MFMET A2.4.4 technical report describing the design, fabrication, and calibration process of the transfer standards
Creators
- 1. IMTAG
-
2.
Centre Technique des Industries Aérauliques et Thermiques
-
3.
Instituto Português Da Qualidade
-
4.
Danish Technological Institute
-
5.
Laboratoire National de Métrologie et d'Essais
-
6.
University of Glasgow
-
7.
CEA LETI
-
8.
Microfluidic ChipShop (Germany)
-
9.
United States Food and Drug Administration
-
10.
Micronit Microfluidics (Netherlands)
-
11.
Instituto de Engenharia de Sistemas e Computadores Microsistemas e Nanotecnologias
Description
The objective of this document is to present the results of the tests on the golden standard samples, both glass and polymer standards. Additionally, the design and fabrication of the standards will be explained in detail. The tests protocols have been defined in A2.4.3 and various members of the project conducted these tests, according to their testing capabilities.
|
Activity description |
Partners |
|
|
A2.4.4 M35 |
Using input from A2.4.1-A2.4.3, IMTAG with support from CETIAT, LNE and microfluidic will produce a technical report describing the design, fabrication, and calibration process of the transfer standards and share this report in the relevant standardisation group such as CEN/TC332/WG7 and/or ISO/TC48/WG3. |
IMTAG, CETIAT, LNE, microfluidic |
Further readings can be found at https://mfmet.eu/publications
The project (20NRM02 MFMET) have received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme.
Files
MFMET A2.4.4 technical report describing the design, fabrication, and calibration process of the transfer standards.pdf
Files
(7.0 MB)
| Name | Size | Download all |
|---|---|---|
|
md5:edc00d5040e0844f7bd50ee4bab1ab64
|
7.0 MB | Preview Download |
Additional details
Dates
- Available
-
2024-05-31