[1]	Xie, Tianyu, Phillip Visintin, Xinyu Zhao, and Rebecca Gravina. “Mix Design and Mechanical Properties of Geopolymer and Alkali Activated Concrete: Review of the State-of-the-Art and the Development of a New Unified Approach.” Construction and Building Materials 256 (September 30, 2020): 119380. https://doi.org/10.1016/j.conbuildmat.2020.119380.
[2]	Hardjito, Djwantoro, and B. Rangan. “Development and Properties of Low-Calcium Fly Ash Based Geopolymer Concrete,” January 1, 2005.
[3]	Fernandez-Jimenez, Ana M., Angel Palomo, and Cecilio Lopez-Hombrados. “Engineering Properties of Alkali-Activated Fly Ash Concrete.” Materials Journal 103, no. 2 (March 1, 2006): 106–12. https://doi.org/10.14359/15261.
[4]	Sumajouw, M D J, and B V Rangan. “LOW-CALCIUM FLY ASH-BASED GEOPOLYMER CONCRETE: REINFORCED BEAMS AND COLUMNS,” (2006)
[5]	Olivia, Monita, Hamid Nikraz, and Prabir Sarker. “IMPROVEMENTS IN THE STRENGTH AND WATER PENETRABILITY OF LOW CALCIUM FLY ASH BASED GEOPOLYMER CONCRETE,” 2008.
[6]	Adam, Andi Arham. “Strength and Durability Properties of Alkali Activated Slag and Fly Ash-Based Geopolymer Concrete,” 2009
[7]	Reddy, B. Siva Konda. “Strength and Workability of Low Lime Fly-Ash Based Geopolymer Concrete.” Indian Journal of Science and Technology 3, no. 12 (December 20, 2010): 1188–89. https://doi.org/10.17485/ijst/2010/v3i12.11.
[8]	Wongpa, J., K. Kiattikomol, C. Jaturapitakkul, and P. Chindaprasirt. “Compressive Strength, Modulus of Elasticity, and Water Permeability of Inorganic Polymer Concrete.” Materials & Design 31, no. 10 (December 2010): 4748–54. https://doi.org/10.1016/j.matdes.2010.05.012.
[9]	Ahmed, M Fareed, M Fadhil Nuruddin, and Nasir Shafiq. “Compressive Strength and Workability Characteristics of Low-Calcium Fly Ash-Based Self-Compacting Geopolymer Concrete.” International Journal of Civil and Environmental Engineering 5, no. 2 (2011).
[10]	E.I. Diaz-Loya, E.N. Allouche, S. Vaidya, Mechanical properties of fly-ash based geopolymer concrete, ACI Mater. J. 108 (3) (2011) 300.
[11]	Memon, Fareed Ahmed, Muhd Fadhil Nuruddin, Samuel Demie, and Nasir Shafiq. “Effect of Curing Conditions on Strength of Fly Ash-Based Self-Compacting Geopolymer Concrete.” International Journal of Civil and Environmental Engineering 5, no. 8 (2011).
[12]	Nuruddin, Muhd Fadhil, Samuel Demie, and Nasir Shafiq. “Effect of Mix Composition on Workability and Compressive Strength of Self-Compacting Geopolymer Concrete.” Canadian Journal of Civil Engineering 38, no. 11 (November 2011): 1196–1203. https://doi.org/10.1139/l11-077.
[13]	Olivia, Monita, and Hamid R Nikraz. “Strength and Water Penetrability of Fly Ash Geopolymer Concrete” 6, no. 7 (2011).
[14]	Pan, Zhu, Jay G. Sanjayan, and B. Vijay Rangan. “Fracture Properties of Geopolymer Paste and Concrete.” Magazine of Concrete Research 63, no. 10 (October 2011): 763–71. https://doi.org/10.1680/macr.2011.63.10.763.
[15]	Bernal, Susan A., Ruby Mejía de Gutiérrez, and John L. Provis. “Engineering and Durability Properties of Concretes Based on Alkali-Activated Granulated Blast Furnace Slag/Metakaolin Blends.” Construction and Building Materials 33 (August 2012): 99–108. https://doi.org/10.1016/j.conbuildmat.2012.01.017.,
[16]	Chi, Maochieh. “Effects of Dosage of Alkali-Activated Solution and Curing Conditions on the Properties and Durability of Alkali-Activated Slag Concrete.” Construction and Building Materials 35 (October 2012): 240–45. https://doi.org/10.1016/j.conbuildmat.2012.04.005.
