of the work or thesis.
Advisor
list
The force for uncertatinty calculation of the normal force sensor immediately after the experiment finished.
After-test Unloaded Zero Offset Load
n/a
option
100Cr6 Steel
10XDI-N
50XDI-N
The agreed on abbreviation (= short common name) of the variable the time series captured.
Abbreviation
string
A substrate which holds abrasive medium
Abrasive Paper
The name of the material of the abrasive particles.
Abrasive Particles Material
Denotes the material of the abrasive particles.
Acetone
ai0
ai1
ai2
ai3
ai4
ai6
Air Dry
Air (Humidity Controlled)
Air (Unconditioned)
Al2O3
Explanation of the alignment of the pattern with features on the specimen surface.
Alignment
Alois Schmitt GmbH & Co. KG
Amplitude Matrix for Spectrogram
Instances of this class characterize the measurement offset in radial-direction when multiple profiles from the same sample are taken.
Angular Offset Between Profiles
Annealing
ao0
Analog Output proportionality factor.
AO Factor
Analog Output offset amount.
AO Offset
Apprentice
Aral Multrol G 100
ATM GmbH, Mammelzen, Germany
ATM GmbH
Automatic
Term containing information about the available hardness testing indenters of a hardness testing system.
Available Hardness Testing Indenters Array
Describes the range of rotation of the given axis.
Axis Rotation Angle Range
Describes the angle offset between two coordinate systems.
Axis Rotation Angle
Back and Forth
Bachelor Candidate
Bachelor's Thesis
Back
n/A
Backlash
The contact partners are a ball and a nominally flat and even surface.
Ball-on-Flat Contact
The maximum permissable round tube diameter.
Band Saw Cutting Speed
Base Body Rotation
Base Body Tilt
The speed of the rotating plate.
Base Speed
Big-Endian Ordering, 64-Bit Long Data Type
Big-Endian Ordering
Offset amount that has to be applied to all data in a file to get meaningful values.
Binary File Offset Amount
Scaling factor that has to be applied to all data in a file to get meaningful values.
Binary File Scaling Factor
*.bin
bit
Bitmap
Remove loose particles/dust/residue by applying compressed air.
Blowing With Compressed Air
BNC
Bolt (Mandrel)
A bolt or bolts compressing the specimen directly to the machinery's construction.
Bolt
Bottom
Purchased
Brinell
Bruker Corporation, Billerica, MA, USA
Bruker Corporation
Bruker Nano Analytics
Buehler, Esslingen am Neckar, Deutschland
Buehler
Build-in Drive
C-863 Mercury Servocontroller
Camera for Chamber View
A cap that compresses the specimen around its periphery while being tightened on the end of a threaded rod, in turn attached to equipment.
Cap on Bolt
Capacitive Sensing
Neuhausen, Germany
Carbolite Gero GmbH & Co. KG
Carbamide
Category 2
Cemented Carbide
Centre Suisse d'Electronique et de Microtechnique
Ceramic
Character
CHR 150 N
Chromatic Aberration
Circle
Description how to correctly cite the software or data.
Citation
The maximum permissable diameter of specimen to be held.
Clamping Area Diameter
The maximum permissable length of specimen to be held.
Clamping Area Length
The maximum permissable width of specimen to be held. Shorter than Length dimension.
Clamping Area Width
Cleaning Cross Section
The duration setting assigned to be maintained by the machine or user in a cleaning process.
Cleaning Duration
Cleaning Step
Climate Box
Wegberg, Germany
Cloeren Technology GmbH
Clockwise
Reduce sample roughness — which resulted e.g. from previous grinding steps — to get closer to the targeted final roughness.
Coarse Roughness Adjustment
The travel range of the coarse/fast vertical drive of the machine's column (the distance inbetween lower limit and upper limit of the z-axis/vertical axis).
Coarse Vertical Travel Range
Cold Air Jet
Column
A natural-language description of the composition of the medium.
Composition Information
Unconstrained statement by operator about a process or object.
Comment
Composite
Scaling factor that has to be applied to data. The conversion factor to convert V/mA raw-signal into something physically meaningful.
Conversion Factor
Scaling offset that has to be applied to data. The conversion offset to convert V/mA raw-signal into something physically meaningful.
Conversion Offset
Control the Tribometer in Use
The volume of the condenser.
Condenser Volume
Continuous
Confocal
Instances of this class characterize the prescribed coolant flow rate.
Cooling Medium Flow Rate
Method to supply the coolant.
Coolant Supply Method
Process step that reduces temperature
Cooling
Corundum
Counterclockwise
CrFeAl Heating Coil
Describes the step of cross section cutting.
Cross Section Cutting Step
Contains information on where the CS is cut, e.g., “in the center of wear track #XY”.
Cross Section Position
Cryo Trap
CSEM
Cup Grinding Wheel
Curved Unidirectional
Direction in which the saw cuts the specimen
Cutting Direction
The setting assigned to be maintained by the machine.
Cutting Pressure Setpoint
Cutting Speed Setpoint
Carbon
The cycle setting assigned to be maintained by the machine in a tribological process.
Cycle Setpoint
integer
D25
D46
D91
D96
DAQ Analog Input proportionality factor.
DAQ AI Factor
DAQ Analog Input offset.
DAQ AI Offset
Instances of this class indicate whether the sensor's dark correction functions prior to the measurement was performed.
Dark Correction Performed
boolean
Data Processing and Plotting Script
DBL 6513.00
DC Motor with a Preloaded Precision Leadscrew
DC Motor
Dead Weight(s) (Dampened)
Dead Weight(s)
De-Ionized Water
The values in the time series are dervied from another time series — typical example is the coefficient of friction.
Derived
Direction of the access to the desiccator, specimen in or out of the desiccator.
Desiccator Access Direction
The description of the variable the time series captured.
Description
The name of the used detector.
Detector
Diamond 5 µm 90°
Diamond (Fixed Installation)
Diamond Suspension
Diamond Wire
Diamond
The specification of a preferencially curved object defining its diameter.
Diameter
Differential
DIN EN 12198
Instances of this class give information about the distance between the specimen and the demagnetizing plate. Often an estimate is good enough for this value.
Distance Between Specimen and Plate
Discontinuous (Irregular Time Interval)
Distilled Water
Disc
Dissertation
Dorfner Schleifmittel GmbH Leonberg
Double-sided tape secures the specimen's bottom surface to the equipment's structure.
Double-sided Tape
Droplet (with replenishment)
Dry Rub
DT6112
DTA-10D-CA
Dual Beam Helios NanoLab 650
The duration setting assigned to be maintained by the machine in a specific process.
Duration Setpoint
The duration of a procedure.
Duration
Instances of this class characterize the duty cycle of the plate.
Duty Cycle
Time period during which the beam remains on one position/stationary.
Dwell Time
Information if EBSD was used during SEM session.
EBSD
EDX Mode
EDX
EK200
EK36
EK80
Elastic Spring
The size of the electropolished area of the sample.
Electropolishing Area
A beam which consists of electrons.
Electron Beam e-
The term denotes the flow rate of the electrolyte as specified by the vendor.
Electrolyte Flow Rate
Denotes the goal of the instance of the process.
Electropolishing Goal
Electropolishing Program
The temperature of the electrolyte prior to the beginning of the process.
Electrolyte Temperature
Electropolishing Voltage
The area of the window on the mask which defines the electropolished area.
Electropolishing Window Area
Elmag
The name of the beam source of the equipment.
Emitter
The agreed upon abbreviation of the equipment.
Equipment Abbreviation
Boolean that indicates whether the grinding machine is properly equipped for wet grinding processes i.e. utilizing a liquid cooling medium. Often this is realized by some sort of enhousing or fume hood.
Equipped for Wet Grinding
The type of machine and the way it is referred to. The friendly way to identify it.
Equipment Friendly Name
The unique alphanumeric ID of the machine. Could be the serial number or any other assigned unique ID.
Equipment ID
Equipment Distance/Displacement Resolution
Equipment Resolution
Esprit
Ethanol
Exchangeable
Subsection holds information about when the experiment was finished.
Experiment End Time
date
Subsection holds information about when the experiment was started.
Experiment Start Time
e- Flash HD
Falcon 608
FEI Company, Hillsboro, OR, USA
FEI Company
Waltham, Massachusetts, USA
Thermo Fisher Scientific
Term containing information if FIB was used.
FIB
Field-Free Mode
The naming pattern of the given file.
File Name Pattern
Denotes the name of a given file.
File Name
The surface finish — minimal removal of waviness and generation of desired level of roughness.
