REM - For mesh generation, Ansys ICEM CFD (2022) must be installed

del *.vtk
del *.vtu
del *.pvd
del *.tin
del fault_mid_point_time_history.txt
del Fault_seismic_moment.txt
del Time_step_control.txt
del generated_fractures.txt
del ASP_*.txt
del RAS_*.txt
del LINE_*.txt
del simulation_*.txt
del out*
del output*.txt
del report_*.txt
del fracture_*.txt
del MasterSlaves*
del mode*.txt
del initial_guess.txt
del nastran*
del Material_*.txt
del PointSource_rhsop_Acc.txt
del run_count_forSolveFEM.txt
del friction_checkpoint.txt
del Stress_Strain.txt
del *.par
del tetra_cmd.log
del *.rpl
del Runtime.log
del CSP_variables.dat

set MKL_PARDISO_OOC_MAX_CORE_SIZE=10000000
set MKL_PARDISO_OOC_MAX_SWAP_SIZE=34500000

set rhino=Box900m_V3
set run=ICGT2.0250701
set faultfile=Fault_Geometry_900.txt

set fault_flags=-fracture_setup %faultfile% 

REM Young's Modulus - Poisson's ratio - Density
set material_flags=-ym 80.1e9 -pr 0.25 -solid_density 2670.0 

REM Rate and State Parameters
set ras_flags=-friction -ras -mu 0.6 -a_param 0.016 -b_param 0.01 -dc 0.5e-3 -v0 1.0e-6  

REM Rate and State Parameters for Asperity
set asperity_flags=-asperity -asperity_radius 200.0 -asperity_a_parameter 0.004 -asperity_b_parameter 0.01

REM Boundary Conditions
set bc_flags=-bc RASValidation_BCT -msy 25.0 

REM Time Step Control
set dt_flags=-dt 5.0e8 -dt_max 1.0e25 -dt_min 0.01 -simulation_time 6.0e8  

REM 
set setup_flags= -load_rhino %rhino% -solid_deformation
%run%.exe %material_flags% %fault_flags% %asperity_flags% %ras_flags% %bc_flags% %dt_flags% %setup_flags%