[17]	Joseph, Benny, and George Mathew. “Influence of Aggregate Content on the Behavior of Fly Ash Based Geopolymer Concrete.” Scientia Iranica 19, no. 5 (October 2012): 1188–94. https://doi.org/10.1016/j.scient.2012.07.006.
[18]	Kusbiantoro, Andri, Muhd Fadhil Nuruddin, Nasir Shafiq, and Sobia Anwar Qazi. “The Effect of Microwave Incinerated Rice Husk Ash on the Compressive and Bond Strength of Fly Ash Based Geopolymer Concrete.” Construction and Building Materials 36 (November 2012): 695–703. https://doi.org/10.1016/j.conbuildmat.2012.06.064.
[19]	Olivia, Monita, and Hamid Nikraz. “Properties of Fly Ash Geopolymer Concrete Designed by Taguchi Method.” Materials & Design (1980-2015) 36 (April 2012): 191–98. https://doi.org/10.1016/j.matdes.2011.10.036.
[20]	Demie, Samuel, Muhd Fadhil Nuruddin, and Nasir Shafiq. “Effects of Micro-Structure Characteristics of Interfacial Transition Zone on the Compressive Strength of Self-Compacting Geopolymer Concrete.” Construction and Building Materials 41 (April 2013): 91–98. https://doi.org/10.1016/j.conbuildmat.2012.11.067.
[21]	Jeyasehar, C Antony, G Saravanan, M Salahuddin, and S Thirugnanasambandam. “DEVELOPMENT OF FLY ASH BASED GEOPOLYMER PRECAST CONCRETE ELEMENTS,” Asian J. Civil Eng. (BHRC) 14 (4) (2013) 605–615.
[22]	Kar, Arkamitra, and Udaya B Halabe. “NONDESTRUCTIVE CHARACTERIZATIONS OF ALKALI ACTIVATED FLY ASH AND/OR SLAG CONCRETE,” Eur. Sci. J. 9 (24) (2013).
[23]	Sundar Kumar, S., et al. "Development and Determination of Mechanical properties of fly ash and slag blended geo polymer concrete." International Journal of Scientific & Engineering Research 4.8 (2013).
[24]	Lee, N.K., and H.K. Lee. “Setting and Mechanical Properties of Alkali-Activated Fly Ash/Slag Concrete Manufactured at Room Temperature.” Construction and Building Materials 47 (October 2013): 1201–9. https://doi.org/10.1016/j.conbuildmat.2013.05.107.
[25]	Memon, Fareed Ahmed, Muhd Fadhil Nuruddin, Sadaqatullah Khan, Nasir Shafiq, and Tehmina Ayub. “Effect Of Sodium Hydroxide Concentration On Fresh Properties And Compressive Strength Of Self-Compacting Geopolymer Concrete” 8 (2013).
[26]	Memon, Fareed Ahmed, Muhd Fadhil Nuruddin, and Nasir Shafiq. “Effect of Silica Fume on the Fresh and Hardened Properties of Fly Ash-Based Self-Compacting Geopolymer Concrete.” International Journal of Minerals, Metallurgy, and Materials 20, no. 2 (February 2013): 205–13. https://doi.org/10.1007/s12613-013-0714-7.
[27]	Patankar, Subhash V., Sanjay S. Jamkar, and Yuwaraj M. Ghugal. “Effect Of Water-To-Geopolymer Binder Ratio On The Production Of Fly Ash Based Geopolymer Concrete.” International Journal of Advanced Technology in Civil Engineering, October 2012, 296–300. https://doi.org/10.47893/IJATCE.2012.1048.
[28]	Rashad, A M. “Properties Of Alkali-Activated Fly Ash Concrete Blended With Slag” 10, no. 1 (2013). Iran J. Mater. Sci. Eng. 10 (1) (2013) 57–64.