Final Roughness Adjustment - Finish
The resolution of the precise/fine/slow vertical drive of the machine's column (the step size of this drive).
Fine Vertical Travel Resolution
The travel range of the precise/fine/slow vertical drive of the machine's column (the distance in between lower limit and upper limit of the z-axis/vertical axis).
Fine Vertical Travel Range
Denotes the sequential number of the firs column in the tabular data file, which contains raw data values.
First Data Column
Denotes the sequential number of the firs row in the tabular data file, which contains raw data values.
First Data Row
Operator's first name/s (= given name/s).
First Name
The mating surfaces are nominally flat and even.
Flat-on-Flat Contact
Object's Flash Point.
Flash Point
Floating-Point Number
The floor in a building. Ground floor has value "0". First underground/basement floor has value "-1"
Floor
Fraunhofer IWM
Frequency Array for Spectrogram
The user friendly (= long common) name of the variable the time series captured.
Friendly Name
Fries Research and Technology GmbH
Front-Left-Top Intersection
Front-Right-Top Intersection
Front
A 2-dimensional tabular data type. A more generic version of 'Spreadsheet'.
Generic Matrix
gram force
Gluing Specimen onto FIB Stub with Silver Glue
Gluing Specimen with Carbon Patch onto FIB Stub
Glue secures a specimen's surface to the equipment's structure.
Gluing
GMN Georg Mueller Nuernberg AG
G&N Genauigkeits Maschinenbau Nuernberg GmbH
Goodfellow
Graph of Processed Data
Greisinger electronic
Grease
Grinding Cup
A reusable substrate which holds abrasive medium.
Grinding Disk
The physical characteristic called grit size.
Grit Size
Grinding Step
Denotes the size of the abrasive particles.
Grit
Gwyddion
half-automatic (central pressure)
half-automatic (single pressure)
A process to increase hardness of a metal. Typically done by heating to a certain temperature and subsequent quenching.
Hardening
Haseltal Werkzeugbau und Kunststofftechnik GmbH
Heat Rods
The speed of the head.
Head Speed
Process step that increases temperature.
Heating
For unidrectional tribological experiments using a disc as basebody, this meta-information describes the maximum cyclic fluctuation in the disk's height with respect with the counterbody, before the experiment begins.
Height Fluctuation Range
The specification of an object defining its height.
Height
Helios Nanolab 650
Heraeus
Hexagonal Close Packed Crystal Basal Plane
HiWi
Holding
Hommel-Etamic
Horizontal Field Width
(Human Readable) Processed Data
HV10
HV20
IAM-CMS
Institute for Applied Materials - Reliability and Microstructure. German name: Institut für Angewandte Materialien – Zuverlässigkeit und Mikrostruktur. Previously known as IAM-CMS.
IAM-ZM
Institute for Applied Materials - Computational Materials Science
iFast Developer's Kit
Denotes the magnification factor(s) used during the process.
Magnification
Immersion Mode
Inductive Sensing
The initial amount of interfacial medium supplied to a process.
Initial Amount of Interfacial Medium
Innovatest
Interferometry
A beam which consists of Ga+ ions.
Ion Beam Ga+
IP54
ISO 2719
Isopropyl Alcohol
Information on whether the material is ferromagnetic or not. The magnetic state (or magnetic phase) of a material depends on temperature, pressure, and the applied magnetic field. A material may exhibit more than one form of magnetism as these variables change.
Is Specimen Material Ferromagnetic
J967D
Jumo dTRON 04.1
Kadi4Mat Communication Script
Karlsruhe Institute of Technology (KIT)
Kennametal Inc.
Neu-Isenburg, Germany
Keyence Deutschland GmbH
Keyence
kg force
kgf
kg*m^(-3)
kHz
A vise compressing the specimen directly to a kinematic mount, which in turn is attached to the equipment's structure.
Kinematic Mount and Vise
A bolt or bolts compressing the specimen directly to a kinematic mount, which in turn is attached to the equipment's structure.
Kinematic Mount and Bolt
The specification of an object defining its kinematic viscosity acquisition temperature.
Kinematic Viscosity Acquisition Temperature
The specification of an object defining its kinematic viscosity.
Kinematic Viscosity
Kistler
KL 1500
km*h^(-1)
Knoop
Lab Bench
Label
LabVIEW
Operator's last name/s (= family name/s).
Last Name
Describes the magnitude of lateral axis offset between two coordinate system.
Lateral Axis Position
LectroPol5
Left
Leica KL1500
Leica
Instances of this class specify the lens magnification.
Lens Magnification
The specification of an object defining its length.
Length
Lens
LEO Ultrasonic Co Ltd
LEO-801
Cologne, Germany
Leybold GmbH
License for software, data etc.
License
E.g. pressing a cylinder with its curved side on a flat surface.
Line Contact
Linear Unidirectional
Linear Variable Differential Transformer (LVDT) Sensing
Line
Little-Endian Ordering, 64-Bit Long Data Type
Little-Endian Ordering
Loading
M-403.2PD
M-404.2DG
Magnetic Drive (Counterweighed and Dampened)
Magnetic Drive
A magnet secures a specimen's surface to the equipment's structure.
Magnetic
Maintain Predefined Humidity
Manual Drive
Manual
manual
Mass amount of an ingredient.
Mass amount
Master Candidate
The specification of an object defining its mass density acquisition temperature.
Mass Density Acquisition Temperature
The specification of an object defining its mass density.
Mass Density
Master's Thesis
The specification of an object defining its mass.
Mass
MaTecK Material-Technologie & Kristalle GmbH
MATLAB
Maximum base speed at which the machine can operate.
Maximum Base Speed
The maximum beam voltage under which the equipment can operate.
Maximum Beam Voltage
Instances of this class characterize the maximum permissible duration for a process maintained by a machine.
Maximum Duration
The maximum possible size of the electropolished area, as defined by the window within the electropolishing mask.
Maximum Electropolishing Area
Maximum electrolyte flow rate at which the machine can safely operate.
Maximum Electrolyte Flow Rate
The maximum value of the electropolishing voltage at which the machine can safely operate.
Maximum Electropolishing Voltage
Maximum head speed at which the machine can operate.
Maximum Head Speed
The maximum HFW of the beam.
Maximum Horizontal Field Width
Maximum Magnification
Instances of this class represent the maximum permissable measument speed.
Maximum Measurement Speed
Instances of this class represent the maximum permissable normal load.
Maximum Normal Load
Maximum number of specimens which can be attached to the machine
Maximum Number of Specimens
Instances of this class characterize the maximum permissable turning speed.
Maximum Positioning System Turning Speed
The maximum probe current under which the equipment can operate.
Maximum Probe Current
The maximum height a workpiece/sample is allowed to have when a (previously unused) ceramic grinding cup is mounted.
Maximum Specimen Height With Ceramic Cup Mounted
The maximum height a workpiece/sample is allowed to have when a (previously unused) diamond grinding cup is mounted.
Maximum Specimen Height With Diamond Cup Mounted
The specification of an object defining its thickness.
Maximum Specimen Treatable Thickness
The equipment setting which specifies the maximum achievable temperature by the machine.
Maximum Temperature
Instances of this class represent the maximum permissable travel speed, while no measurement is taken.
Maximum Travel Speed
The maximum permissable turning speed.
Maximum Turning Speed
The physical quantity that characterizes the maximum voltage at which the connection is used.
Maximum Voltage Setpoint
Instances of this class characterize the maximum permissable working tool turning speed.
Maximum Working Tool Turning Speed
mbar
Measure Acoustic Emission
Instances of this class characterize the measurement direction as defined by the equipment specifications.
Measurement Direction
Measure Forces and Moments
Measure Load Cell Displacement - Respectively the Friction Force
Measure Load Cell Displacement - Respectively the Normal Force
The measurement range of the given sensor.
Measurement Range
Instances of this class represent the maximum range of values that the system can capture in one acquisition process/one measurement.
Instances of this class represent the maximum resolution that the system can capture in one acquisition process/one measurement.
Measurement Resolution
Measure Stage Position of Sliding Direction Axis Motion
Measure the Height of the Counter Body's Bulk - Respectively Its Wear
Measure the Height of the Base Body's Surface of Tribological Interest - Respectively Its Waviness
Measure ultrasonic
Values that are acquired by means of DAQ devices.
Measured
Metal
Metadata
Göppingen, Germany
Micro-Epsilon Eltrotec GmbH
MicroProf
Minimum base speed at which the machine can operate.
Minimum Base Speed
The minimum beam voltage under which the equipment can operate.
Minimum Beam Voltage
Instances of this class characterize the minimum permissible duration for a process maintained by a machine.
