Published September 27, 2022 | Version v1
Journal article Open

ACHIEVING ENERGY SAVINGS IN PERFORMING HOLE DRILLING ON MAIN WATER PRESSURE PIPES

  • 1. doctor (PhD) in technical sciences Navoi State Mining and Technological University
  • 2. 4th year student of the Navoi Pedagogical Institute.

Description

Abstract

The main goal of the presented article is to optimize the possibilities of replacing outdated pipeline networks of existing enterprises in our republic, to improve time and quality indicators, and to ensure continuous production process. Creation of a hole-drilling device for connecting an additional pipeline network to surface and underground low-pressure water, oil and gas pipelines passing through the territory of our republic, designing and testing the project in practice, theoretically and mathematically analyzing the parameters of all indicators during the testing process, and finding more optimal method is provided by the current project. In order to prevent the negative effect of the water leaking from the pipe on the welds during the connection of the newly connected low-pressure small-diameter pipe to the low-pressure large-diameter pipes, resulting in the defective bridging of the crystal lattices of the welds. The article mainly provides theoretical information on creating a dry, comfortable workplace for plumbers who repair and install pressure pipes in cold periods of the year.

Notes

References: 1. Anurev V.I. Handbook of industrial constructors: V 3 t. 7-e izd. M.: Mashinostroenie, 1992. 2. Brodsky A.M., Fazlulin E.M., Khaldinov V.A. Engineering graphics – M.; Academy, 2003. 3. Levitsky V.S. Mechanical engineering drawing - M.: Vysshaya shkola, 2000. 4. Popov G.N., Alekseev S.Yu. . Engineering drawing: Reference book - L.; Engineering, 1986. 5. Anukhin V.I. Calculation and assignment of technical requirements for machine parts. Part 1: Proc. allowance / SPbGTU. SPb., 1993. 76 p. 6. Tolerances and assembly: Ref.: In 2 volumes. 7th ed. L.: Politekhnika, 1991. 1184 p. 7. Metal cutting: Technologist's Handbook / A.A. Panov, V.V. Anikin, N.G. Boym and others; Under total ed. A.A. Panov. M. 2004. 784 p. 8. Poletika M.F. Cutting theory. Mechanics of the cutting process. Part 1. Tomsk: TPU Publishing House, 2001. 202 p.

Files

DSJ_64-61-65.pdf

Files (748.6 kB)

Name Size Download all
md5:bb2563ac155acf3cdce56441792da3b5
748.6 kB Preview Download