[29]	Sarker, Prabir K., Rashedul Haque, and Karamchand V. Ramgolam. “Fracture Behaviour of Heat Cured Fly Ash Based Geopolymer Concrete.” Materials & Design 44 (February 2013): 580–86. https://doi.org/10.1016/j.matdes.2012.08.005.
[30]	Shrestha, Preeti. “Development Of Geopolymer Concrete For Precast Structures,”. The University of Texas at Arlington (2014).
[31]	Vora, Prakash R., and Urmil V. Dave. “Parametric Studies on Compressive Strength of Geopolymer Concrete.” Procedia Engineering 51 (2013): 210–19. https://doi.org/10.1016/j.proeng.2013.01.030.
[32]	Barnard, Ryno. "Mechanical properties of fly ash/slag based geopolymer concrete with the addition of macro fibres." M. Eng. Thesis, Stellenbosch Un., South Africa (2014).
[33]	Brandão Ferreira, Luís Filipe, Hugo Sérgio Sousa Costa, Inês Isabel Antunes Barata, Eduardo Nuno Brito Santos Júlio, Paulo Maranha Nunes Tiago, and Jorge Fernando Jordão Coelho. “Precast Alkali-Activated Concrete towards Sustainable Construction.” Magazine of Concrete Research 66, no. 12 (June 2014): 618–26. https://doi.org/10.1680/macr.13.00091.
[34]	Krishnaraja, A R, N P Sathishkumar, T Sathish Kumar, and P Dinesh Kumar. “Mechanical Behaviour of Geopolymer Concrete under Ambient Curing.” International Journal of Scientific Engineering and Technology, 2014.
[35]	Kumar, Chandan. “Strength Characteristics of Low Calcium Fly Ash Based Geopolymer Concrete.” IOSR Journal of Engineering 4, no. 5 (May 2014): 07–17. https://doi.org/10.9790/3021-04570717.
[36]	Nagral, Mohammed Rabbani, Tejas Ostwal, and Manojkumar V Chitawadagi. “Effect Of Curing Temperature And Curing Hours On The Properties Of Geo-Polymer Concrete,” Int. J. Comput. Eng. Res. 4 (9) (2014) 1–11.
[37]	Nath, Pradip, and Prabir Kumar Sarker. “Effect of GGBFS on Setting, Workability and Early Strength Properties of Fly Ash Geopolymer Concrete Cured in Ambient Condition.” Construction and Building Materials 66 (September 2014): 163–71. https://doi.org/10.1016/j.conbuildmat.2014.05.080.
[38]	Kathirvel, Parthiban, and Saravana K. “Effect of Sodium Hydroxide Concentration and Alkaline Ratio on the Compressive Strength of Slag Based Geopolymer Concrete.” International Journal of ChemTech Research 6 (July 1, 2014): 974–4290.
[39]	Yusuf, Moruf Olalekan, Megat Azmi Megat Johari, Zainal Arifin Ahmad, and Mohammed Maslehuddin. “Effects of H2O/Na2O Molar Ratio on the Strength of Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash Based Concrete.” Materials & Design (1980-2015) 56 (April 2014): 158–64. https://doi.org/10.1016/j.matdes.2013.09.078.
[40]	Yusuf, Moruf Olalekan, Megat Azmi Megat Johari, Zainal Arifin Ahmad, and Mohammad Maslehuddin. “Evolution of Alkaline Activated Ground Blast Furnace Slag–Ultrafine Palm Oil Fuel Ash Based Concrete.” Materials & Design 55 (March 2014): 387–93. https://doi.org/10.1016/j.matdes.2013.09.047.
[41]	Yusuf, Moruf Olalekan, Megat Azmi Megat Johari, Zainal Arifin Ahmad, and Mohammad Maslehuddin. “Influence of Curing Methods and Concentration of NaOH on Strength of the Synthesized Alkaline Activated Ground Slag-Ultrafine Palm Oil Fuel Ash Mortar/Concrete.” Construction and Building Materials 66 (September 2014): 541–48. https://doi.org/10.1016/j.conbuildmat.2014.05.037.
