Tailoring the adhesion of electrophoretic chitosan/bioactive glass coatings by the combined surface pre-treatments of Ti substrates Agnieszka Kowalczyk, Agata Sotniczuk, Donata Kuczyńska-Zemła, Jarosław Pura, Zhiyan Xu, Aldo R. Boccaccini, Halina Garbacz This record contains all files generated in the preparation process of the following publication: Agnieszka Kowalczyk, Agata Sotniczuk, Donata Kuczyńska-Zemła, Jarosław Pura, Zhiyan Xu, Aldo R. Boccaccini, Halina Garbacz, "Tailoring the adhesion of electrophoretic chitosan/bioactive glass coatings by the combined surface pre-treatments of Ti substrates", submitted to Surface and Coatings Technology. Designations: Ti_G2 - Titanium Grade 2 G - sample grinded on #600 grit abrasive paper SP - sample shot-peened with 90-150 µm shots, under pressure of 0.5 MPa E - sample etched SP+E_HF - sample shot-peened with 90-150 µm shots, under the pressure of 0.5 MPa and etched in the hydrofluoric solution SP+E_NaOH - sample shot-peened with 90-150 µm shots, under the pressure of 0.5 MPa and etched in the sodium hydroxide solution SP+E_HF_NaOH - sample shot-peened with 90-150 µm shots, under the pressure of 0.5 MPa and etched first in the hydrofluoric solution and then in sodium hydroxide EPD - samples coated with chitosan/bioglass coating ADH - samples coated with chitosan/bioglass coating after conducted adhesion test SBF - samples after bioactivity test in Simulated Body Fluid (SBF) solution SEM - Scaning Electron Microscopy EDS - Energy Dispersive Spectroscopy Folders content: Corrosion - contains files with data of corrosion resistance, obtained during electrochemical tests FTIR - contains files obtained from Fourier Transform Infrared Spectroscopy analysis of chitosan/bioglass coating Roughness - contains files from topography analysis obtained using optical profilometer for various scan areas SEM - contains folders with images of samples surfaces from Scanning Electron Microscopes. Subfolders: Adhesion - contains SEM images of samples coated with chitosan/bioglass coatings after tape test Bioactivity test - contains SEM images and EDS analysis of samples coated with chitosan/bioglass coatings after bioactivity test in SBF Coatings - contains SEM images of chitosan/bioactive glass coatings deposited on different substrates Substrate - contains SEM images of titanium substrate after various surface modifications Wettability - contains files with data obtained from wettability tests XRD - contains files with data obtained from X-ray spectroscopy analysis This research was supported financially by the National Science Centre, Poland under the grant OPUS 23 [2022/45/B/ST5/03398].