Minimum Duration
Minimum head speed at which the machine can operate.
Minimum Head Speed
Minimum Incremental Motion
Instances of this class determine whether a recorded signal value is considered valid or not.
Minimum Intensity Threshold
Minimum Magnification
Instances of this class represent the minimum permissable measument speed.
Minimum Measurement Speed
Instances of this class represent the minimum permissable normal load.
Minimum Normal Load
Instances of this class characterize the minimum permissable turning speed.
Minimum Positioning System Turning Speed
The minimum probe current under which the machine can operate.
Minimum Probe Current
Instances of this class represent the minimum permissable travel speed, while no measurement is taken.
Minimum Travel Speed
The minimum permissable turning speed.
Minimum Turning Speed
The physical quantity that characterizes the minimum voltage at which the connection is used.
Minimum Voltage Setpoint
Instances of this class characterize the minimum permissable working tool turning speed.
Minimum Working Tool Turning Speed
min^(-1)
min
ml*h^(-1)
mm*s^(-1)
Model 4240
Motion Control
Instances of this class give information about the distance between sample and trailing edge of the demagnetizing plate after finishing the respective demagnetizing motion.
Motion End Distance in Front of Demagnetizing Plate
Instances of this class characterize the relative motion of an object. For Demagnetizing: The (estimated) speed of the demagnetizing motion. Sometimes is given as seconds per demagnetizing motion.
Motion Speed Setpoint
Instances of this class give information about the distance between sample and the leading edge of the demagnetizing plate at the start of the respective demagnetizing motion.
Motion Start Distance in Front of Demagnetizing Plate
MPa
MPS 2 R300
MPS 2
µm*s^(-1)
MSC7401
Multi Charge Amplifier Type 5019A
Multi Load Cell
µm*V^(-1)
MZE, 30.48
Austin, Texas, USA
National Instruments
Negative
None
The prescribed normal load set at the beginning of a process.
Normal Load Setpoint
Equvallent to not entering any value - the preferred solution. Usually denotes a proportion - like "times" something, for example, magnification; or some type of count a count.
null
Instances of this class represent the total number of measurements for one sample.
Number of Collected Profiles
Denotes the total number of columns in the tabular data file.
Number of Columns
Number of files stored in an archive.
Number of Files in Archive
Number of files used or generated by a process.
Number of Files
Instances of this class provide information on how many option value sets a file contains (= number of option time series or number of recorded channels).
Number of option Value Sets in File
Instances of this class represent the total number of a particular repeated action.
Number of Procedure Repeats
Denotes the total number of rows in the tabular data file.
Number of Rows
Number of plasma cleanings performed.
Number of Plasma Cleanings
Instances of this class characterize the measurement number of scanning points per line in x-direction, as defined by the equipment.
X Number of Points
OFE Copper
Instances of this class characterize the measurement offset in x-direction when multiple profiles from the same sample are taken.
X Offset Between Profiles
Instances of this class characterize the measurement offset in x-direction as defined by the equipment.
X Offset
OFHC Copper
Oil
Omniprobe Micromanipulator E225868
Open Cycle - Fresh Medium
OPTIMUS TKD
OptoSigma
Percentage of overlapping area.
Overlapping Area
Overview Camera
Oxford Instruments
Paper
PCI
Pellet
PhD Candidate
Phosphoric Acid
Karlsruhe, Germany
Physik Instrumente (PI) GmbH & Co. KG
Piezo Drive
Piezo Electric
Pin-on-Disc Machine
PI MiKroMove
Plasma Cleaner Unit LP
Plate
Plµ Neox
Pneumatic Drive
Pneumatic
The type of contact that forms when a convex spherical (or aspherical) curved object is pressed against a flat surface or another convex shaped object.
Point Contact
Average grain size of polishing medium.
Polishing Medium Grain Size
Polishing Step
Instances of this class specify the pole surface size.
Pole Surface Length
Pole Surface Width
Polygon
Polymer
Porous Alumina (Hard)
Porous Alumina (Soft Followed by Hard)
Porous Alumina (Soft)
The resolution of the position reading system.
Position Reading Resolution
Instances of this class represent the maximum deviation from a prescribed position.
Positional Repeatability
Instances of this class characterize the set turning speed.
Positioning System Turning Speed
Poster
Positive
Postdoc
Object's Pour Point.
Pour Point
PowerPro 4000
Instances of this class characterize the power consumption of a laboratory equipment.
Power Consumption
The physical quantity that characterizes the operating voltage at which the power supply is used.
Power Supply Voltage
The physical quantity that characterizes the power conversion capability of a power supply
Power Supply Wattage
Term containing information about the vacuum before venting the chamber to mount the sample. It is used to track the quality of vacuum in the chamber and serves as an indicator if any part of the vacuum system is causing problems
Pressure Before Venting
Pre-Process Cleaning
Term containing the time the specimen was already exposed to air before the process/procedure/experiment has started.
Cumulative Specimen Exposure Time in Ambient Air
The force of the normal force sensor immediately after preloading the stage.
Pre-test Unloaded Relaxed Zero Offset Load
Principal Investigator
Principle of Vapor Generation
Processed Data
Subsection holds information about when the procedure was finished.
Procedure End Time
Subsection holds information about when the procedure was started.
Procedure Start Time
Propanol
Professor
Pt dep
Pt e-dep surface
Platinum
Python
QATM
Process step intended to cool a metal at a rapid rate. This is most often done to produce a martensite transformation. Depending on the alloy and other considerations (such as concern for maximum hardness vs. cracking and distortion), cooling may be done with forced air or other gases, (such as nitrogen). Liquids may be used, due to their better thermal conductivity, such as oil or water.
Quenching
R2022b
Instances of this class characterize the contact position with respect to the center of a disc in a pin-on-disc tribological experiment.
Radial Position on Disc
The specification of a preferencially curved object defining its radius.
Radius
Denotes whether the machine was cleaned using the preprogrammed cleaning procedure.
Ran Preprogrammed Cleaning Procedure
Raw Data Mapping
Raw Data Reshaping and Augmentation Script
Raw Data
Rectangle
Reciprocating
Get a flat surface. Done with a coarse grinding tool typically.
Reduce Waviness
Regular Cross Section
The prescribed duration of relaxation of the induced load, in order for a system to stabilize prior to the start/end of the process.
Relaxation Duration Setpoint
The relative height measured for example by the stage at the relative positive track end.
Relative Height at Track Relative Positive End
The relative height measured for example by the stage at the relative negative track end.
Relative Height at Track Relative Negative End
Relative Lateral Position of Sensor
Relative Starting Position Setpoint
Position on the specimen orthogonal to sliding direction
Relative Transverse Position
Remove Scale Layer
The amount of interfacial medium supplied to a process per time, when continuous replenishment setting is used.
Replenishment Rate
Reshaped and Augmented Raw Data
Reshaped Raw Data
Right
Contains information on whether the sample was rinsed with water after the electropolishing process.
Rinsed with Water
The process of rinsing the sample's surface with a jet of liquid medium.
Rinsing
Rod
Denotes the sequential number of the respective row or column described by 'Tabular Data Contents Specifications'.
Row/Column Number
Row
RSE
The duration setting assigned to be maintained by the machine in a tribological process.
Runtime Setpoint
Sample Point Array for Spectrogram
Way of containing a liquid during a scientific process. Only fixed, and not improvised, solutions.
Specimen Submersion Method
Saphir 320
Brügg, Switzerland
Saphirwerk AG
Direction of the beam scan of the procedure step
Scan Direction
Scan Topography
Scratch Mark
Self-Mixed
semi-automated
Contains information whether SEM was used or not.
SEM
Sensor Calibration Values
Sensofar
The sensor sensitivity.
Sensitivity
The physical quantity that places an object in a specific position within a sequential order.
Sequential Order Position
Subsection holds information about when the setup of an experiment was finished.
Setup End Time
Subsection holds information about when the setup of an experiment was started.
Setup Start Time
SE Detector R580
Shell
SiC
Signed Integer
Signal Recording
Single-crystal Sapphire
Instances of this class indicate the size in bits of the values to read.
Size of Values to Read
Length between both end points of the sliding track.
Sliding Track Length
Sliding
Values that originate from the software (e.g. time stamps, cycle number indicating values, test programm step numbers etc.)
Software-Generated
Solvent
The maximum height inside the chamber of a furnace.
Space Height
The maximum length inside the chamber of a furnace.
Space Length
Instances of this class characterize the specimen positioning system rotary speed during spark out phase. Only needed if the value is different from the value for key 'Workpiece positioning system rotary speed'.