[42]	Albitar, M., P. Visintin, M. S. Mohamed Ali, and M. Drechsler. “Assessing Behaviour of Fresh and Hardened Geopolymer Concrete Mixed with Class-F Fly Ash.” KSCE Journal of Civil Engineering 19, no. 5 (July 2015): 1445–55. https://doi.org/10.1007/s12205-014-1254-z.
[43]	Aravindan, S. “Experimental Investigation Of Alkali-Activated Slag And Flyash Based Geopolymer Concrete” 10, no. 10 (2015). ARPN J. Eng. Appl. Sci. 10 (10) (2015) 4701–4705.
[44]	Behfarnia, K, M Shojaei, and R Mohebi. “Compressive Strength And Flexural Strength Of Alkali-Activated Slag Concrete Designed By Taguchi Method,” Asian J. Civ. Eng. 4 (16) (2015) 505–513.
[45]	Bidwe, Shivaji S, and Ajay A Hamane. “Effect of Different Molarities of Sodium Hydroxide Solution on the Strength of Geopolymer Concrete.” American Journal of Engineering Research, 2015.
[46]	M. Gunasekara, D.W. Law, S. Setunge, A comparative study of durability characteristics and microstructure of five different fly ash based geopolymer concretes, 14th International Congress on the Chemistry of Cement (ICCC 2015), 2015, pp. 13-16.
[47]	Nath, Pradip, and Prabir Kumar Sarker. “Use of OPC to Improve Setting and Early Strength Properties of Low Calcium Fly Ash Geopolymer Concrete Cured at Room Temperature.” Cement and Concrete Composites 55 (January 2015): 205–14. https://doi.org/10.1016/j.cemconcomp.2014.08.008.
[48]	Okoye, F.N., J. Durgaprasad, and N.B. Singh. “Mechanical Properties of Alkali Activated Flyash/Kaolin Based Geopolymer Concrete.” Construction and Building Materials 98 (November 2015): 685–91. https://doi.org/10.1016/j.conbuildmat.2015.08.009.
[49]	Omar, O M, and G D Abd Elhameed. “Effect of Crashed Stone on Properties of Fly Ash Based-Geopolymer Concrete with Local Alkaline Activator in Egypt.” International Journal of Civil and Environmental Engineering 9, no. 10 (2015).
[50]	Kathirvel, Parthiban, and Vaithianathan S. “Effect of Kaolin Content and Alkaline Concentration on the Strength Development of Geopolymer Concrete.” International Journal of ChemTech Research 8 (August 1, 2015): 974–4290.
[51]	P.V. Ramani, P.K. Chinnaraj, Geopolymer concrete with ground granulated blast furnace slag and black rice husk ash, Gradevinar 67 (08.) (2015) 741–748.
[52]	Shojaei, Mohammad, Kiachehr Behfarnia, and Reza Mohebi. “Application of Alkali-Activated Slag Concrete in Railway Sleepers.” Materials & Design 69 (March 2015): 89–95. https://doi.org/10.1016/j.matdes.2014.12.051.
[53]	Topark-Ngarm, Pattanapong, Prinya Chindaprasirt, and Vanchai Sata. “Setting Time, Strength, and Bond of High-Calcium Fly Ash Geopolymer Concrete.” Journal of Materials in Civil Engineering 27, no. 7 (July 2015): 04014198. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001157.
[54]	Vignesh, P, and K Vivek. “An Experimental Investigation On Strength Parameters Of Flyash Based Geopolymer Concrete With Ggbs” 02, No. 02 Int. Res. J. Eng. Technol. 2 (02)  (2015).
[55]	Wardhono, Arie. “The Durability of Fly Ash Geopolymer and Alkali-Activated Slag Concretes,” School of Civil Environmental and Chemical Engineering, RMIT University, 2014.
[56]	Xie, Tianyu, and Togay Ozbakkaloglu. “Behavior of Low-Calcium Fly and Bottom Ash-Based Geopolymer Concrete Cured at Ambient Temperature.” Ceramics International 41, no. 4 (May 2015): 5945–58. https://doi.org/10.1016/j.ceramint.2015.01.031.
