Nanotyrannus lancensis

CMNH 7541, a damaged skull with lower jaws in occlusion ( Fig. 6A-D), was collected from the Hell Creek Formation of Montana in 1942 and described by C. W. Gilmore (1946) in a posthumous publication. CMNH 7541 was heavily restored in plaster, and Gilmore erred in his account of sutural fusion in the skull, a misinterpretation perpetuated by later workers ( Russell, 1970; Bakker et al., 1988; Paul, 1988). In fact, there is no evidence of sutural fusion in this specimen except for fusion of the intranasal and intraparietal sutures, which is typical of Stage 1 A. libratus. Gilmore noted the similarity of the skull to the smallest specimen of A. libratus then known ( AMNH 5664); thus Gilmore (1946) made CMNH 7541 the holotype of the new taxon, Gorgosaurus lancensis.

In his review of tyrannosaurids from western Canada, Russell (1970) referred ”G”. lancensis to Albertosaurus and accepted Gilmore’s interpretation of sutural fusion and its indication of relative maturity. Later, Bakker et al. (1988:17) proposed a new genus of dwarf tyrannosaurid, Nanotyrannus, for “G.” lancensis, offering sutural fusion between the frontal and prefrontal and between the parietal and frontal as the criteria for the adult nature of the specimen.

Relative Maturity of CMNH 7541

The presence of striated cortical bone was demonstrated by Bennett (1993) and Sampson (1993) to distinguish immature, fast-growing individuals from mature specimens for pterosaurs and centrosaurine ceratopsids, respectively. Immature bone grain is lost with increase in size and development of ontogenetic characters, thus providing a crude measure of relative maturity among reptiles.

On CMNH 7541, immature bone grain is present on the antorbital fossa of the maxilla ( Fig. 7A) and lacrimal, lateral surface of the vomer, dentary, surangular ( Fig. 7C), angular, palatine, jugal ( Fig. 7B), ventral process of the maxilla, quadratojugal process of the squamosal, squamosal ramus of the postorbital, rostral surface of the supraoccipital crest of the parietal, medial surface of the prearticular and splenial, caudal margin of the quadratojugal, caudal surface of the quadrate, and dorsal surface of the frontal and nasals ( Fig. 7D).

In addition, none of the “fusions” (frontal-frontal, frontalprefrontal, nasal-maxilla, nasal-lacrimal, nasal-prefrontal, premaxilla-maxilla, maxilla-lacrimal, maxilla-nasal) claimed by Gilmore (1946) or by Bakker et al. (1988) actually occurs in CMNH 7541. In fact, none of the fusions enumerated above occurs in any tyrannosaurid skulls externally (pers. obs.), except suture closure around the prefrontal varies in some T. rex (Brochu, pers. comm.). Therefore, I regard CMNH 7541 as a Stage 1 specimen on the basis of cortical bone texture, a conclusion consistent with its size (skull length 572 mm). Also, CMNH 7541 exhibits the characters typical of Stage 1 specimens of A. libratus (see Appendix 1).

Premaxilla— In rostral view, the premaxillae are narrow and their lateral margins are concave at the base of the maxillary processes, and the alveolar region is shallow ( Fig. 8J).

Maxilla— The maxillae of CMNH 7541 are laterally flattened, the alveolar process is shallow, the first tooth is incisiform, and the remaining teeth are labiolingually narrow ( Fig. 6A, D). Also, the ventrolateral rim of the ventral jugal process is not breached by the caudalmost neurovascular sulcus of the ventral row of foramina ( Fig. 6A). The lateral surface does not extend caudally over the rostral margin of the antorbital fossa ( Fig. 6A), the promaxillary fenestra is dorsoventrally elongate and not recessed ( Fig. 6A), the antorbital fenestra is longer than high, and the small maxillary fenestra is midway between the rostral margins of the antorbital fossa and restored fenestra ( Fig. 6A).

Nasal— In CMNH 7541, the nasals are smooth with low transverse and fine rostrocaudal ridges ( Fig. 6A, B). In the smallest Stage 1 specimen of A. libratus examined ( TMP 86.144.1), the rugose texture typical of mature specimens is present. The condition in CMNH 7541 might represent individual, ontogenetic, or taxonomic variation.

Lacrimal— In CMNH 7541 the rostral margin of the rostroventral lamina is concave to straight and the contact of the lamina with the jugal exceeds that of the ventral ramus as in Stage 1 A. libratus ( Fig. 6A). Also, there is no evidence of fusion between the ventral margins of the medial and lateral processes of the rostral ramus.

Jugal— As in Stage 1 A. libratus, the maxillary ramus of CMNH 7541 is dorsoventrally shallow and tapered ( Fig. 6A). The jugal pneumatic recess is a rostrally-restricted slit ( Fig. 6A), the postorbital articular surface approaches the orbit floor ( Fig. 6A), the region ventral to the postorbital ramus is convex ( Fig. 6A), the caudal margin of the postorbital ramus is convex at midheight, and the caudal rim of the lacrimal articular surface is subvertical ( Fig. 6A).

Postorbital— As in Stage 1 A. libratus, the laterodorsal margin is not everted medially into the dorsotemporal fenestra ( Fig. 6A, B). There is no postorbital cornual process or suborbital prong ( Fig. 6A); the former is represented by a textured surface. Unlike A. libratus, the rostral and caudal margins of the jugal process taper rostroventrally ( Fig. 6A).

Prefrontal— As in Stage 1 A. libratus specimens, the prefrontal is situated at the rostrolateral margin of the frontal, bounded caudally by a triangular, tab-like process from the frontal to separate it from the lacrimal caudolaterally ( Fig. 6B).