Spark Out Rotary Speed
Instances of this class characterize the spark out time given in number of table rotations.
Spark Out Table Rotations
Instances of this class characterize the time the machine is allowed to spark out after the last feed, i.e. grind with low pressure.
Spark Out Time
The maximum width inside the chamber of a furnace.
Space Width
Specimen Container
A unique alphanumeric ID of a specimen. Could be an assigned unique ID. Could be a list of unique IDs.
Specimen ID
Term informs about the specimen orientation.
Specimen Orientation
The speed setting assigned to be maintained by the machine in a scientific process.
Speed Setpoint
Specimen Sledge
Sphere
A tabular data type with named columns and/or rows.
Spreadsheet
The equipment setting which specifies the starting temperature setting of a machine.
Starting Temperature
Stepper and Lead Screw
Stone Table with Active Pneumatic Dampers
Stone Table with Passive Pneumatic Dampers
Stone Table
Denotes the storage location of the specimen.
Storage
Instances of this class represent the maximum deviation from a prescribed straight motion across the entire measurement range.
Straightness Accuracy
Stream File
Strain Gauge
Willich, Germany
Struers GmbH
Strapping Specimen with Copper Tape
Date of submission.
Submission Date
Success of the heat treatment procedure.
Success
Contains information on where the surface image is taken.
Surface Image Position
tab
Denotes whether scotch tape was used to reduce the electropolished area. If the desired area is not covered by the existing masks, it is possible to define the area by use of said scotch tape.
Tape Used
The humidity setpoint for the climate inside the climate box.
Target Controlled Humidity
The equipment setting which specifies the temperature setting of a machine.
Target Heating or Cooling Temperature
The targeted normal load as a function of another direct input (e.g. dead weight) at the beginning of a process.
Targeted Normal Load
μTC, 30.49
Technician
Tempering is a process of heat treating, which is used to increase the toughness of iron-based alloys. It is usually performed after hardening, to reduce some of the excess hardness, and is done by heating the metal to some temperature below the critical point for a certain period of time, then allowing it to cool in still air.
Tempering
Test Program (Set of Operating Points)
Thickness
The tilt angle range of the stage.
Tilt Angle Range
Instances of this class identify when a delivery was left at the research institution. Please note: In the Kadi4Mat the data type for this is Date — dd. "Month" yyyy HH:MM:SS.
Time at Receipt of Delivery
Time Duration
Instances of this class contain information about the time when an electronic equipment was self calibrated last (e.g. DAQ Board).
Time of Last Self Calibration
A multi-dimensional tabular data type with named columns and sequential row data values.
Time Series Data
Subsection holds information about when the experiment was conducted.
Timestamp
Instances of this class represent the angle of a measuring tip, when examined from the side in a measurement.
Tip Angle
Instances of this class represent the radius of a measuring tip.
Tip Radius
Contains information whether TKD (transmission Kikuchi diffraction) was used or not.
TKD
Top
Instances of this class represent the total elapsed time of an experiment.
Total Elapsed Time
Total Number of Reciprocating Cycles
Denotes the total number of reciprocation cycles.
Total Number of Reciprocation Cycles
Describes the transversal offset between two coordinate systems.
Transversal Axis Position
Describes the direction which coordinate system is transformed into which.
Transformation Direction
Information about the "distance equivalent" that an experimental contact has been exposed to by the end of an experiment.
Total Traveled Distance
The travel range of the tribometer.
Travel Range
Track Relative Position
Transverse
TUC 2442 91
TURBOVAC 90i
Instances of this class quantify the turning frequency in a process.
Turning Frequency
The type of optical filter used during the process.
Type of Filter
The process of ultrasonic cleaning a sample immersed in a liquid medium (solvent).
Ultrasonic Cleaning
The phenomenon called atmospheric pressure of the surroundings.
Uncontrolled Atmospheric Pressure
The phenomenon called relative humidity of the surrounding environment.
Uncontrolled Environment Relative Humidity
The phenomenon called temperature of the surroundings.
Uncontrolled Environment Temperature
First step of grinding. The grinding tool will typically start to abrade at merely one point of the surface. After this process step, the whole surface is being abraded.
Uniform Specimen Height
Unsigned Integer
USB
USB-6002
USB-6212
List of files used for data processing.
Used Data Files Array
Operator's abbreviation (if existent). Only needed for users of the Fraunhofer IWM.
User Token
v5.5.1 build 3318
Pressure of the reached vacuum.
Vacuum Pressure
The end of a vacuum line is directly attached to specimen's surface to keep it attached to a piece of equipment.
Vacuum
Link to a version controlled repository for software and data, e.g. GitLab.com.
Version Controlled Repository
Release date of the version.
Version Date
Instances of this class characterize the vertical end height in a process.
Vertical End Position
Instances of this class characterize the number of 360° rotations the sample mounting table completes in between two infeed steps.
Vertical Infeed Table Rotations Interval
Instances of this class characterize the vertical infeed time interval in a process. i.e. The time in between two option infeed operations.
Vertical Infeed Time Interval
Instances of this class characterize the vertical start height in a process.
Vertical Starting Position
Instances of this class characterize the vertical step size in a process.
Vertical Step Size
VHX-600
VH-Z20R
VH-Z250R
VH-Z00R
Vickers
A vise mechanism compressing the base body's side surfaces to secure them to the machinery's construction.
Vise
Volumetric amount of an ingredient.
Volumetric amount
VS 15665-OL
Wagner Magnete
Warm Air Jet
Water
WC-Ni
Mannheim, Germany
well Diamantdrahtsägen GmbH
White Light Interferometry
The specification of an object defining its width.
Width
Wieland
Windows 10
Windows 98
Windows Vista
Windows XP
The process of wiping the sample's surface with some kind of tissue/fabric. Can involve a liquid medium (solvent).
Wiping
The name of the base material of the wire.
Wire Base Material
Average diameter of the abrasive particles on the wire.
Wire Grit Size
Instances of this class specify the available height of the volume for manipulation within a machine.
Working Area Height
Instances of this class specify the available length of the area for manipulation within a machine.
Working Area Length
Instances of this class specify the available width of the area for manipulation within a machine.
Working Area Width
Denotes the distance from the front of the lens to the focal plane.
Working Distance
Instances of this class quantify the frequency in a process that a machine supports.
Working Frequency
Instances of this class represent the maximum range of values in x-direction (first lateral) that the system can capture in one acquisition process/one measurement.
X-direction Measurement Range
Instances of this class represent the x-axis/main lateral axis/fast axis resolution that the system can capture.
X-direction Measurement Resolution
Instances of this class represent the distance between the lower and upper limits of the x-axis/main lateral axis/fast axis.
X-direction Travel Range
The size along the x dimension.
X-Dimension
X-Max
Position of an object on another object in x direction.
X-Position
xT microscope Control
No Gas Deposition
This reads as % Relative Humidity, but "% RH" is not SI unit, so it is kept just as "%".
Instances of this class represent the maximum range of values in y-direction (second lateral) that the system can capture in one acquisition process/one measurement.
Y-direction Measurement Range
Instances of this class represent the y-axis/secondary lateral axis/slow axis resolution that the system can capture.
Y-direction Measurement Resolution
Instances of this class represent the distance between the lower and upper limits of the y-axis/secondary lateral axis/slow axis.
Y-direction Travel Range
The size along the y dimension.
Y-Dimension
Position of an object on another object in y direction.
Y-Position
Instances of this class characterize the measurement number of scanning points per line in y-direction, as defined by the equipment.
Y Number of Points
Instances of this class characterize the measurement offset in y-direction when multiple profiles from the same sample are taken.
Y Offset Between Profiles
Instances of this class characterize the measurement offset in y-direction as defined by the equipment.
Y Offset
Instances of this class represent the maximum z-direction (vertical) speed at which the system can capture.
Z-direction Maximum Measurement Speed
Instances of this class represent the maximum range of values in z-direction (vertical) that the system can capture in one acquisition process/one measurement.
Z-direction Measurement Range
Instances of this class represent the z-direction (vertical) resolution that the system can capture.
Z-direction Measurement Resolution
Instances of this class represent the minimum z-direction (vertical) speed at which the system can capture.
Z-direction Minimum Measurement Speed
Instances of this class represent the distance between the lower and upper limits of the z-axis/vertical axis.
Z-direction Travel Range
The size along the z dimension.
Z-Dimension
Class containing information about the available hardness testing lenses of a hardness testing system.
Available Hardness Testing Lenses Array
dictionary
Class containing information about the available hardness testing cameras of a hardness testing system.