[57]	Abhilash, P., C. Sashidhar, and I. Ramana Reddy. "Strength properties of Fly ash and GGBS based Geo-polymer Concrete." Int. J. ChemTech Res 9.3 (2016): 350-356.
[58]	Aliabdo, Ali A., Abd Elmoaty M. Abd Elmoaty, and Hazem A. Salem. “Effect of Cement Addition, Solution Resting Time and Curing Characteristics on Fly Ash Based Geopolymer Concrete Performance.” Construction and Building Materials 123 (October 2016): 581–93. https://doi.org/10.1016/j.conbuildmat.2016.07.043.
[59]	Aliabdo, Ali A., Abd Elmoaty M. Abd Elmoaty, and Hazem A. Salem. “Effect of Water Addition, Plasticizer and Alkaline Solution Constitution on Fly Ash Based Geopolymer Concrete Performance.” Construction and Building Materials 121 (September 2016): 694–703. https://doi.org/10.1016/j.conbuildmat.2016.06.062
[60]	Assi, Lateef N., Edward (Eddie) Deaver, Mohamed K. ElBatanouny, and Paul Ziehl. “Investigation of Early Compressive Strength of Fly Ash-Based Geopolymer Concrete.” Construction and Building Materials 112 (June 2016): 807–15. https://doi.org/10.1016/j.conbuildmat.2016.03.008.
[61]	Castel, Arnaud, and Stephen J. Foster. “Bond Strength between Blended Slag and Class F Fly Ash Geopolymer Concrete with Steel Reinforcement.” Cement and Concrete Research 72 (June 2015): 48–53. https://doi.org/10.1016/j.cemconres.2015.02.016.
[62]	Haddad, Rami H., and Odey Alshbuol. “Production of Geopolymer Concrete Using Natural Pozzolan: A Parametric Study.” Construction and Building Materials 114 (July 2016): 699–707. https://doi.org/10.1016/j.conbuildmat.2016.04.011.
[63]	Jawahar, J Guru, and G Mounika. “Strength Properties Of Fly Ash And Ggbs Based Geo Polymer Concrete,” Asian J. Civil Eng. 17 (1) (2016) 127–135.
[64]	Muthadhi, A., J. Vanjinathan, and D. Durai. “Experimental Investigations on Geo Polymer Concrete Based on Class C Fly Ash.” Indian Journal of Science and Technology 9, no. 5 (March 22, 2016). https://doi.org/10.17485/ijst/2016/v9i5/87270.
[65]	Nagalia, Gaurav, Yeonho Park, Ali Abolmaali, and Pranesh Aswath. “Compressive Strength and Microstructural Properties of Fly Ash–Based Geopolymer Concrete.” Journal of Materials in Civil Engineering 28, no. 12 (December 2016): 04016144. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001656.
[66]	Nguyen, Khoa Tan, Namshik Ahn, Tuan Anh Le, and Kihak Lee. “Theoretical and Experimental Study on Mechanical Properties and Flexural Strength of Fly Ash-Geopolymer Concrete.” Construction and Building Materials 106 (March 2016): 65–77. https://doi.org/10.1016/j.conbuildmat.2015.12.033.
[67]	Noushini, Amin, Farhad Aslani, Arnaud Castel, Raymond Ian Gilbert, Brian Uy, and Stephen Foster. “Compressive Stress-Strain Model for Low-Calcium Fly Ash-Based Geopolymer and Heat-Cured Portland Cement Concrete.” Cement and Concrete Composites 73 (October 2016): 136–46. https://doi.org/10.1016/j.cemconcomp.2016.07.004.
[68]	Noushini, Amin, and Arnaud Castel. “The Effect of Heat-Curing on Transport Properties of Low-Calcium Fly Ash-Based Geopolymer Concrete.” Construction and Building Materials 112 (June 2016): 464–77. https://doi.org/10.1016/j.conbuildmat.2016.02.210.
[69]	Okoye, F.N., J. Durgaprasad, and N.B. Singh. “Effect of Silica Fume on the Mechanical Properties of Fly Ash Based-Geopolymer Concrete.” Ceramics International 42, no. 2 (February 2016): 3000–3006. https://doi.org/10.1016/j.ceramint.2015.10.084.
