3D Universe README

The files associated with the Cosmic Sculpture 3D Universe project supplied here are as follows:

128_scaled.stl - STL file used for printing the monochrome version of the project as shown in Fig. 4 of the paper

cmbhollow.wrl - VRML file used for printing the hollow coloured version of the project as shown in Fig. 5 of the paper

3Dprinting.mov - movie file showing an Ulitmaker2 printing the monochrome version of the project

EarthFinalShrink.wrl - WRL file for printing a topographic globe of the Eath. Features include both surface (eg. mountains, land) and sub-oceanic topography (eg. continental shelf and abyssal planes). Credit for this work should be to J. Styman, L. D’Arcy and D.L. Clements

Earth_Colour.ply - PLY file used for printing a hollow coloured topographic globe of the Eath. Features include both surface (eg. mountains, land) and sub-oceanic topography (eg. continental shelf and abyssal planes). Credit for this work should be to J. Styman, L. D’Arcy and D.L. Clements

Useage:

These files are made available under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International license.

Please reference Clements, Sato and Portela Fonseca, 2017, EJPyhs, 38, 5601 whenever the CMB related files files are used.

Please credit J. Styman, L. D’Arcy and D.L. Clements and reference Clements, Sato and Portela Fonseca 2017, EJPyhs, 38, 5601 whenever the Earth files are used.

Commercial use of these files or works derived from them is not permitted. The rights to commercial use are reserved by the originators of this work.