Available Hardness Testing Cameras Array
Class containing information about the technical standard of the interfacial medium.
Bosch Standard
Instances of this class specify the available camera views.
Camera View Type
CAV Standard
Denotes that a given process characterizes a block specimen. For example: optical microscopy, weight measurement, length measurement.
characterizesSpecimen
none
relationship_type
Instances of this class specify the classification type of cup grinding tool.
Cup Grinding Tool Type
Relates to an object's ability to store information about the description of another object.
documentsDescriptionOf
Term containing information about the equipment used during the electropolishing process.
Electropolishing Equipment
Denotes the relationship between a piece of equipment and the procedure it is applied to.
employsEquipment
Class containing information about the flashpoint acquisition of the interfacial medium.
Flash Point Acquisition Method
Class containing information about files used for a process, e.g. input files supplied to the controlling software to run an experiment or raw data for data processing and analysis.
Input File(s) Info
Source of supply of the interfacial medium during an industrial or scientific process, where replenishment occurs. Could be for lubrication and/or cooling purposes.
Interfacial Medium Source of Replenishment
Continuity of supply of the interfacial medium during an industrial or scientific process, where replenishment occurs. Could be for lubrication and/or cooling purposes.
Interfacial Medium Supply Continuity
Way of supply of the interfacial medium during an industrial or scientific process. Could be for lubrication and/or cooling purposes.
Interfacial Medium Supply Method
When an object preserves its original main function/characteristics, but has parts modified, then it is a new version of itself.
isModifiedVersionOf
ISO Standard
Class containing information about the available cutting speed setpoints of a band saw object.
List of Available Cutting Speed Setpoints
Class containing information about the periphery's role/s in a tribometer.
List of Equipment Roles
Class containing information about the technical standard observed by the magnetic field emission.
Magnetic Field Emission Classification Standard
Class containing information about the technical standard emission observed by the magnetic field.
Magnetic Field Emission Classification
This relationship relates a scientific process to an object which supports the process, but is readily replacable during or after the process, as it its function deteriorates over time.
makesUseOfConsumable
MAN Standard
Mercedes-Benz Standard
Instances of this class characterize the direction of motion during the time the demagnetizing field is affecting the workpiece/specimen.
Motion Direction
Class containing information about all settings related to the motion inducing subsystems of the setup that played a role when conducting an experiment.
Motion Inducing Subsystem Settings
Class containing information about the material details of a block specimen. These pieces of information are either reported (and assumed true) by the vendor, or are of general knowledge, but have not specifically been measured by a FAIR'ly described process.
Nominally Known Material Information
Relates a scientific process to the objects which are physically established as its result. It can also mean it is a combination/separation of other objects, or their subparts. This property relates the parent to the child object.
originatesFromSpecimen
Denotes that a given process results in a modified size/shape/state/appearance/topography of the original physical item. This property relates a process to the objects which are physically influenced temporarily (elastically), or permanently (plastically).
physicallyModifies
This rekationship relates a scientific process to the objects which are physically established as its result. It can also mean it is a combination/separation of other objects, or their subparts. This property relates the process to the child object.
physicallyResultsIn
Term containing information about the type of the abrasive particles within the polishing medium
Polishing Medium Type
Instances of this class characterize the method of clamping of a probe arm.
Probe Arm Mounting Method
Instances of this class characterize the IP class of a machine.
Protection Class
This relationship characterizes a chain of related processes, unified by the use of the same specimen.
providesAdditionalInformationAbout
Denotes that a given process relies on the position of the wear track on a specimen to conduct a measurement or procedure. The position of the wear track is part of the metadata of the parent digital object.
queriesPositionOfWearTrackFromProcess
Denotes that a given process relies on the position of a notable feature on a specimen to conduct a measurement or procedure. The position of the feature can be, indirectly, part of the data or metadata of the parent digital object.
queriesPositionOfFeatureFomProcess
SAE Standard
The type of blade used for sawing.
Sawing Blade Type
Denotes that a given process stresses a given block specimen as a base body in the relevant process. A clear definition of what is to be called ""base body"" and what ""counter body"" in a tribologcial system does not exist. We therefore will use the following set of definitions — whereby always the first applicable definition should be used in a given case (going through the list from top to bottom): The Base body in a model experiment is the sample or body... ...whose nominal contact area is not permanently tribologically stressed during the experiment. ...that is larger. ...expected to show less wear at the end of the experiment. ...that is static during the experiment.
stressesAsBaseBody
Denotes that a given process stresses a given block specimen as a counter body in the relevant process. A clear definition of what is to be called ""base body"" and what ""counter body"" in a tribologcial system does not exist. We therefore will use the following set of definitions — whereby always the first applicable definition should be used in a given case (going through the list from top to bottom): The Base body in a model experiment is the sample or body... ...whose nominal contact area is not permanently tribologically stressed during the experiment. ...that is larger. ...expected to show less wear at the end of the experiment. ...that is static during the experiment.
stressesAsCounterBody
Instances of this class specify the classification type of stylus tip.
Stylus Tip Type
Object of this class state what type of method was used to control the susrrounding medium.
Surrounding Medium Control Method
Denotes that a given process takes data from a previous process or a dataset. This property relates a data manipulation process to the process that generated the data needed to be supplied for its excution.
takesDataFromProcess
Term containing information about the technical specifications of a sawing blade.
Technical Specifications (Sawing Blade)
Objects of this class pertain to the category of machines called temperature controller.
Temperature Controller
Instances of this class specify the classification type of tool cleaning time interval.
Tool Cleaning Time Interval Type
Denotes that a given process uses a piece of software to process data.
usesSoftware
Class containing information about the viscosity of the the piece of interfacial medium.
Viscosity Specifications
Class containing information about the PC's connected to a tribometer.
Array of Connected PC's
Class containing information about all the installed DAQ boards relevant to the tribometer's measurement.
Array of Info on Connected DAQs
Class containing information about the software used to process the data after its initial collection and recording.
Array of Software Used
Array of Software Versions
Software Versions
The rotation direction of the base.
Base Rotation Direction
The type of beam used in the process.
Beam Used
Connected Amplifier Info
Class containing information about the furnace's cooling time to room temperature.
Cooling Rate Specifications
Instances of this class contain the information to open/access/read and interprete a *.csv file's contents adequately.
*.csv File Technical Specifications
Class containing attributes about the installed DAQs.
DAQ Attributes
Field that specifies the interface that is used to connect the DAQ device to the recording PC.
DAQ Interface Name
Class containing information about the parameters that are put into the involved DAQ equipment, to run it optimally, but are not directly part of achieving the experimental objectives.
DAQ Related Inputs
Instances of this class specify the decimal separator used in a file.
Decimal Separator
Instances of this class specify the delimiter used in a file.
Delimiter
Denotes the direction in which the sequential data should be read.
Direction of Sequence
Preparation for electron microscopy.
Electron Microscopy Preparation
Class containing information about the flash point the piece of interfacial medium.
Flash Point Specifications
The method of focusing the microscope.
Focusing Method
Describes the step in the grinding process.
Grinding Process Step Type
Instances of this class give the type of grinding tool used by equipment.
Grinding Tool Type
The unit that locks the meaning of the amount of the phenomenon of hardness. This gives the scale used for the measurement.
Hardness Scale
Class containing information about the furnace's heating time to temperature.
Heating Rate Specifications
This objects of this class specify if the equipment is equipped with a climate box around the investigated scientific process (fixed installation — not improvised solutions). This allows users to filter for pieces of equipment that in general allow experiments in thouroughly controlled environments.
Housing Method
Denotes the way of introducing light to the system.
Illumination System
Class containing information about the spatial orientation of a specific face of a block specimen.
Indicated Face Orientation
Instances of this class indicate the type of infeed method.
Infeed Mode
The premises on which an object exists or a process happens. *Not to be confused with an institution as an organization, or as an employer.
Institution (Location)
The official name of the institution which the responsible person/operator belongs to.
Institution Name
The official name of the institute which the responsible person/operator belongs to.
Institute
Class containing information about the kinematic viscosity of the piece of interfacial medium.
Kinematic Viscosity Specifications
Class containing information about the file containing the program to run an experiment.
LabVIEW Program(s) Info
Contains information about the manufacturing process of the medium.
Manufacturing Process
Class containing information about the mass density of the the piece of interfacial medium.
Mass Density Specifications
Contains information about the mask used to confine the electropolished area to the desired size. The mask contains a window with a (usually) defined area.
Mask (Electropolishing)
In chemistry, the empirical formula of a chemical compound is the simplest positive integer ratio of atoms present in a compound.