[70]	Pavithra, P., M. Srinivasula Reddy, Pasla Dinakar, B. Hanumantha Rao, B.K. Satpathy, and A.N. Mohanty. “A Mix Design Procedure for Geopolymer Concrete with Fly Ash.” Journal of Cleaner Production 133 (October 2016): 117–25. https://doi.org/10.1016/j.jclepro.2016.05.041.
[71]	Pouhet, R., and M. Cyr. “Formulation and Performance of Flash Metakaolin Geopolymer Concretes.” Construction and Building Materials 120 (September 2016): 150–60. https://doi.org/10.1016/j.conbuildmat.2016.05.061.
[72]	Rajarajeswari, A., and G. Dhinakaran. “Compressive Strength of GGBFS Based GPC under Thermal Curing.” Construction and Building Materials 126 (November 2016): 552–59. https://doi.org/10.1016/j.conbuildmat.2016.09.076.
[73]	Shehab, Hamdy K., Ahmed S. Eisa, and Ahmed M. Wahba. “Mechanical Properties of Fly Ash Based Geopolymer Concrete with Full and Partial Cement Replacement.” Construction and Building Materials 126 (November 2016): 560–65. https://doi.org/10.1016/j.conbuildmat.2016.09.059.
[74]	Shinde, B H, and Dr K N Kadam. “Strength Properties of Fly Ash Based Geopolymer Concrete with Sea Sand.” American Journal of Engineering Research, 2016.
[75]	Singh, B., M.R. Rahman, R. Paswan, and S.K. Bhattacharyya. “Effect of Activator Concentration on the Strength, ITZ and Drying Shrinkage of Fly Ash/Slag Geopolymer Concrete.” Construction and Building Materials 118 (August 2016): 171–79. https://doi.org/10.1016/j.conbuildmat.2016.05.008.
[76]	Venkatesan, R. Prasanna, and K. C. Pazhani. “Strength and Durability Properties of Geopolymer Concrete Made with Ground Granulated Blast Furnace Slag and Black Rice Husk Ash.” KSCE Journal of Civil Engineering 20, no. 6 (September 2016): 2384–91. https://doi.org/10.1007/s12205-015-0564-0.
[77]	R. Vinai, A. Rafeet, M. Soutsos, W. Sha, The role of water content and paste proportion on physico-mechanical properties of alkali activated fly ash–ggbs concrete, J. Sustainable Metall. 2 (1) (2016) 51–61.
[78]	Gunasekara, Chamila, David W. Law, and Sujeeva Setunge. “Long Term Permeation Properties of Different Fly Ash Geopolymer Concretes.” Construction and Building Materials 124 (October 2016): 352–62. https://doi.org/10.1016/j.conbuildmat.2016.07.121.
[79]	Hadi, Muhammad N.S., Nabeel A. Farhan, and M. Neaz Sheikh. “Design of Geopolymer Concrete with GGBFS at Ambient Curing Condition Using Taguchi Method.” Construction and Building Materials 140 (June 2017): 424–31. https://doi.org/10.1016/j.conbuildmat.2017.02.131.
[80]	Hung, Tran Viet. “Study On The Mechanical Properties Of The Fly Ash Geopolymer Concrete,” Int. J. Civ. Eng. Technol. (IJCIET) 8 (3) (2017) 950–957.
[81]	Ibrahim, Mohammed, Megat Azmi Megat Johari, Muhammed Kalimur Rahman, and Mohammed Maslehuddin. “Effect of Alkaline Activators and Binder Content on the Properties of Natural Pozzolan-Based Alkali Activated Concrete.” Construction and Building Materials 147 (August 2017): 648–60. https://doi.org/10.1016/j.conbuildmat.2017.04.163.
[82]	R. Manickavasagam, G. Mohankumar, Study on high calcium flyash based geopolymer concrete, Am. J. Eng. Res. 6 (1) (2017) 86–90.
[83]	Mehta, Ankur, and Rafat Siddique. “Strength and Durability Properties of Low-Calcium Fly Ash Based Geopolymer Concrete,” 2017. https://tudr.thapar.edu:8443/jspui/handle/10266/4943.