Frontal— As in Stage 1 A. libratus, the lacrimal notch in CMNH 7541 is elongate and narrow in dorsal view, the prefrontal notch is rostrocaudally stout in dorsal view, and the paired frontals are longer than wide ( Fig. 6B). Further evidence of the immature nature of the specimen is provided by the relatively elongate orbital margin (11 mm) and the shallow dorsotemporal fossa, which has a barely discernible rostral margin ( Fig. 6B). Unlike Stage 1 A. libratus, the frontals appear to rise to meet each other along the midline rostral to the dorsotemporal fossa ( Fig. 6B); however, cracks suggest this may be an artifact of dorsoventral crushing.

Parietal— In CMNH 7541 the delicate nuchal crest is low in caudal view ( Fig. 6C). Its dorsal margin is rostrally everted and the laterodorsal margin is convex in frontal section ( Fig. 6A, B). Unlike Stage 1 A. libratus, the sagittal crest in lateral view is tall and blade-like.

Ectopterygoid— In CMNH 7541, unlike Stage 1 A. libratus, the ectopterygoid is inflated, except for the jugal ramus ( Fig. 6D). As in Stage 1 A. libratus, the muscle scar on the jugal ramus is caudolaterally positioned.

Supraoccipital— As in Stage 1 A. libratus, the dorsal process of the supraoccipital of CMNH 7541 is narrow and has a horizontal dorsal border with flange-like rostrolateral edges ( Fig. 6C).

Basioccipital— As in Stage 1 A. libratus, the ventrolateral margins of the occipital condyle taper toward each other ventrally and the caudoventral condylar surface is flattened ( Fig. 6C). The ventral surface of the basituberal web is flat and arched in caudal view ( Fig. 6C). The median portion of the basioccipital is concave between the laminae and the bone is strongly excavated caudolaterally by the subcondylar recess ( Fig. 6C).

Parabasisphenoid— As in Stage 1 A. libratus, the pneumatic foramina in the basisphenoid are small and situated ventrally and the oval scar is smooth and lateroventrally oriented ( Fig. 6C, D).

Dentary— As in Stage 1 A. libratus the dentary of CMNH 7541 is relatively shallow in lateral view and narrow in ventral view ( Fig. 6A, D).

Surangular— In CMNH 7541 the surangular is shallow and the surangular shelf is horizontal ( Fig. 6C).

Prearticular— As in Stage 1 A. libratus the dorsal margin of the caudal ramus of the prearticular is restricted caudally ( Fig. 6D), the caudal ramus is shallow with parallel dorsal and ventral margins ( Fig. 6D), the rostral lamina is slightly expand­ ed and its parallel margins converge to a point distally ( Fig. 6D), and the caudodorsal surface of the rostral lamina is smooth ( Fig. 6D).

CONCLUSIONS

Immaturity of CMNH 7541

The morphological structure of CMNH 7541 agrees with that of Stage 1 specimens of A. libratus and displays no mature features. The weight of evidence indicates that CMNH 7541 is juvenile. The presence of immature bone grain ( Fig. 7) precludes the specimen from representing an adult pygmy tyrannosaurid.

Status of Nanotyrannus— Rozhdestvensky (1965) first suggested that CMNH 7541 might be a juvenile Tyrannosaurus rex, based on his observations of T. bataar, in which juveniles vary in “slightly different proportions than in the large specimens, as we should expect if they are of different (ontogenetic) ages” ( Rozhdestvensky, 1965:106).

Carpenter (1992) also suggested that CMNH 7541 might be an immature specimen of T. rex on the basis of its long and low snout, separate nasals and frontal, circular orbit, and rostrocaudally oval margin of the antorbital fenestra. Carpenter was uncertain of the significance of the last feature, owing to its acute rostral margin relative to that in immature specimens of T. bataar. In fact, on both sides, this region is absent and restored in plaster in CMNH 7541. Carpenter’s suggestion concerning ontogenetically variable features, except for the nasalfrontal contact, is consistent with the observations reported here. He noted two features that united the specimen with Tyrannosaurus: considerable lateral constriction of the snout, and a dorsally broad temporal region ( Fig. 8C, D). However, Carpenter (1992:528) tentatively accepted Russell’s identification of CMNH 7541 as? A. lancensis.

CMNH 7541, and specimens referred to T. rex, share the following characters: (1) nasal processes of the premaxillae tightly appressed throughout their entire length ( Fig. 8I, J); (2) restricted exposure of the jugal within the antorbital fenestra ( Fig. 8E, F); (3) antorbital fossa reaches the nasal suture caudodorsally ( Fig. 8E, F); (4) transversely broad jugal pneumatic recess ( Fig. 8C, D); (5) elongate frontal sagittal crest ( Fig. 8C, D); (6) strongly divergent and short basal tubers ( Fig. 8G, H); (7) rostroventrally-oriented caudal occipital plate ( Fig. 8A, B); (8) shallow subcondylar recess ( Fig. 8G, H); (9) rostroventrally deep basisphenoid plate and rostrocaudally-restricted basisphenoid recess ( Fig. 8A, B, G, H); (10) inflated ectopterygoid ( Fig. 8A, B); (11) strongly convex rostral plate of the surangular ( Fig. 8E, F); (12) transversely narrow snout and broad temporal region relative to other tyrannosaurids ( Fig. 8C, D) ( Carpenter, 1992); and (13) deep mandible relative to other tyrannosaurids ( Fig. 8E, F). Given the low number of specimens of T. bataar examined first-hand for this study, it is conceivable that some of these characters may be generic synapomorphies. Based on the close morphological similarities between the skull of CMNH 7541 and large T. rex skulls, I thus consider Nanotyrannus lancensis Bakker et al., 1988 a subjective junior synonym of Tyrannosaurus rex Osborn, 1905.