Material Empirical Formula
Instances of this class indicate the type of sample containment method for positioning it in a particular place.
Method of Specimen Positioning
Class containing information about an option parameter and its setting related to a motion inducing subsystem.
Motion Inducing Subsystem Parameters
Class containing attributes about the installed subsystems responsible for making parts move in the tribometer.
Motion Inducing Subsystems Attributes
Describes the corner of the specimen in respect to which the origin of the specimen coordinate system is set.
Origin Position on Side of Tribological Interest
The rotation direction of the plate.
Plate Rotation Direction
Contains information about the cloth used during a polishing step.
Polishing Cloth
Describes the step in the polishing process.
Polishing Process Step Type
Position on Source Specimen. Position is measured w.r.t. the two origins as defined by "Spatial Information".
Position on Source Specimen
Class containing derived information about the process. All derived information stems from the information recorded in other locations of the record.
Process Summary (Cup Grinding)
Summarizes process parameters and procedures of data processing.
Process Summary (Data Processing)
Objects of this class contain publications of the kind of papers, posters or theses.
Publication
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/doc_xxx_xxx-0e7f7d94b537444bb387aaecf77cbb0a-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_xxx_xxx-c98170df4aa14cd38e9ba0d1b94ebdf0-vp
data
Contains multiple types of information related to the surface imaging.
Surface Imaging Summary
Term containing information about the technical specifications of a lubricant for polishing.
Technical Specifications (Lubricant for Polishing)
Term containing information about the technical specifications of a polishing medium.
Technical Specifications (Polishing Medium)
The objects of this class specify the type of equipment installed in a device for cooling/heating a sample directly.
Temperature Control Method
Instances of this class give the configuration for reading or writing at a terminal.
Terminal Configuration
The direction of motion when the relative (with respect to the machine) motion sets in.
Turning Direction
Instances of this class contain the information to open/access/read and interprete a *.txt file's contents adequately.
*.txt File Technical Specifications
Denotes the type of substrate which holds abrasive medium.
Type of Abrasive
Contains information about the lenses used during the process.
Lenses Used
The type of objective used during the process.
Used Objective
Term containing information about the vacuum pump connected to a furnace.
Vacuum Pump
Class containing a bundle of parameters needed for a scientific process.
Variable Load Parameters
Term containing the information to open/access/read and interpret a *.xls file's contents adequately.
*.xls File Technical Specifications
Instances of this class specify the abrasive material that a grinding tool is made of. This refers to the material doing the actual grinding, not the bond (if there is any).
Abrasive Material Type
Application for the cross section cutting step
Application
Term containing information about the beam settings used for a procedure step
Beam Settings
Class containing information about the technical specifications of a bandsaw blade.
Blade Specifications
Dimensions of the specified box.
Box Dimensions
Term containing information about scanning with the beam for the deposition or cutting pattern.
Box Information
The "unique identifier" of the building within the specific institution.
Building
Class representing the physical process of machining a block of material for eventual use in scientific processes or equipment. The exact process is unknown, but it is performed by a firm that is external to the scientific institution.
Commercial Machining
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/phy_xxx_xxx-3c41e6aa10d14a51b0c7a950b897fbba-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/phy_xxx_xxx-9da2eadd1cba429c8381945b334fe39c-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
Class containing attributes about the installed subsystems' controller responsible for making parts move/act in the tribometer.
Controller Attributes
Class containing a collection of the consumables that participated in a scientific process.
Consumables Used
Coolants are used most often in industrial processes. Important: this is the object in term of its function/role/application, and not its particular chemical composition (that would be instead an abstract representation of the internal structure).
Coolant
Term containing information about the images taken after cutting.
Cross Section Imaging
Contains multiple types of information related to the cross section.
Cross Section Summary
Term used to specify to specify the cut edge of the specimen(s).
Cutting Face
Historical list of desiccator in- and outputs of the specimen.
Desiccator Storage History
Contains information about the constituents of an electrolyte.
Electrolyte Composition
Class containing derived information after electropolishing.
Process Summary (Electropolishing)
Contains information describing a medium containing ions that is electrically conducting through the movement of those ions, but not conducting electrons.
Electrolyte
Class containing information about the spatial orientation of a block specimen.
Face Orientation Information
Term containing a collection of metadata, each associated with a file or a series of files, generated as the output of a hardness measurement process and sharing the same metadata.
File (Hardness Measurement)
Material which is deposited from the gas phase using electron or Ga+ beam.
Gas Deposition
Instances of this class specify the hardness measuring principle.
Hardness Measurement Type
Instances of this class specify the classification type of heat treatment.
Heat Treatment Type
The mode in which the images are taken.
Imaging Mode
Class containing information about the available hardness testing indenters of a hardness testing system.
List of Available Hardness Measurement Types
The way of loading the sample(s).
Loading Mode
A lubricant used along with the polishing medium to lubricate the sample/specimen during the polishing process.
Lubricant for Polishing
Class containing information about the dimensions of an object.
Machine Dimensions
The lubricant class which interfacial medium fits into best.
Material Category (Interfacial Medium)
Instances of this class give the type of relative motion between base body and counter body.
Motion Type
Class containing information about the furnace's available space for sample treatment.
Operating Space Info
Term representing the process of using a light microscope.
Light Microscopy
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/cha_xxx_xxx-5b70f2376c68474381ef5cc428fe240b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/lig_mic_xxx-de64ef91f8544beda63bbf43c6ffdce1-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/pro_xxx_xxx-0a80036373ea40d1ac7401d423b284a0-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_exp_xxx-9b84c31083254e40a6eb78601271d381-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/que_xxx_xxx-1b4f515c8fc54791b8f6269ca30a4d6a-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_exp_xxx-9b84c31083254e40a6eb78601271d381-vp
The type of orientation indicating feature.
Orientation Indicating Feature Type
Term containing information about the periphery components connected to a piece of equipment.
Periphery Info
Instances of this class contain the information about the neccessary information to convert recorded V or mA signals into the respective physical unit.
Physical Unit Conversion Details
Contains a list of step of specimen orientations on the polishing machine.
Polishing Orientation Steps
Procedure conducted in sample preparation for electron microscopy.
Preparation Procedure
Language in which the program is written, e.g. MATLAB, Python.
Programming Language
The cutting component of a machine used in a cutting process.
Sawing Blade
Class containing information about the parameters that identify the scanning tip and its use in the profilometry measurement.
Scanning Tip Specifications
The type of solvent and the way it is referred to. The friendly way to identify it.
Solvent Type
Instances of this class give the class of source/origin of a measurement.
Source Category
Class containing information about the spatial (dimensions, position and arientation) details of a block specimen.
Spatial Information
Class containing information that characterizes the block specimen positioning.
Specimen Positioning Info
Term containing information about the taken surface images.
Surface Imaging
For Tribological Processes: Objects of this class act as the medium between the tribological interface, or interfacial medium (if present), and the air in the lab as a whole. This, for example, the medium in a glove box.
Surrounding Medium
Term containing information about the parameters that are put into the involved scientific equipment to run it optimally, but are not directly part of achieving the experimental objectives.
System or Setup Inputs (Light Microscopy)
Defines the specific type of tabular data.
Tabular Data Type
Term containing information about the technical specifications of an electrolyte.
Technical Specifications (Electrolyte)
Class containing information about the technical specifications of a tactile surface profilometer.
Technical Specifications (Tactile Surface Profilometer)
Information on surrounding conditions that are not actively chosen or controlled by the researcher, which, however, might play a role in the outcome of the scientific process (e.g. "moon phase", "weather", ...).
Uncontrolled Environmental Conditions
Objects of this class pertain to the category of machines called wire saw.
Wire Saw
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/wir_saw_xxx-25611f86ae4d460a9747e0f5c301d8a0-vp
Array of Info on Objectives
Objects of this class pertain to the category of machines called band saw.
Band Saw
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ban_saw_xxx-12c7e62cfce14dc783d3015895fc400e-vp
Instances of this class give the order for reading or writing bytes or bits in a file.
Bytes or Bits Order
Class containing attributes about the installed sensors responsible for conditioning sensor outputs of a sensor.
Connected Conditioner Info
Connected PC
The (intial) type of contact used in a tribological experiment.
Contact Type
Collection of parameters which describe the coordinate transformation between the two specimen coordinate systems.
Best Estimate of Sliding Track Starting Position w.r.t. Prescribed Origin
Objects of this class pertain to the category of machines called cup grinding machine.
Cup Grinding Machine
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/cup_gri_mac-3136c4f5a61247ca9cf390b86f050459-vp
Instances of this class give the class of values to read in a file.