[84]	Mehta, Ankur, and Rafat Siddique. “Properties of Low-Calcium Fly Ash Based Geopolymer Concrete Incorporating OPC as Partial Replacement of Fly Ash.” Construction and Building Materials 150 (September 2017): 792–807. https://doi.org/10.1016/j.conbuildmat.2017.06.067.
[85]	Mehta, Ankur, Rafat Siddique, Bhanu Pratap Singh, Salima Aggoun, Grzegorz Łagód, and Danuta Barnat-Hunek. “Influence of Various Parameters on Strength and Absorption Properties of Fly Ash Based Geopolymer Concrete Designed by Taguchi Method.” Construction and Building Materials 150 (September 2017): 817–24. https://doi.org/10.1016/j.conbuildmat.2017.06.066.
[86]	Nath, Pradip, and Prabir Kumar Sarker “Flexural Strength and Elastic Modulus of Ambient-Cured Blended Low-Calcium Fly Ash Geopolymer Concrete.” Construction and Building Materials 130 (January 2017): 22–31. https://doi.org/10.1016/j.conbuildmat.2016.11.034.
[87]	Nath, Pradip, and Prabir Kumar Sarker “Fracture Properties of GGBFS-Blended Fly Ash Geopolymer Concrete Cured in Ambient Temperature.” Materials and Structures 50, no. 1 (February 2017): 32. https://doi.org/10.1617/s11527-016-0893-6.
[88]	Prakash, R. “Mechanical Properties and Flexural Performance of Geopolymer Concrete” Int. Res. J. Eng. Technol. (IRJET) 4 (6) (2017). 
[89]	Rafeet, Ali, Raffaele Vinai, Marios Soutsos, and Wei Sha. “Guidelines for Mix Proportioning of Fly Ash/GGBS Based Alkali Activated Concretes.” Construction and Building Materials 147 (August 2017): 130–42. https://doi.org/10.1016/j.conbuildmat.2017.04.036.
[90]	Ramujee, Kolli., and M. PothaRaju. “Mechanical Properties of Geopolymer Concrete Composites.” Materials Today: Proceedings 4, no. 2 (2017): 2937–45. https://doi.org/10.1016/j.matpr.2017.02.175.
[91]	Sharma, Ajay, and Juned Ahmad. “Experimental Study Of Factors Influencing Compressive Strength Of Geopolymer Concrete” Int. J. Eng. Tech. Res. 4 (5) (2017) 1306–1313.
[92]	Takekar, Ajay, and G R Patil. “Experimental Study On Mechanical Properties Of Fly Ash And Ggbs Based Geopolymer Concrete” Int. Res. J. Eng. Technol. 4 (8) (2017) 18–23.
[93]	Wardhono, Arie, Chamila Gunasekara, David W. Law, and Sujeeva Setunge. “Comparison of Long Term Performance between Alkali Activated Slag and Fly Ash Geopolymer Concretes.” Construction and Building Materials 143 (July 2017): 272–79. https://doi.org/10.1016/j.conbuildmat.2017.03.153.
[94]	Hongen, Zhang, Jiang Feng, Wang Qingyuan, Tang Ling, and Shi Xiaoshuang. “Influence of Cement on Properties of Fly-Ash-Based Concrete.” ACI Materials Journal 114, no. 5 (October 2017). https://doi.org/10.14359/51700793.
[95]	M.S.S. Al-Tais, D. Annapurna, An experimental investigation on volcanic ashbased geopolymer concrete, Int. J. Eng. Technol. Sci. Res. 5 (1) (2018) 1333–1344.
[96]	Chithambaram, S. Jeeva, Sanjay Kumar, Madan M. Prasad, and Dibyendu Adak. “Effect of Parameters on the Compressive Strength of Fly Ash Based Geopolymer Concrete.” Structural Concrete 19, no. 4 (August 2018): 1202–9. https://doi.org/10.1002/suco.201700235.
[97]	Ding, Yao, Cai-Jun Shi, and Ning Li. “Fracture Properties of Slag/Fly Ash-Based Geopolymer Concrete Cured in Ambient Temperature.” Construction and Building Materials 190 (November 2018): 787–95. https://doi.org/10.1016/j.conbuildmat.2018.09.138.