Datatype Class
Objects of this class pertain to the category of machines called demagnetizing plate.
Demagnetizing Plate
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dem_pla_xxx-c4882064ea124afab8aae0b78eeae19c-vp
Contains information about the settings of the Cross Section Cutting Step.
Deposition or Cut Settings
Objects of this class pertain to the category of machines that perform electropolishing tasks as their primary use.
Electropolishing Machine
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ele_mac_xxx-903f852b9cef4385aaa4a8fef788e7b5-vp
Term containing a collection of metadata, each associated with a file or a series of files, generated as the output of an electron microscopy process and sharing the same metadata.
File (Electron Microscopy)
Term containing a collection of metadata, each associated with a file or a series of files, generated as the output of a surface profilometry process and sharing the same metadata.
File (Surface Profilometry)
Term containing information that unequivocally identifies a piece of interfacial medium.
General Info (Auxiliary Medium)
Objects of this class contain information that describes the data.
General Info (Publication)
Term containing information about the equipment used during the grinding process.
Grinding Equipment
Objects of this class pertain to the category of machines called grinding machine.
Grinding Machine
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/gri_mac_xxx-b0492ca6bf9043909ee541221a225895-vp
Class representing the physical process of grinding of a specimen with the aim of changing its surface characteristics.
Grinding
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ult_cle_xxx-192eb37ff24644798963cd87107e9a5f-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/gri_mac_xxx-b0492ca6bf9043909ee541221a225895-vp
Objects of this class pertain to the category of machines called hardness tester.
Hardness Tester
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/har_tes_xxx-d1fe762442144018958df899aaffe37d-vp
Instances of this class specify the classification goal of heat treatment.
Heat Treatment Goal
More detailed description of the housing components than in Housing Method.
Housing Description
Light Microscope
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/lig_mic_xxx-de64ef91f8544beda63bbf43c6ffdce1-vp
Class containing a collection of pieces of information about where a process occured, or an object typically resides or is stored.
Location Information
Class containing information about the material details of a block specimen.
Material Information
Name of computer operating system.
Operating System Name
Objects of this class pertain to the category of machines called optical surface profilometer.
Optical Surface Profilometer
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/opt_sur_pro-9658f444fa7b4e6b8ebf0c678491e2c0-vp
Contains information specific to the polishing procedure.
Polishing Details
Objects of this class pertain to the category of machines called polishing machine.
Polishing Machine
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/pol_mac_xxx-20c35bf0b41948689b5bae72ab59bdb4-vp
Contains information about the polishing medium used during the process.
Polishing Medium Information
Contains information describing a polishing medium.
Polishing Medium
Class representing the physical process of polishing of a specimen with the aim of changing its surface characteristics.
Polishing
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ult_cle_xxx-192eb37ff24644798963cd87107e9a5f-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/pol_mac_xxx-20c35bf0b41948689b5bae72ab59bdb4-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/gri_mac_xxx-b0492ca6bf9043909ee541221a225895-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/mak_xxx_xxx-85937c1afc674792af65bffa0748aa31-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/pol_med_xxx-2b7335ba9b0143feb2e936545b8ea4e2-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/lub_for_pol-a64e0b5bcd2d44bd8c3d7aa2853007f4-vp
Process Summary (Heat Treatment)
Class containing information about the technical specifications of a tactile probing system.
Probing System
Class containing information about the parameters specific to the process.
Sawing Process Parameters
Class representing a software developed for research processes.
Software
The intial direction of motion when the relative motion sets in.
Starting Direction
Class containing information about the parameters that are put into the involved scientific equipment to run it optimally, but are not directly part of achieving the experimental objectives.
System or Setup Inputs (Tribological Experiment System)
Objects of this class pertain to the category of machines called tactile surface profilometer.
Tactile Surface Profilometer
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tac_sur_pro-ec98dbf380804321bb8aa65a96c41b24-vp
Class containing information about the technical Specifications of a Tribometer
Technical Specifications (Tribometer)
Instances of this class specify the classification type of tool cleaning accessory.
Tool Cleaning Accessory Type
Class containing information about the technical specifications of a tactile profilometer vertical measuring column.
Vertical Measuring Column Subsystem
Object of this class provide information about the mounting base or foundation the measurment equipment sits on. This influences how vibrations created due to an experiment interact with the surroundings and how vibrations from the environment might influence the outcome of an experiment.
Vibration Mitigation Method
Field to specify for which of the general motion axis of a tribometer this subsystem is responsible.
Axis Name
Term containing the ordered list of sequential steps, in terms of parameters, specific to the process.
Cross Section Cutting Steps Array
Class containing information about the spatial dimensions of a block specimen.
Dimensions Information
Term containing information about the parameters specific to the process.
Electropolishing Process Parameters
Describes the sequential order of electropolishing steps.
Electropolishing Steps
Class representing the monitored processes that produce an electropolishing procedure which removes surface layers.
Electropolishing
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ult_cle_xxx-192eb37ff24644798963cd87107e9a5f-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ele_mac_xxx-903f852b9cef4385aaa4a8fef788e7b5-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/mak_xxx_xxx-85937c1afc674792af65bffa0748aa31-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ele_xxx_xxx-bb7ad7a160aa4ffea9a480879ffa0351-vp
Objects of this class pertain to the category of machines called furnace.
Furnace
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/fur_xxx_xxx-c04aefd269c64c6fa2773c318193f2d6-vp
Objects of this class contain information that unequivocally identifies a piece of interfacial lubricating medium.
General Info (Interfacial Lubricating Medium)
General Info (Software)
Objects of this class contain information that unequivocally identifies a specimen.
General Info (Specimen)
Class containing the ordered list of sequential steps, in terms of parameters, specific to the process.
Grinding Steps
Heat Treatment Steps Array
Ingredient of a chemical mixture.
Ingredient
Instances of this class list information on the chosen parameters to define the controllables associated with the delivery of interfacial medium.
Interfacial Medium Settings
Objects of this class act as the immediate medium at the tribological interface, which is not the surrounding medium of the instrument as a whole.
Interfacial Lubricating Medium
Instances of this class list information on the chosen parameters to define the controllables associated with the load for mechanical interaction in the system.
Load Settings
The material class which block specimen fits into best.
Material Category (Block Specimen)
The type of material and the way it is referred to. The friendly way to identify it.
Material Name
Describes the maximum permissible dimensions of the specimen in the machine.
Maximum Specimen Dimensions
The maximum range in which the stage can be moved.
Maximum Stage Range
Instances of this class list information on the chosen parameters to define the relative motion during an experiment.
Motion Parameters
Polishing Process Parameters
Scanning Electron Microscope
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/sca_ele_mic-30855d0d4b6049a6a8fc94f07cdcc312-vp
Specimen Cleaning Steps Array
Class representing the physical process of reducing the amount of residue on a physical object's surfaces.
Specimen Cleaning
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ult_cle_xxx-192eb37ff24644798963cd87107e9a5f-vp
Term containing information about the technical specifications of a scanning electron microscope.
Technical Specifications (Scanning Electron Microscope)
Term containing the information to open/access/read and interprete a *.tif file's contents adequately.
*.tif File Technical Specifications
Class containing information about the technical specifications of a tactile profilometer transverse system.
Transverse Subsystem
Objects of this class pertain to the category of machines that perform tribological experiments as their primary use.
Tribometer
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_xxx_xxx-c98170df4aa14cd38e9ba0d1b94ebdf0-vp
Defines the type of the publication, e.g. thesis or paper.
Type of Publication
Objects of this class pertain to the category of machines called ultrasonic cleaner.
Ultrasonic Cleaner
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ism_xxx_xxx-cd4f36f6200648d294054682584c8e2b-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ult_cle_xxx-192eb37ff24644798963cd87107e9a5f-vp
Variable Experimental Steps Array
Instances of this class contain the information to open/access/read and interprete a *.bin file's contents adequately.
*.bin File Technical Specifications
Instances of this class specify the classification goal of cup grinding step.
Cup Grinding Goal
Class containing information that characterizes the grinding tool.
Cup Grinding Tool Info
The side of the specimen being cut.
Cutting Face Side
Class containing combined information about the parameters that are put into the involved DAQ channels, to run it optimally, but are not directly part of achieving the experimental objectives.
DAQ Used Channel Info
Class representing the monitored processes that produce a (set of) file(s) whose contents could be used for 1D visualization.
Demagnetization
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/dem_pla_xxx-c4882064ea124afab8aae0b78eeae19c-vp
Term containing a collection of metadata, each associated with a file or a series of files, generated as the output of a data processing process and sharing the same metadata.
File (Data Processing)
Instances of this class contain the information to open/access/read and interprete a file's contents adequately.
File Technical Specifications
Instances of this class give first information about file format/structure.
File Type
Objects of this class contain information that unequivocally identifies a piece of equipment.
General Info (Equipment)
Term containing information about subsystems which offer additional functionality to the machine.
Available Subsystems Information
Contains the information describing a tabular data file.
N-Dimensional Tabular Data Specifications
Class containing information about who performed a scientific process, or is responsible for an object.
Operator(s) in Charge
The side on which indicating feature is. Defined by ISO (not US) technical drawing standards.
Orientation Indicating Feature Side
Describes the sequential order of polishing steps.
Polishing Steps Array
Field that holds information about the working principle of a subsystem.
Principle of Motion Delivery
The very basic shape of a block specimen or other geometric element.
Shape
Class containing information about the parameters that are put into the involved scientific equipment to run it optimally.
System or Setup Inputs (Tactile Surface Profilometry)
System or Setup Inputs (Demagnetization)
Class containing information about the technical specifications of a grinding machine.
Technical Specifications (Grinding Machine)
Class containing information about the technical specifications of a piece of interfacial lubricating medium.
Technical Specifications (Interfacial Lubricating Medium)
Term containing information about the technical specifications of a light microscope.
Technical Specifications (Light Microscope)
Class containing information about the technical stadards observed by the piece of interfacial medium.
Technical Standards
The principal tribological side/s of interest. Defined by ISO (not US) technical drawing standards. Valid after a feature and its side have been defined.
Tribological Interest Side(s)
Class containing information about the XY table of a hardness testing system.
XY Table Specifications
Contains the information to open/access/read and interpret an archive file's contents adequately.
Archive File Technical Specifications
Instances of this class contain a collection of metadata records each associated with a file or a series of files sharing the same metadata.
Array Produced File Metadata
Class representing the physical process of cup grinding of a specimen with the aim of changing its surface characteristics. It ends with demounting of the sample/workpiece from the mounting table.
Cup Grinding
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/cup_gri_mac-3136c4f5a61247ca9cf390b86f050459-vp
The port which collects/outputs signal to a DAQ device.
DAQ Connection Port
Class containing information about the parameters specific to the scientific procedure.
Experimental Conditions
Class containing derived information aafter the experiment has finished. All derived information stems from the information recorded in other locations of the record.
Experiment Summary
Term containing a collection of metadata, each associated with a file or a series of files, generated as the output of a tribological experiment and sharing the same metadata.
File (Tribological Experiment)
Objects of this class contain information that describes known information about a process external to the research insitution.
General Info (External Process)
Class representing the physical process of thermal treatment of a specimen with the aim of changing its selfcontained physical characteristcs.
Heat Treatment
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/fur_xxx_xxx-c04aefd269c64c6fa2773c318193f2d6-vp
Contains information about the beams available in the machine.
Beams Information
Class containing information about the specimen mounting in a cup grinding machine.
Specimen Mounting Specifications
Class containing information about the technical Structural Specifications of a Tribometer
Structural Information
Term containing information about the technical specifications of a wire saw.
Technical Specifications (Wire Saw)
Term containing information about the technical specifications of the wire
Wire Specifications
The type of the box. E.g., Cleaning Cross Section, Regular Cross Section, Rectangle.
Box Type
Cup Grinding Steps Array
Instances of this class specify the model of cup grinding tool.
Cup Grinding Tool ID
Electron Microscopy
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/sca_ele_mic-30855d0d4b6049a6a8fc94f07cdcc312-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/que_xxx_xxx-dc882ce905ba4dfbb3a906b1c1b0cdad-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/opt_mic_xxx-c73af6d31f314907b33d212d43f61891-vp
Class representing the monitored processes that produce a (set of) file(s) with various types whose contents indicate the hardness of a speciment based on indentation measurement.
Hardness Measurement
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/har_tes_xxx-d1fe762442144018958df899aaffe37d-vp
The principle by which a sensor operates.
Measurement Principle
The official name of the software under which it's distributed.
Software Name
Instances of this class specify the classification type of specimen cleaning procedure.
Specimen Cleaning Procedure Type
System or Setup Inputs (Hardness Measurement)
Tactile Surface Profilometry
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tac_sur_pro-ec98dbf380804321bb8aa65a96c41b24-vp
Class containing information about the technical specifications of a bandsaw.
Technical Specifications (Band Saw)
Term containing information about the technical specifications of an electropolishing machine.
Technical Specifications (Electropolishing Machine)
Class containing information about the electron microscopy session.
Process Summary (Electron Microscopy)
Grinding Process Parameters
Class containing information that gives information on the infeed parameters in this grinding step.
Infeed Info
Class containing information about the installed subsystems responsible for making parts move in the tribometer.
Motion Inducing Subsystems Info Array
Instances of this class specify the way samples were mounted and — consequently — oriented to one another at the beginning of the experiment.
Mounting Information Array
Class representing the monitored processes that produce a (set of) file(s) whose contents could be used for visualization.
Optical Surface Profilometry
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/opt_sur_pro-9658f444fa7b4e6b8ebf0c678491e2c0-vp
The method (principle) of load application. For Tribometers, the way the normal load is applied can have a big influence on the tribologically induced processes in the frictional contact and the long-term evolution of the tribo-system (e.g. due to wear).
Principle of Load Application
Class containing information about the technical specifications of a ultrasonic cleaner.
Technical Specifications (Ultrasonic Cleaner)
Information about a user's role inside an institution's structure.
User Role
Class containing information about all the installed sensors detecting physical quantities during the course of an experiment. These can be force sensors, distance sensors, acoustic transducers etc.
Array of Info on Sensors
Way of clamping of a physical object with the role of being a base body (specimen) in a tribometer.
Base Body Clamping Method
Way of of clamping of a physical object.
Clamping Method
Way of clamping of a physical object with the role of being a counter body (specimen) in a tribometer.
Counter Body Clamping Method
Objects of this class contain information that unequivocally identifies the process.
General Info (Process)
The version of a particular software.
Software Version
Class containing information about the technical specifications of a cup grinding machine.
Technical Specifications (Cup Grinding Machine)
Contains the information about the content of tabular data file (what information is stored and how to interpret it).
Tabular Data Contents Specifications
Class representing the physical process of separating metal bodies for eventual use in scientific process or equipment.
Metal Sawing
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/ban_saw_xxx-12c7e62cfce14dc783d3015895fc400e-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/wir_saw_xxx-25611f86ae4d460a9747e0f5c301d8a0-vp, https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/saw_bla_xxx-99b624c642ed43b1b6cf21cb17b7ceb6-vp
Class containing information about the technical specifications of a demagnetizing plate.
Technical Specifications (Demagnetizing Plate)
Class containing information about the technical specifications of a furnace.
Technical Specifications (Furnace)
System or Setup Inputs (Optical Surface Profilometry)
Class containing information about the technical specifications of a optical surface profilometer.
Technical Specifications (Optical Surface Profilometer)
Term containing information about the technical specifications of a polishing machine.
Technical Specifications (Polishing Machine)
Class representing the monitored processes that produce a (set of) wear track(s) on or below a physical surface.
Tribological Experiment
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/emp_xxx_xxx-b0c09f9f6cd948839bac12aa4a2ad55d-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/tri_xxx_xxx-c98170df4aa14cd38e9ba0d1b94ebdf0-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/mak_xxx_xxx-85937c1afc674792af65bffa0748aa31-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/int_med_xxx-49981b08aa8e441ba36e6fe7e3760a0a-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/str_xxx_xxx-38d3d4c5680f48e3990540545f2079b0-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/str_xxx_xxx-cb318eeeefba400e84a04629fbd58e2a-vp: https://purls.helmholtz-metadaten.de/vp/kitmtxx-41732562-vp/blo_spe_xxx-ae137cec891644ec9e9d131be42ef67c-vp
Class containing information about the technical specifications of a hardness testing system.
Technical Specifications (Hardness Testing System)
Class containing the periphery's role/s in a tribometer.
Equipment Role
The "unique identifier" of the room in which a process occurs or an object resides.
Room Number
Instances of this class specify the purpose of generation of a specific output file during conduction of the experiment. Free text allowed.
File(s) Purpose
Instances of this class lock the meaning of a magnitude. Their purpose is to indicate the conversion target.
Target Unit of Conversion
Instances of this class lock the meaning of a magnitude.
Unit of Measure
The official name of the insitution where the object was manufactured.
Company or Vendor Name
The model name of equipment/object, which the company has given to its product.
Equipment or Product Model
Materials Tribology Lab at KIT