[98]	Fang, Guohao, Wing Kei Ho, Wenlin Tu, and Mingzhong Zhang. “Workability and Mechanical Properties of Alkali-Activated Fly Ash-Slag Concrete Cured at Ambient Temperature.” Construction and Building Materials 172 (May 2018): 476–87. https://doi.org/10.1016/j.conbuildmat.2018.04.008.
[99]	Mallikarjuna Rao, G., and T. D. Gunneswara Rao. “A Quantitative Method of Approach in Designing the Mix Proportions of Fly Ash and GGBS-Based Geopolymer Concrete.” Australian Journal of Civil Engineering 16, no. 1 (January 2, 2018): 53–63. https://doi.org/10.1080/14488353.2018.1450716.
[100]	Mehta, Ankur, and Rafat Siddique.  “Sustainable Geopolymer Concrete Using Ground Granulated Blast Furnace Slag and Rice Husk Ash: Strength and Permeability Properties.” Journal of Cleaner Production 205 (December 2018): 49–57. https://doi.org/10.1016/j.jclepro.2018.08.313.
[101]	K, Nagaraj V., and D.L. Venkatesh Babu. “Assessing the Performance of Molarity and Alkaline Activator Ratio on Engineering Properties of Self-Compacting Alkaline Activated Concrete at Ambient Temperature.” Journal of Building Engineering 20 (November 2018): 137–55. https://doi.org/10.1016/j.jobe.2018.07.005.
[102]	Oyebisi, Solomon, Anthony Ede, Festus Olutoge, Olatokunbo Ofuyatan, and John Oluwafemi. “Influence Of Alkali Concentrations On The Mechanical Properties Of Geopolymer Concrete,” Int. J. Civ. Eng. Technol. 9 (8) (2018) 734–743.
[103]	Phoo-ngernkham, Tanakorn, Chattarika Phiangphimai, Nattapong Damrongwiriyanupap, Sakonwan Hanjitsuwan, Jaksada Thumrongvut, and Prinya Chindaprasirt. “A Mix Design Procedure for Alkali-Activated High-Calcium Fly Ash Concrete Cured at Ambient Temperature.” Advances in Materials Science and Engineering 2018 (2018): 1–13. https://doi.org/10.1155/2018/2460403.
[104]	Rai, Baboo, L. B. Roy, and Manoj Rajjak. “A Statistical Investigation of Different Parameters Influencing Compressive Strength of Fly Ash Induced Geopolymer Concrete.” Structural Concrete 19, no. 5 (October 2018): 1268–79. https://doi.org/10.1002/suco.201700193.
[105]	Reddy, M. Srinivasula, P Dinakar, and B. Hanumantha Rao. “Mix Design Development of Fly Ash and Ground Granulated Blast Furnace Slag Based Geopolymer Concrete.” Journal of Building Engineering 20 (November 2018): 712–22. https://doi.org/10.1016/j.jobe.2018.09.010.
[106]	Zhang, Hongen, Xiaoshuang Shi, and Qingyuan Wang. "Effect of Curing Condition on Compressive Strength of Fly Ash Geopolymer Concrete." ACI Materials Journal 115.2 (2018).
[107]	Aliabdo, Ali A., Abd Elmoaty M. Abd Elmoaty, and Mohammed A. Emam. “Factors Affecting the Mechanical Properties of Alkali Activated Ground Granulated Blast Furnace Slag Concrete.” Construction and Building Materials 197 (February 2019): 339–55. https://doi.org/10.1016/j.conbuildmat.2018.11.086.
[108]	Alsalman, A., Assi, L.N., Kareem, R.S., Carter, K., Ziehl, P., 2021. Energy and CO2 emission assessments of alkali-activated concrete and Ordinary Portland Cement concrete: A comparative analysis of different grades of concrete. Cleaner Environmental Systems 3, 100047. https://doi.org/10.1016/j.cesys.2021.100047
[109]	Yang, K.-H., Song, J.-K., Song, K.-I., 2013. Assessment of CO2 reduction of alkali-activated concrete. Journal of Cleaner Production 39, 265–272. https://doi.org/10.1016/j.jclepro.2012.08.001